ASW105 5 ~ 4000 MHz MMIC Amplifier Features Description 19.3 dB Gain at 900 MHz The ASW105, a power amplifier MMIC, has a high linearity, high gain, and high efficiency over a wide range of frequency, being suitable for use in both receiver and transmitter of telecommunication systems up to 4 GHz. The amplifier is available in a SOT89 package and passes through the stringent DC, RF, and reliability tests. 17.5 dBm P1dB at 900 MHz 31.5 dBm Output IP3 at 900 MHz 1.7 dB NF at 900 MHz MTTF > 100 Years Single Supply ASW105 Package Style: SOT89 Typical Performance (Supply Voltage = +3.3 V, TA = +25 C, Zo = 50 ) Application Circuit Parameters Units Typical Frequency MHz 150 900 2000 500 ~ 3500 MHz Gain dB 21.0 19.3 17.5 IF (50 ~ 450 MHz) S11 dB -12 -16 -16 S22 dB -12 -11 -11 Output IP31) dBm 32.0 31.5 31.5 Noise Figure dB 1.7 1.7 1.8 Output P1dB dBm 18.5 17.5 18.5 Current mA 65 65 65 Device Voltage V +3.3 +3.3 +3.3 Typ Max DMB 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1 MHz. Product Specifications Parameters Units Min Testing Frequency MHz 900 Gain dB 19.3 S11 dB -16 S22 dB -11 Output IP3 dBm 31.5 Noise Figure dB 1.7 Output P1dB dBm 17.5 Current mA 65 Device Voltage V +3.3 Pin Configuration Absolute Maximum Ratings Parameters Rating Operating Case Temperature -40 to 85 C Storage Temperature -40 to 150 C Device Voltage +4.3 V Operating Junction Temperature +150 C Pin No. Function Input RF Power (Continuous)* +22 dBm 1 RF IN Thermal Resistance 182 C/W 2 GND 3 RF OUT & Bias * Please find the max. input power data from http://www.asb.co.kr/pdf/Maximum_Input_Power_Analysis.pdf 1/7 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW105 5 ~ 4000 MHz MMIC Amplifier Outline Drawing Part No. Lot No. Symbols A L b b1 C D D1 E E1 e1 H S e ASW105 Pxxxx Dimensions (In mm) MIN NOM 1.40 1.50 0.89 1.04 0.36 0.42 0.41 0.47 0.38 0.40 4.40 4.50 1.40 1.60 3.64 --2.40 2.50 2.90 3.00 0.35 0.40 0.65 0.75 1.40 1.50 Pin No. Function 1 RF IN 2 GND 3 RF OUT & Bias MAX 1.60 1.20 0.48 0.53 0.43 4.60 1.75 4.25 2.60 3.10 0.45 0.85 1.60 Mounting Recommendation (In mm) Note: 1. The number and size of ground via holes in a circuit board is critical for thermal and RF grounding considerations. 2. We recommend that the ground via holes be placed on the bottom of the lead pin 2 and exposed pad of the device for better RF and thermal performance, as shown in the drawing at the left side. ESD Classification & Moisture Sensitivity Level ESD Classification HBM Class 1A Voltage Level: 400 V MM Class A Voltage Level: 50 V CAUTION: ESD-sensitive device! Moisture Sensitivity Level (MSL) Level 3 at 260 C reflow 2/7 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW105 5 ~ 4000 MHz MMIC Amplifier APPLICATION CIRCUIT Wide Band 500 ~ 3500 MHz +3.3 V Frequency (MHz) 900 2000 2400 2700 Magnitude S21 (dB) 19.3 17.5 16.9 16.3 Magnitude S11 (dB) -16 -16 -18 -18 Magnitude S22 (dB) -11 -11 -10 -10 Output P1dB (dBm) 17.5 18.5 17.5 17.5 Output IP31) (dBm) 31.5 31.5 32.0 33.5 Noise Figure (dB) 1.7 1.8 1.8 2.0 Device Voltage (V) +3.3 +3.3 +3.3 +3.3 Current (mA) 65 65 65 65 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=3.3 V C4=1 F C3=100 pF L1=33 nH C1=56 pF RF IN C2=56 pF RF OUT ASW105 L2=33 nH 25 0 20 -5 15 -10 S11 (dB) Gain (dB) S-parameters & K-factor 10 5 -15 -20 0 0 500 1000 1500 2000 2500 3000 3500 -25 0 500 1000 Frequency (MHz) 0 2000 2500 3000 