New Product MURS340S & MURS360S Vishay General Semiconductor Surface Mount Ultrafast Plastic Rectifier FEATURES • Glass passivated chip junction • Ideal for automated placement • Ultrafast reverse recovery time • Low switching losses, high efficiency • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Solder dip 260 °C, 40 s DO-214AA (SMB) • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC PRIMARY CHARACTERISTICS IF(AV) 3.0 A VRRM 400 V, 600 V IFSM 35 A trr 50 ns VF at IF = 3.0 A 1.20 V TJ max. 175 °C TYPICAL APPLICATIONS For use in high frequency rectification and freewheeling application in switching mode converters and inverters for consumer, computer and telecommunication. MECHANICAL DATA Case: DO-214AA (SMB) Epoxy meets UL 94V-0 flammability rating Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD22-B102 E3 suffix for consumer grade, meets JESD 201 class 1A whisker test Polarity: Color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Device marking codes Maximum repetitive peak reverse voltage Maximum average forward rectified current (Fig. 1) VRRM (1) Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load Operating junction and storage temperature range MURS340S MURS360S 3GS 3JS 400 600 UNIT V IF(AV) 3.0 A IFSM 35 A TJ, TSTG - 65 to + 175 °C Note: (1) Units mounted on P.C.B. with 0.31 x 0.31" (8.0 x 8.0 mm) copper pad areas Document Number: 89110 Revision: 01-Aug-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 1 New Product MURS340S & MURS360S Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS SYMBOL MURS340S MURS360S UNIT Maximum instantaneous forward voltage (1) IF = 3.0 A TJ = 25 °C TJ = 150 °C VF 1.45 1.20 V Maximum instantaneous reverse current (2) rated VR TJ = 25 °C TJ = 150 °C IR 5.0 150 µA Maximum reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr 50 ns Maximum reverse recovery time IF = 1.0 A, dI/dt = 50 A/µs, VR = 30 V, Irr = 10 % IRM trr 75 ns Notes: (1) Pulse test: 300 µs pulse width, 1 % duty cycle (2) Pulse test: Pulse width ≤ 40 ms THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance (1) MURS340S MURS360S RθJM UNIT 12 °C/W Note: (1) Units mounted on P.C.B. with 8 x 8 mm, 1 oz. copper pad areas. Thermal resistance RθJM - junction to mount ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE MURS360S-E3/52T 0.093 52T 750 7" diameter plastic tape and reel MURS360S-E3/5BT 0.093 5BT 3200 13" diameter plastic tape and reel RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 4.4 D = 0.8 4.0 Average Power Loss (W) Average Forward Rectified Current (A) 3.0 2.0 1.0 TM Measured at Mount of Terminal D = 0.3 D = 0.5 3.6 D = 0.2 3.2 2.8 D = 0.1 2.4 D = 1.0 2.0 1.6 T 1.2 0.8 D = tp/T 0.4 0 tp 0 0 25 50 75 100 125 150 175 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 TM - Mount Temperature (°C) Average Forward Current (A) Figure 1. Forward Current Derating Curve Figure 2. Forward Power Loss Characteristics www.vishay.com 2 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] Document Number: 89110 Revision: 01-Aug-08 New Product MURS340S & MURS360S Vishay General Semiconductor 100 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 100 TA = 175 °C TA = 150 °C 1 TA = 100 °C TA = 125 °C 0.1 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10 TA = 25 °C 0.01 0 0.4 0.8 1.2 1.6 1 0.1 2.0 1 10 100 Instantaneous Forward Voltage (V) Reverse Voltage (V) Figure 3. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance Instantaneous Reverse Current (µA) 1000 TA = 175 °C 100 TA = 150 °C TA = 125 °C 10 TA = 100 °C 1 TA = 25 °C 0.1 0.01 10 20 30 40 50 60 70 80 90 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Characteristics PACKAGE OUTLINE DIMENSIONS in inches (millimeters) DO-214AA (SMB) Cathode Band Mounting Pad Layout 0.085 (2.159) MAX. 0.155 (3.94) 0.130 (3.30) 0.086 (2.20) 0.077 (1.95) 0.086 (2.18) MIN. 0.180 (4.57) 0.160 (4.06) 0.060 (1.52) MIN. 0.012 (0.305) 0.006 (0.152) 0.220 REF. 0.096 (2.44) 0.084 (2.13) 0.060 (1.52) 0.030 (0.76) 0.008 (0.2) 0 (0) 0.220 (5.59) 0.205 (5.21) Document Number: 89110 Revision: 01-Aug-08 For technical questions within your region, please contact one of the following: [email protected], [email protected], [email protected] www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1