HA178L02/56/06/09/10 Series 3-terminal Fixed Voltage Regulators REJ03D0918-0100 Rev.1.00 Jan 16, 2009 Description The HA178L02/56/06/09/10 series three-terminal fixed output voltage regulators. Can be used not only as stabilized power sources, but also as Zener diodes because of their small outline package. Features • • • • • Maximum output current: 150 mA (Tj = 25°C) Large maximum power dissipation: 800 mW Over current protection Temperature protection circuit Ordering Information Part No. HA178L02-TZ HA178L02P-TZ HA178L02A-TZ HA178L02PA-TZ HA178L02UA-TL HA178L56-TZ HA178L56P-TZ HA178L56A-TZ HA178L56PA-TZ HA178L56UA-TL HA178L06-TZ HA178L06P-TZ HA178L06A-TZ HA178L06PA-TZ HA178L06UA-TL HA178L09-TZ HA178L09P-TZ HA178L09A-TZ HA178L09PA-TZ HA178L09UA-TL HA178L10TZ HA178L10P-TZ HA178L10A-TZ HA178L10PA-TZ HA178L10UA-TL Output Voltage (V) Output Voltage Tolerance (%) Package Name Package Code Taping Abbreviation (Quantity) ±8 2.5 TO-92MOD PRSS0003DC-A TZ (2,500pcs/box) UPAK PLZZ0004CA-A TL (1,000pcs/reel) TO-92MOD PRSS0003DC-A TZ (2,500pcs/box) UPAK PLZZ0004CA-A TL (1,000pcs/reel) TO-92MOD PRSS0003DC-A TZ (2,500pcs/box) UPAK PLZZ0004CA-A TL (1,000pcs/reel) TO-92MOD PRSS0003DC-A TZ (2,500pcs/box) UPAK PLZZ0004CA-A TL (1,000pcs/reel) TO-92MOD PRSS0003DC-A TZ (2,500pcs/box) UPAK PLZZ0004CA-A TL (1,000pcs/reel) ±5 ±8 5.6 ±5 ±8 6 ±5 ±8 9 ±5 ±8 10 ±5 REJ03D0918-0100 Rev.1.00 Jan 16, 2009 Page 1 of 8 Application Commercial use Industrial use Commercial use Industrial use Commercial use Commercial use Industrial use Commercial use Industrial use Commercial use Commercial use Industrial use Commercial use Industrial use Commercial use Commercial use Industrial use Commercial use Industrial use Commercial use Commercial use Industrial use Commercial use Industrial use Commercial use HA178L02/56/06/09/10 Series Pin Arrangement • TO-92 MOD • UPAK 4 1 2 3 1. OUT 2. GND 3. IN 1 2 3 Block Diagram (3) IN Over Current Protection (1) OUT Error Amp. Vref = 2.5 V Reference Voltage Temperature Protection (2) GND Standard Circuit Input VIN CIN 0.33μF REJ03D0918-0100 Rev.1.00 Jan 16, 2009 Page 2 of 8 Output VOUT HA178Lxx COUT 0.1μF 1. OUT 2. GND 3. IN 4. GND HA178L02/56/06/09/10 Series UPAK Product (HA178LxxUA) Mark Patterns The mark patterns shown below are used on UPAK products, as the package is small. Note that the product code and mark pattern are different. The pattern is laser-printed. OUT (1) (2) (3) (4) GND Band mark IN (5) Notes: 1. Boxes (1) to (5) in the figures show the position of the letters or numerals, and are not actually marked on the package. 2. (1) and (2) show the product-specific mark pattern. Output Voltage (V) 2.5 5.6 6 9 10 Part No. HA178L02UA HA178L56UA HA178L06UA HA178L09UA HA178L10UA Mark Pattern (2 digit) 8A 8C 8D 8F 8G 3. (3) shows the production year code (the last digit of the year). 4. (4) shows the production month code. Production Month Marked Code 1 A 2 B 5. (5) shows the production week code. REJ03D0918-0100 Rev.1.00 Jan 16, 2009 Page 3 of 8 3 C 4 D 5 E 6 F 7 G 8 H 9 J 10 K 11 L 12 M HA178L02/56/06/09/10 Series Absolute Maximum Ratings (Ta = 25°C) Item Symbol Input voltage VIN Power dissipation PT Operating ambient temperature Storage temperature Topr Tstg Unit V mW Note TO-92 MOD *1 UPAK *2 °C °C 1,000 800 600 416 400 200 0 −20 0 25 50 75 85 100 Maximum Power Dissipation PT (mW) 1. Ta ≤ 25°C, If Ta >25°C, derate by 6.4 mW/°C (See figure A) 2. 