3500 2500 3000 3500 5 4 Stability Factor -5 S22 (dB) 1500 Frequency (MHz) -10 3 2 -15 1 -20 0 500 1000 1500 2000 2500 3000 3500 0 0 500 Frequency (MHz) 3/7 1000 1500 2000 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW105 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 70 150 300 450 Magnitude S21 (dB) 22 21 20 20 Magnitude S11 (dB) -6 -12 -14 -15 Magnitude S22 (dB) -18 -12 -12 -12 IF Output P1dB (dBm) 18.5 18.5 18.5 18.5 50 ~ 450 MHz Output IP31) (dBm) 31.5 32.5 33.5 33.5 Noise Figure (dB) 2.1 1.7 1.7 1.7 Device Voltage (V) +3.3 +3.3 +3.3 +3.3 Current (mA) 65 65 65 65 APPLICATION CIRCUIT +3.3 V 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=3.3 V C4=1 F C3=100 pF L1=150 nH C1=10 nF RF IN C2=100 pF RF OUT ASW105 L2=180 nH S-parameters & K-factor 30 0 25 -5 -10 S11 (dB) Gain (dB) 20 15 -15 10 -20 5 0 0 100 200 300 400 500 -25 0 100 200 Frequency (MHz) 0 5 -5 4 Stability Factor S22 (dB) -10 -15 -20 -25 400 500 3 2 1 0 100 200 300 400 500 0 0 500 Frequency (MHz) 4/7 300 Frequency (MHz) 1000 1500 2000 2500 3000 3500 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW105 5 ~ 4000 MHz MMIC Amplifier Frequency (MHz) 145 245 Magnitude S21 (dB) 21.0 20.5 Magnitude S11 (dB) -12 -14 Magnitude S22 (dB) -12 -12 DMB Output P1dB (dBm) 18 18 145 ~ 245 MHz Output IP31) (dBm) 31.5 32.0 Noise Figure (dB) 1.9 1.8 Device Voltage (V) +3.3 +3.3 Current (mA) 65 65 APPLICATION CIRCUIT +3.3 V 1) OIP3 is measured with two tones at an output power of +5 dBm/tone separated by 1MHz. Board Layout (FR4, 40x40 mm2, 0.8T) Schematic Vs=3.3 V C4=1 F C3=100 pF L1=150 nH C1=1 nF RF IN C2=100 pF RF OUT ASW105 L2=120 nH S-parameters & K-factor 30 0 25 -5 -10 S11 (dB) Gain (dB) 20 15 -15 10 -20 5 0 0 50 100 150 200 250 300 -25 0 50 100 Frequency (MHz) 5 -5 4 Stability Factor 0 S22 (dB) -10 -15 250 300 3 2 0 50 100 150 200 250 300 0 0 500 1000 1500 2000 2500 3000 3500 Frequency (MHz) Frequency (MHz) 5/7 200 1 -20 -25 150 Frequency (MHz) ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW105 5 ~ 4000 MHz MMIC Amplifier Performance with varying Current VDEVICE (V) +3.3 +3.3 +3.3 +3.3 6/7 RD (ohm) 0 3.3 7.5 18 Current (mA) 66 50 39 26 Freq. (MHz) Gain (dB) S11 (dB) S22 (dB) OIP3 (dBm) P1dB (dBm) NF (dB) 900 19.7 -19.6 -10.8 34.1 18.3 1.28 2000 17.8 -17.1 -12.2 33.5 19.1 1.39 2700 16.6 -21.2 -10.6 34.7 18.3 1.56 3500 15.6 -23.2 -11.4 32.2 18.9 1.65 900 19.4 -17.5 -12.1 31.7 17.5 1.25 2000 17.6 -15.5 -12.4 31.2 18.0 1.36 2700 16.3 -18.3 -10.7 32.4 17.4 1.51 3500 15.3 -20.6 -11.4 30.2 17.7 1.60 900 18.9 -15.2 -14.2 29.1 16.2 1.26 2000 17.1 -13.8 -12.9 28.3 16.1 1.35 2700 16.0 -16.5 -10.8 29.8 16.2 1.50 3500 15.1 -18.0 -11.2 28.2 15.7 1.58 900 17.6 -11.5 -18.7 28.6 14.2 1.27 2000 16.1 -10.8 -12.6 28.0 12.1 1.37 2700 15.1 -12.7 -10.4 28.1 13.3 1.55 3500 14.3 -13.7 -10.3 29.7 12.3 1.62 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017 ASW105 5 ~ 4000 MHz MMIC Amplifier Recommended Soldering Reflow Profile 260 C Ramp-up (3 C/sec) 20~40 sec Ramp-down (6 C/sec) 200 C 150 C 60~180 sec Copyright 2010-2017 ASB Inc. All rights reserved. Datasheet subject to change without notice. ASB assumes no responsibility for any errors which may appear in this datasheet. No part of the datasheet may be copied or reproduced in any form or by any means without the prior written consent of ASB. 7/7 ASB Inc. [email protected] Tel: +82-42-528-7225 April 2017