AVAGO HDSP-A151 7.6 mm (0.3 inch) micro bright seven segment display Datasheet

HDSP-740x Series
7.6 mm (0.3 inch) Micro Bright
Seven Segment Displays
Data Sheet
HDSP-740x Series, HDSP-750x Series, HDSP-780x Series,
HDSP-A15x Series, HDSP-A40x Series
Description
The 7.6 mm (0.3 inch) LED seven segment displays
are designed for viewing distances up to 3 metres (10
feet). These devices use an industry standard size
package and pinout. Both the numeric and ± 1. overflow devices feature a right hand decimal point. All
devices are available as either common anode or
common cathode.
These displays are ideal for most applications. Pin for
pin equivalent displays are also available in a low
current design. The low current displays are ideal for
portable applications. For additional information see
the Low Current Seven Segment Displays.
Devices
Features
• Available with colon for clock display
• Compact package
0.300 x 0.500 inches
Leads on 2.54 mm (0.1 inch) centers
• Choice of colors
AlGaAs Red, High Efficiency Red, Yellow, Green, Orange
• Excellent appearance
Evenly lighted segments
Mitered corners on segments
Surface color gives optimum contrast
±50° viewing angle
• Design flexibility
Common anode or common cathode
Right hand decimal point
±1. overflow character
• Categorized for luminous intensity
Yellow and Green categorized for color
Use of like categories yields a uniform display
• High light output
• High peak current
• Excellent for long digit string multiplexing
• Intensity and color selection available
See Intensity and Color Selected Displays data sheet
• Sunlight viewable AlGaAs
Orange
HDSP-
AlGaAs[1]
HDSP-
HER[1]
HDSP-
Yellow[1]
HDSP-
Green[1]
HDSP-
A401
A151
7501
7401
7801
Common Anode Right
Hand Decimal
A
7502
7402
7802
Common Anode Right Hand
Decimal, Colon
B
7503
7403
7803
Common Cathode Right
Hand Decimal
C
7504
7404
7804
Common Cathode Right Hand
Decimal, Colon
D
A157
7507
7407
7807
Common Anode ± 1. Overflow
E
A158
7508
7408
7808
Common Cathode ± 1. Overflow
F
A403
A153
Description
Package
Drawing
Note:
1. These displays are recommended for high ambient light operation. Please refer to the HDSP-A10X AlGaAs, HDSP-335X HER, HDSPA80X Yellow, and HDSP-A90X Green data sheet for low current operation.
Part Numbering System
5082 -X X X X-X X X X X
HDSP-X X X X-X X X X X
Mechanical Options[1]
00: No Mechanical Option
Color Bin Options[1,2]
0: No Color Bin Limitation
3: Color Bins 3- and 3+ only (applicable for Yellow devices only)
Z: Color Bins 2- and 3+ only (applicable for Yellow devices only)
Maximum Intensity Bin[1,2]
0: No Maximum Intensity Bin Limitation
Minimum Intensity Bin[1,2]
0: No Minimum Intensity Bin Limitation
Device Configuration/Color[1]
1: Common Anode
2: Common Anode
3: Common Cathode
4: Common Cathode
Device Specific Configuration[1]
Refer to Respective Datasheet
Package[1]
A: 7.6 mm (0.3 inch) Single Digit Seven Segment Display
Notes:
1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest
Avago representative for details.
2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1
bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information.
2
Package Dimensions
NOTES:
1. ALL DIMENSIONS IN MILLIMETRES (INCHES).
2. MAXIMUM.
3. ALL UNTOLERANCED DIMENSIONS ARE
FOR REFERENCE ONLY.
4. REDUNDANT ANODES.
5. REDUNDANT CATHODES.
6. FOR HDSP-7400/-7800 SERIES PRODUCT ONLY.
Internal Circuit Diagram
A
3
B
C
D
E
F
Absolute Maximum Ratings
AlGaAs Red
HDSP-A150
Series
Description
Average Power per Segment or DP
HER/Orange
Yellow
HDSP-7500/-A40X HDSP-7400
Series
Series
Green
HDSP-7800
Series
Units
96
105
80
105
mW
Peak Forward Current per
Segment or DP
160[1]
90[3]
60[5]
90[7]
mA
DC Forward Current per
Segment or DP
40[2]
30[4]
20[6]
30[8]
mA
Operating Temperature Range
–20 to +100[9]
°C
–40 to +100
Storage Temperature Range
°C
–55 to +100
Reverse Voltage per Segment or DP
3.0
V
Wave Soldering Temperature for
3 Seconds (1.59 mm [0.063 in.]
below Body)
250
°C
Notes:
1. See Figure 1 to establish pulsed conditions.
2. Derate above 46°C at 0.54 mA/°C.
3. See Figure 6 to establish pulsed conditions.
4. Derate above 53°C at 0.45 mA/°C.
5. See Figure 7 to establish pulsed conditions.
6. Derate above 81°C at 0.52 mA/°C.
7. See Figure 8 to establish pulsed conditions.
8. Derate above 39°C at 0.37 mA/°C.
9. For operation below –20°C, contact your local Avago components sales office or an authorized distributor.
Electrical/Optical Characteristics at TA = 25°C
AlGaAs Red
Device
Series
HDSP-
Parameter
Symbol
Min.
Typ.
Luminous
(Digit Average)
IV
6.9
14.0
mcd
IF = 20 mA
1.8
V
IF = 20 mA
Forward Voltage/Segment or DP
VF
V
IF = 100 mA
Intensity/Segment[1,2,5]
2.0
A15x
3.0
Units
λPEAK
645
nm
Wavelength[3]
λd
637
nm
Reverse Voltage/Segment or DP[4]
VR
15.0
V
Peak Wavelength
Dominant
4
Max.