15mm × 25mm × 0.7 mm alumina ceramic board, Ta ≤ 25°C (See figure B) Maximum Power Dissipation PT (mW) Note: Rating 35 800 800 –40 to +85 –55 to +150 1,200 1,000 (1) Non Board (2) 15mm × 25mm × 0.7mm Alumina Ceramic Board 800 (2) 600 400 (1) 200 0 25 50 75 100 125 Ambient Temperature Ta (°C) Ambient Temperature Ta (°C) Figure A Figure B REJ03D0918-0100 Rev.1.00 Jan 16, 2009 Page 4 of 8 150 HA178L02/56/06/09/10 Series Electrical Characteristics HA178L02 (VIN = 10 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Item Symbol Output voltage VOUT Line regulation ΔVOLINE Load regulation Output voltage ΔVOLOAD VOUT Quiescent current IQ Quiescent current change ΔIQ Ripple rejection ratio HA178L02PA HA178L02P HA178L02 HA178L02A HA178L02UA Unit Min Typ Max Min Typ Max 2.32 2.48 2.64 2.38 2.48 2.58 — 35 125 — 35 95 — 30 100 — 30 75 — 14 — — 14 — — 9.5 50 — 9.5 50 — 4.5 25 — 4.5 25 2.28 — 2.68 2.35 — 2.61 2.28 — 2.68 2.35 — 2.61 — 3.0 6.0 — 3.0 6.0 Test Conditions V Tj = 25°C mV Tj = 25°C 7 V ≤ VIN ≤ 20 V 8 V ≤ VIN ≤ 20 V 1.0 mA ≤ IOUT ≤ 150 mA mV 1.0 mA ≤ IOUT ≤ 100 mA Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA V 7 V ≤ VIN ≤ 20 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 9 V, 1.0 mA ≤ IOUT ≤ 70 mA mA — — 1.5 — — 1.5 — — 0.2 — — 0.1 RREJ — 60 — — 60 — dB ΔVOUT/ΔTj — +0.2 — — +0.2 — mV/°C mA Tj= 25°C 8.0 V ≤ VIN ≤ 20 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 8.0 V ≤ VIN < 18 V, Tj = 25°C Temperature coefficient of output voltage IOUT = 5 mA HA178L56 (VIN = 11 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Item Symbol Output voltage VOUT Line regulation ΔVOLINE Load regulation Output voltage ΔVOLOAD VOUT Quiescent current IQ Quiescent current change ΔIQ Ripple rejection ratio HA178L56PA HA178L56P HA178L56 HA178L56A HA178L56UA Unit Min Typ Max Min Typ Max 5.24 5.6 5.96 5.38 5.6 5.82 — 50 200 — 50 150 — 45 150 — 45 100 — 17 — — 17 — — 11 60 — 11 60 — 5.0 30 — 5.0 30 5.16 — 6.04 5.32 — 5.88 5.16 — 6.04 5.32 — 5.88 — 3.0 6.0 — 3.0 6.0 Test Conditions V Tj = 25°C mV Tj = 25°C 1.0 mA ≤ IOUT ≤ 150 mA mV Tj = 25°C 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA V 7.6 V ≤ VIN ≤ 21 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 11 V, 1.0 mA ≤ IOUT ≤ 70 mA mA — — 1.5 — — 1.5 — — 0.2 — — 0.1 RREJ — 58 — — 58 — dB coefficient of output voltage ΔVOUT/ΔTj — +0.1 — — +0.1 — mV/°C Dropout voltage VDROP — 1.7 — — 1.7 — V mA Tj= 25°C 8.5 V ≤ VIN ≤ 2.0 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 8.5 V ≤ VIN < 18.5 V, Tj = 25°C Temperature REJ03D0918-0100 Rev.1.00 Jan 16, 2009 Page 5 of 8 7.6 V ≤ VIN ≤ 21 V 8.5 V ≤ VIN ≤ 21 V IOUT = 5 mA Tj = 25°C HA178L02/56/06/09/10 Series HA178L06 (VIN = 11 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Item Output voltage Symbol VOUT Line regulation ΔVOLINE Load regulation ΔVOLOAD Output voltage Quiescent current VOUT IQ HA178L06PA HA178L06P HA178L06 HA178L06A HA178L06UA Unit Min Typ Max Min Typ Max 5.61 6.0 6.39 5.76 6.0 6.24 — 50 200 — 50 150 — 45 150 — 45 110 — 17.5 — — 17.5 — — 12 70 — 12 70 — 5.5 35 — 5.5 35 5.52 — 6.48 5.7 — 6.3 5.52 — 6.48 5.7 — 6.3 V Tj = 25°C mV Tj = 25°C mV Tj = 25°C V 8.1 V ≤ VIN ≤ 21 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 11 V, 1.0 mA ≤ IOUT ≤ 70 mA 3.0 6.0 — 3.0 6.0 — 1.5 — — 1.5 — — 0.2 — — 0.1 RREJ — 57 — — 57 — dB coefficient of output voltage ΔVOUT/ΔTj — +0.1 — — +0.1 — mV/°C Dropout voltage VDROP — 1.7 — — 1.7 — V Ripple