MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105℃ LBK Series ・Downsizing of LBG series. ・For airbag application and power supply application ・High capacitance, low ESR and good low temperature behavior ・Endurance with ripple current : 5,000 hours at 105℃ ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・AEC-Q200 compliant : Please contact Chemi-Con for more details, test data, information. LBK Downsized LBG P226 ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Range Capacitance Tolerance Leakage Current -55 to +105℃ 25 & 35Vdc 2,500 to 14,000µF 0 to +30% (A) I=0.01CV Where, I : Max. leakage current (µA), C : Nominal capacitance (µF), V : Rated voltage (V) Rated voltage (Vdc) 25V 35V tanδ (Max.) 0.20 0.16 When nominal capacitance exceeds 1,000µF, add 0.02 to the value above for each 1,000µF increase. Rated voltage (Vdc) 25V 35V Z(-55℃)/Z(+20℃) 3 3 Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) (at 20℃, 120Hz) (at 20℃, 120Hz) (at 20℃ after 2 minutes) (at 20℃, 120Hz) (at 120Hz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjected to DC voltage with the rated ripple current is applied (the peak voltage shall not exceed the rated voltage) for 5,000 hours at 105℃. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after exposing them for 1,000 hours at 105℃ without voltage applied. Before the measurement, the capacitor shall be preconditioned by applying voltage according to Item 4.1 of JIS C 5101-4. Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦200% of the initial specified value Leakage current ≦The initial specified value Endurance Shelf Life ◆DIMENSIONS [mm] Code : E 18 φD 16 φd 0.8 0.8 7.5 7.5 F φD' φD+0.5max. L' L+1.5max. φD' φd Sleeve (PET : Dark blue) F±0.5 ●Terminal L' Vent 15min. 4min. Gas escape end seal ◆PART NUMBERING SYSTEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 E L BK AAA E AA AAA A AAA S Supplement code Size code Capacitance tolerance code Capacitance code (ex. 3,500µF:352, 14,000µF:143) Lead forming·taping code Terminal code Voltage code (ex. 25V:250, 35V:350) Series code Category Please refer to "Product code guide (radial lead type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 224 CAT. No. E1001Q MINIATURE ALUMINUM ELECTROLYTIC CAPACITORS For airbag module, 105℃ LBKSeries ◆STANDARD RATINGS Cap (μF) WV (Vdc) 35 20℃ 16 × 20 18 × 20 16 × 25 18 × 25 16 × 31.5 16 × 35.5 18 × 31.5 16 × 40 18 × 35.5 18 × 40 16 × 20 18 × 20 16 × 25 18 × 25 16 × 31.5 16 × 35.5 18 × 31.5 16 × 40 18 × 35.5 18 × 40 4,200 5,300 5,900 7,500 8,000 9,500 10,000 11,000 11,000 14,000 2,500 3,100 3,500 4,500 4,700 5,600 6,000 6,600 7,100 8,400 25 ESR (Ω max./100kHz) Case size φD×L (mm) -40℃ 0.033 0.029 0.024 0.022 0.021 0.019 0.019 0.017 0.017 0.015 0.033 0.029 0.024 0.022 0.021 0.019 0.019 0.017 0.017 0.015 0.095 0.082 0.073 0.063 0.052 0.046 0.045 0.040 0.040 0.035 0.095 0.082 0.073 0.063 0.052 0.046 0.045 0.040 0.040 0.035 Rated ripple current (mArms/105℃, 100kHz) 2,250 2,500 2,600 2,800 3,200 3,500 3,500 3,800 3,700 4,000 2,250 2,500 2,600 2,800 3,200 3,500 3,500 3,800 3,700 4,000 Part No. ELBK250E□□422AL20S ELBK250E□□532AM20S ELBK250E□□592AL25S ELBK250E□□752AM25S ELBK250E□□802ALN3S ELBK250E□□952ALP1S ELBK250E□□103AMN3S ELBK250E□□113AL40S ELBK250E□□113AMP1S ELBK250E□□143AM40S ELBK350E□□252AL20S ELBK350E□□312AM20S ELBK350E□□352AL25S ELBK350E□□452AM25S ELBK350E□□472ALN3S ELBK350E□□562ALP1S ELBK350E□□602AMN3S ELBK350E□□662AL40S ELBK350E□□712AMP1S ELBK350E□□842AM40S □□ : Enter the appropriate lead forming or taping code. ◆RATED RIPPLE CURRENT MULTIPLIERS ・Frequency Multipliers Capacitance(µF) Frequency(Hz) 2,500 to 3,500 4,200 to 14,000 120 0.75 0.85 1k 0.90 0.95 10k 0.95 0.98 100k 1.00 1.00 The endurance of capacitors is reduced with internal heating produced by ripple current at the rate of halving the lifetime with every 5℃ rise. When long life performance is required in actual use, the rms ripple current has to be reduced. Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 225 CAT. No. E1001Q