MACOM MAAPGM0064-DIE Variable drain voltage (4-10v) operation Datasheet

RoHS
Compliant
MAAPGM0064-DIE
Amplifier, Power, 2.0 W
6.5—9.5 GHz
Rev —
Preliminary Information
Features
♦
♦
♦
♦
2 Watt Saturated Output Power Level
Variable Drain Voltage (4-10V) Operation
MSAG™ Process
High Performance Ceramic Bolt Down Package
Description
The MAAPGM0064-DIE is a 2-stage 2 W power amplifier with on-chip
bias networks. This product is fully matched to 50 ohms on both the
input and output. It can be used as a power amplifier stage or as a
driver stage in high power applications.
Each device is 100% RF tested to ensure performance compliance.
The part is fabricated using M/A-COM’s GaAs Multifunction SelfAligned Gate Process.
Primary Applications
M/A-COM’s MSAG™ process features robust silicon-like
manufacturing processes, planar processing of
ion implanted
transistors and multiple implant capability enabling power, low-noise,
switch and digital FETs on a single chip. The use of refractory metals
and the absence of platinum in the gate metal formulation prevents
hydrogen poisoning when employed in hermetic packaging.
Also Available in:
Description
Ceramic Package
Part Number
MAAPGM0064
♦
♦
♦
Multiple Band Point-to-Point Radio
SatCom
ISM Band
SAMPLES
Sample Board (Die)
Mechanical Sample (Die)
MAAP-000064-SMB004
Not Available
1
2
Electrical Characteristics: TB = 40°C , Z0 = 50 Ω, VDD = 8V, IDQ ≈ 600 mA , Pin = 18 dBm, RG ≈ 120Ω
Parameter
Symbol
Typical
Units
Bandwidth
f
6.5-9.5
GHz
Output Power
POUT
34.5
dBm
Power Added Efficiency
PAE
30
%
1-dB Compression Point
P1dB
32
dBm
Small Signal Gain
G
20
dB
Input VSWR
VSWR
1.8:1
Output VSWR
VSWR
3.0:1
Gate Supply Current
IGG
<5
mA
Drain Supply Current
IDD
<1
mA
Noise Figure
NF
9.5
dB
2f
-20
dBc
2
nd
Harmonic
rd
1
3 Harmonic
3f
-45
dBc
Output Third Order Intercept
OTOI
41
dBm
3rd Order Intermodulation Distortion,
Single Carrier Level = 20 dBm
IM3
-10
dBm
5th Order Intermodulation Distortion,
Single Carrier Level = 20 dBm
IM5
-25
dBm
1. TB = MMIC Base Temperature
2. Adjust VGG between –2.6 and –1.2V to achieve specified Idq.
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAPGM0064-DIE
Amplifier, Power, 2.0 W
6.5—9.5 GHz
Rev —
Preliminary Information
Maximum Ratings 3
Parameter
Symbol
Absolute Maximum
Units
Input Power
PIN
23.0
dBm
Drain Supply Voltage
VDD
+12.0
V
Gate Supply Voltage
VGG
-3.0
V
Quiescent Drain Current (No RF, 40% Idss)
IDQ
950
mA
PDISS
7.9
W
Junction Temperature
TJ
170
°C
Storage Temperature
TSTG
-55 to +150
°C
Quiescent DC Power Dissipated (No RF)
3. Operation beyond these limits may result in permanent damage to the part.
Recommended Operating Conditions4
Characteristic
Symbol
Min
Typ
Max
Unit
Drain Supply Voltage
VDD
4.0
8.0
10.0
V
Gate Supply Voltage
VGG
-2.4
-2.0
-1.3
V
Input Power
PIN
18.0
21.0
dBm
Thermal Resistance
ΘJC
12.4
Package Base Temperature
TB
°C/W
Note 5
°C
4. Operation outside of these ranges may reduce product reliability.
5. MMIC Base Temperature = 170°C — ΘJC* VDD * IDQ
Operating Instructions
This device is static sensitive. Please handle with care. To operate the device,
follow these steps.
1. Apply VGG = -2.7 V, VDD= 0 V.
2. Ramp VDD to desired voltage, typically 8.0 V.
3. Adjust VGG to set IDQ, (approximately @ –2.0 V).
4. Set RF input.
5. Power down sequence in reverse. Turn VGG off last.
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAPGM0064-DIE
45
40
40
35
35
30
30
25
25
20
20
Output Power (dBm)
PAE (%)
15
15
10
10
5
5
0
0
6.5
7
7.5
8
8.5
9
9.5
30
4.0
25
3.5
20
3.0
Gain
Input VSWR
15
10
2.0
5
1.5
0
1.0
6.5
7.0
7.5
8.0
8.5
9.0
Frequency (GHz)
Frequency (GHz)
Figure 1. Output Power and Power Added Efficiency vs. Frequency @ PIN=18.0 dBm, VDD=8V,
IDQ=600 mA
Figure 2. Gain and Input VSWR vs. Frequency (VDD=8 V, IDQ=600 mA)
3
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
2.5
Input VSWR
45
Small Signal Gain (dB)
Rev —
Preliminary Information
PAE (%)
POUT (dBm)
Amplifier, Power, 2.0 W
6.5—9.5 GHz
9.5
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAPGM0064-DIE
Amplifier, Power, 2.0 W
6.5—9.5 GHz
Rev —
Preliminary Information
Mechanical Information
Chip Size: 2.95 x 2.95 x 0.075 mm
(116 x 116 x 3 mils)
Figure 3. Die Layout
Bond Pad Dimensions
Pad
Size (μm)
Size (mils)
RF In and Out
100 x 200
4x8
DC Drain Supply Voltage VDD
200 x 150
8x6
DC Gate Supply Voltage VGG
150 x 150
6x6
4
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
RoHS
Compliant
MAAPGM0064-DIE
Amplifier, Power, 2.0 W
6.5—9.5 GHz
Rev —
Preliminary Information
Assembly and Bonding Diagram
VDD
0.01-0.1 μF
0.01-0.1 μF
100200
pF
100200
pF
RFOUT
RFIN
100200
pF
VGG
40 Ω
100200
pF
0.01-0.1 μF
0.01-0.1 μF
Figure 4. Recommended operational configuration. Wire bond as shown.
Die Handling:
Refer to Application Note AN3016.
Assembly Instructions:
Die Attach: Use AuSn (80/20) 1 mil. preform solder. Limit time @ 310 °C to less than
7 minutes. Refer to Application Note AN3017 for more detailed information.
Wirebonding: Bond @ 160 °C using standard ball or thermal compression wedge
bond techniques. For DC pad connections, use either ball or wedge bonds. For best
RF performance, use wedge bonds of shortest length, although ball bonds are also
acceptable.
Biasing Note: Must apply negative bias to VGG before applying positive bias to VDD to prevent
damage to amplifier.
5
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Similar pages