rejection ratio 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA — ΔIQ 8.1 V ≤ VIN ≤ 21 V 9.0 V ≤ VIN ≤ 21 V 1.0 mA ≤ IOUT ≤ 150 mA — Quiescent current change Test Conditions mA mA Tj= 25°C 9.0 V ≤ VIN ≤ 20 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 9.0 V ≤ VIN < 19 V, Tj = 25°C Temperature IOUT = 5 mA Tj = 25°C HA178L09 (VIN = 15 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Item Output voltage Line regulation Load regulation Output voltage Quiescent current Quiescent current change Ripple rejection ratio Symbol VOUT ΔVOLINE ΔVOLOAD VOUT IQ ΔIQ HA178L09PA HA178L09P HA178L09 HA178L09A HA178L09UA Unit Min Typ Max Min Typ Max 8.42 9.0 9.58 8.64 9.0 9.36 — 80 230 — 80 200 — 20 160 — 20 160 — 24.5 — — 24.5 — — 17 90 — 17 90 — 8.0 45 — 8.0 45 8.28 — 9.72 8.55 — 9.45 8.28 — 9.72 8.55 — 9.45 — 3.1 6.5 — 3.1 6.5 — — 1.5 — — 1.5 — — 0.2 — — 0.1 Test Conditions V Tj = 25°C mV Tj = 25°C mV Tj = 25°C 12 V ≤ VIN ≤ 24 V 1.0 mA ≤ IOUT ≤ 150 mA 1.0 mA ≤ IOUT ≤ 100 mA 1.0 mA ≤ IOUT ≤ 40 mA V 11.4 V ≤ VIN ≤ 24 V, 1.0 mA ≤ IOUT ≤ 40 mA VIN = 15 V, 1.0 mA ≤ IOUT ≤ 70 mA mA mA RREJ — 55 — — 55 — dB coefficient of output voltage ΔVOUT/ΔTj — –0.15 — — –0.15 — mV/°C Dropout voltage VDROP — 1.7 — — 1.7 — V Tj= 25°C 12 V ≤ VIN ≤ 24 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 12 V ≤ V < 24 V, Tj = 25°C Temperature REJ03D0918-0100 Rev.1.00 Jan 16, 2009 Page 6 of 8 11.4 V ≤ VIN ≤ 24 V IOUT = 5 mA Tj = 25°C HA178L02/56/06/09/10 Series HA178L10 (VIN = 16 V, IOUT = 40 mA, 0°C ≤ Tj ≤ 125°C, CIN = 0.33 μF, COUT = 0.1 μF) Item Symbol Min Output voltage VOUT Line regulation ΔVOLINE Load regulation ΔVOLOAD Output voltage Quiescent current VOUT IQ HA178L10PA HA178L10P HA178L10 HA178L10A HA178L10UA Unit Typ Max Min Typ Max 9.35 10 10.65 9.6 10 10.4 — 80 230 — 80 230 — 30 170 — 30 170 — 26 — — 26 — — 18 90 — 18 90 — 8.5 45 — 8.5 45 9.2 — 10.8 9.5 — 10.5 9.2 — 10.8 9.5 — 10.5 V Tj = 25°C mV Tj = 25°C mV Tj = 25°C V 6.5 — 3.1 6.5 — 1.5 — — 1.5 — — 0.2 — — 0.1 RREJ — 54 — — 54 — dB 12.5 V ≤ VIN ≤ 25 V, 1.0 mA ≤ IOUT ≤ 40 mA mA coefficient of output voltage ΔVOUT/ΔTj — –0.2 — — –0.2 — mV/°C Dropout voltage VDROP — 1.7 — — 1.7 — V mA Tj= 25°C 13 V ≤ VIN ≤ 25 V, Tj = 25°C 1.0 mA ≤ IOUT ≤ 40 mA, Tj = 25°C f = 120 Hz, 13 V ≤ VIN < 24 V, Tj = 25°C Temperature REJ03D0918-0100 Rev.1.00 Jan 16, 2009 Page 7 of 8 1.0 mA ≤ IOUT ≤ 100 mA VIN = 16 V, 1.0 mA ≤ IOUT ≤ 70 mA 3.1 Ripple rejection ratio 13 V ≤ VIN ≤ 25 V 1.0 mA ≤ IOUT ≤ 40 mA — ΔIQ 12.5 V ≤ VIN ≤ 25 V 1.0 mA ≤ IOUT ≤ 150 mA — Quiescent current change Test Conditions IOUT = 5 mA Tj = 25°C HA178L02/56/06/09/10 Series Package Dimensions Package Name TO-92 Mod JEITA Package Code SC-51 RENESAS Code PRSS0003DC-A Previous Code TO-92 Mod / TO-92 ModV MASS[Typ.] 0.35g 4.8 ± 0.4 Unit: mm 2.3 Max 0.65 ± 0.1 0.75 Max 0.7 0.60 Max 0.55 Max 10.1 Min 8.0 ± 0.5 3.8 ± 0.4 0.5 Max 1.27 2.54 1.5 1.5 3.0 REJ03D0918-0100 Rev.1.00 Jan 16, 2009 Page 8 of 8 MASS[Typ.] 0.050g 1.5 ± 0.1 0.44 Max 2.5 ± 0.1 4.25 Max 0.53 Max 0.48 Max 0.8 Min φ1 0.4 4.5 ± 0.1 1.8 Max Previous Code UPAK / UPAKV Unit: mm (1.5) 0.44 Max (0.2) RENESAS Code PLZZ0004CA-A (2.5) JEITA Package Code SC-62 (0.4) Package Name UPAK Sales Strategic Planning Div. Nippon Bldg., 2-6-2, Ohte-machi, Chiyoda-ku, Tokyo 100-0004, Japan Notes: 1. This document is provided for reference purposes only so that Renesas customers may select the appropriate Renesas products for their use. Renesas neither makes warranties or representations with respect to the accuracy or completeness of the information contained in this document nor grants any license to any intellectual property rights or any other rights of Renesas or any third party with respect to the information in this document. 2. Renesas shall have no liability for damages or infringement of any intellectual property or other rights arising out of the use of any information in this document, including, but not limited to, product data, diagrams, charts, programs, algorithms, and application circuit examples. 3. You should not use the products or the technology described in this document for the purpose of military applications such as the development of weapons of mass destruction or for the purpose of any other military use. When exporting the products or technology described herein, you should follow the applicable export control laws and regulations, and procedures required by such laws and regulations. 4. All information included in this document such as product data, diagrams, charts, programs, algorithms, and application circuit examples, is current as of the date this document is issued. Such information, however, is subject to change without any prior notice. Before purchasing or using any Renesas products listed in this document, please confirm the latest product information with a Renesas sales office. Also, please pay regular and careful attention to additional and different information to be disclosed by Renesas such as that disclosed through our website. (http://www.renesas.com ) 5. Renesas has used reasonable care in compiling the information included in this document, but Renesas assumes no liability whatsoever for any damages incurred as a result of errors or omissions in the information included in this document. 6. When using or otherwise relying on the information in this document, you should evaluate the information in light of the total system before deciding about the applicability of such information to the intended application. Renesas makes no representations, warranties or guaranties regarding the suitability of its products for any particular application and specifically disclaims any liability arising out of the application and use of the information in this document or Renesas products. 7. With the exception of products specified by Renesas as suitable for automobile applications, Renesas products are not designed, manufactured or tested for applications or otherwise in systems the failure or malfunction of which may cause a direct threat to human life or create a risk of human injury or which require especially high quality and reliability such as safety systems, or equipment or systems for transportation and traffic, healthcare, combustion control, aerospace and aeronautics, nuclear power, or undersea communication transmission. If you are considering the use of our products for such purposes, please contact a Renesas sales office beforehand. Renesas shall have no liability for damages arising out of the uses set forth above. 8. Notwithstanding the preceding paragraph, you should not use Renesas products for the purposes listed below: (1) artificial life support devices or systems (2) surgical implantations (3) healthcare intervention (e.g., excision, administration of medication, etc.) (4) any other purposes that pose a direct threat to human life Renesas shall have no liability for damages arising out of the uses set forth in the above and purchasers who elect to use Renesas products in any of the foregoing applications shall indemnify and hold harmless Renesas Technology Corp., its affiliated companies and their officers, directors, and employees against any and all damages arising out of such applications. 9. You should use the products described herein within the range specified by Renesas, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. Renesas shall have no liability for malfunctions or damages arising out of the use of Renesas products beyond such specified ranges. 10. Although Renesas endeavors to improve the quality and reliability of its products, IC products have specific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. Please be sure to implement safety measures to guard against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a Renesas product, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other applicable measures. Among others, since the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or system manufactured by you. 11. In case Renesas products listed in this document are detached from the products to which the Renesas products are attached or affixed, the risk of accident such as swallowing by infants and small children is very high. You should implement safety measures so that Renesas products may not be easily detached from your products. Renesas shall have no liability for damages arising out of such detachment. 12. This document may not be reproduced or duplicated, in any form, in whole or in part, without prior written approval from Renesas. 13. Please contact a Renesas sales office if you have any questions regarding the information contained in this document, Renesas semiconductor products, or if you have any other inquiries. http://www.renesas.com RENESAS SALES OFFICES Refer to "http://www.renesas.com/en/network" for the latest and detailed information. Renesas Technology America, Inc. 450 Holger Way, San Jose, CA 95134-1368, U.S.A Tel: <1> (408) 382-7500, Fax: <1> (408) 382-7501 Renesas Technology Europe Limited Dukes Meadow, Millboard Road, Bourne End, Buckinghamshire, SL8 5FH, U.K. Tel: <44> (1628) 585-100, Fax: <44> (1628) 585-900 Renesas Technology (Shanghai) Co., Ltd. Unit 204, 205, AZIACenter, No.1233 Lujiazui Ring Rd, Pudong District, Shanghai, China 200120 Tel: <86> (21) 5877-1818, Fax: <86> (21) 6887-7858/7898 Renesas Technology Hong Kong Ltd. 7th Floor, North Tower, World Finance Centre, Harbour City, Canton Road, Tsimshatsui, Kowloon, Hong Kong Tel: <852> 2265-6688, Fax: <852> 2377-3473 Renesas Technology Taiwan Co., Ltd. 10th Floor, No.99, Fushing North Road, Taipei, Taiwan Tel: <886> (2) 2715-2888, Fax: <886> (2) 3518-3399 Renesas Technology Singapore Pte. Ltd. 1 Harbour Front Avenue, #06-10, Keppel Bay Tower, Singapore 098632 Tel: <65> 6213-0200, Fax: <65> 6278-8001 Renesas Technology Korea Co., Ltd. Kukje Center Bldg. 18th Fl., 191, 2-ka, Hangang-ro, Yongsan-ku, Seoul 140-702, Korea Tel: <82> (2) 796-3115, Fax: <82> (2) 796-2145 Renesas Technology Malaysia Sdn. Bhd Unit 906, Block B, Menara Amcorp, Amcorp Trade Centre, No.18, Jln Persiaran Barat, 46050 Petaling Jaya, Selangor Darul Ehsan, Malaysia Tel: <603> 7955-9390, Fax: <603> 7955-9510 © 2009. Renesas Technology Corp., All rights reserved. Printed in Japan. Colophon .7.2