3.0
Temperature Coefficient of
VF /Segment or DP
∆VF /°C
-2
mV/°C
Thermal Resistance LED Junctionto-Pin
RθJ-PIN
255
°C/W/Seg
Test Conditions
IR = 100 µA
High Efficiency Red
Device
Series
HDSP-
Parameter
Symbol
Luminous Intensity/Segment[1,2,6]
(Digit Average)
Min.
Typ.
360
980
Max.
Units
µcd
IV
750x
Peak Wavelength
Dominant Wavelength[3]
Reverse Voltage/Segment or
DP[4]
VF
2.0
λPEAK
635
nm
λd
626
nm
30
V
VR
3.0
IF = 5 mA
IF = 20 mA
5390
Forward Voltage/Segment or DP
Test Conditions
2.5
V
Temperature Coefficient of
VF /Segment or DP
∆VF /°C
-2
mV/°C
Thermal Resistance LED Junctionto-Pin
RθJ-PIN
200
°C/W/Seg
IF = 20 mA
IR = 100 µA
Orange
Device
Series
HDSP-
A40x
5
Parameter
Symbol
Min.
Typ.
Max.
Units
Luminous Intensity/Segment[1,2,6]
(Digit Average)
IV
0.70
Forward Voltage/Segment or DP
VF
2.0
λPEAK
600
nm
Dominant Wavelength[3]
λd
603
nm
Reverse Voltage/Segment or DP[4]
VR
30
V
Peak Wavelength
3.0
2.5
Test Conditions
mcd
IF = 5 mA
V
IF = 20 mA
Temperature Coefficient of
VF /Segment or DP
∆VF /°C
-2
mV/°C
Thermal Resistance LED Junctionto-Pin
RθJ-PIN
200
°C/W/Seg
IR = 100 µA
Yellow
Device
Series
HDSP-
Parameter
Symbol
Luminous Intensity/Segment[1,2,7]
(Digit Average)
Min.
Typ.
225
480
Max.
Units
µcd
IV
740x
Peak Wavelength
Dominant
Wavelength[3,9]
Reverse Voltage/Segment or
DP[4]
VF
2.2
λPEAK
583
IF = 5 mA
IF = 20 mA
2740
Forward Voltage/Segment or DP
Test Conditions
2.5
V
IF = 20 mA
nm
λd
581.5
586
VR
3.0
50.0
V
592.5
nm
Temperature Coefficient of
VF /Segment or DP
∆VF /°C
-2
mV/°C
Thermal Resistance LED Junctionto-Pin
RθJ-PIN
200
°C/W/Seg
IR = 100 µA
High Performance Green
Device
Series
HDSP-
Parameter
Symbol
Intensity/Segment[1,2,8]
Luminous
(Digit Average)
Min.
Typ.
860
3000
Max.
Units
µcd
IV
780x
Peak Wavelength
Dominant
Wavelength[3,9]
Reverse Voltage/Segment or DP[4]
VF
2.1
λPEAK
566
λd
571
VR
3.0
IF = 10 mA
IF = 20 mA
6800
Forward Voltage/Segment or DP
Test Conditions
2.5
V
IF = 10 mA
nm
577
nm
50.0
V
Temperature Coefficient of
VF /Segment or DP
∆VF /°C
-2
mV/°C
Thermal Resistance LED Junctionto-Pin
RθJ-PIN
200
°C/W/Seg
IR = 100 µA
Notes:
1. Case temperature of device immediately prior to the intensity measurement is 25°C.
2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package.
3. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of
the device.
4. Typical specification for reference only. Do not exceed absolute maximum ratings.
5. For low current operation the AlGaAs HDSP-A101 series displays are recommended.
6. For low current operation the HER HDSP-7511 series displays are recommended.
7. For low current operation the Yellow HDSP-A801 series displays are recommended.
8. For low current operation the Green HDSP-A901 series displays are recommended.
9. The yellow (HDSP-7400) and Green (HDSP-7800) displays are categorized for dominant wavelength. The category is designated by a
number adjacent to the luminous intensity category letter.
6
I F PEAK RATIO OF MAXIMUM OPERATING
I DC MAX PEAK CURRENT TO TEMPERATURE
DERATED MAXIMUM DC CURRENT
AlGaAs Red
100
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
10
100
z
0H
10
z
Hz
0H
30
Hz
10
1K
1
3K
Z
KH
10
1
1000
10000
DC OPERATION
t P – PULSE DURATION – µs
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 1. Maximum Allowed Peak Current vs.
Pulse Duration – AlGaAs Red.
IDC MAX. – MAXIMUM DC CURRENT
PER SEGMENT – mA
50
RθJ-A = 770°C/W
45
AlGaAs RED
40
35
30
25
20
15
10
5
0
20 30
40
50 60
70 80
90 100 110 120
160
140
120
AlGaAs RED
100
80
60
40
20
0
0
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 20 mA)
2.00
1.75
AlGaAs RED
1.50
1.25
1.00
0.75
0.50
0.25
0
5
10
15
20
25
30
35
40
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 4. Relative Luminous Intensity
vs. DC Forward Current.
7
1.0
1.5
2.0
2.5
3.0
3.5
4.0
Figure 3. Forward Current vs.
Forward Voltage.
ηPEAK – NORMALIZED RELATIVE EFFICIENCY
Figure 2. Maximum Allowable DC
Current per Segment as a Function of
Ambient Temperature.
0
0.5
VF – FORWARD CURRENT – V
TA – AMBIENT TEMPERATURE – °C
1.4
1.2
1.0
AlGaAs RED
0.8
0.6
0.5
5.0
50.0
150.0
IPEAK – PEAK FORWARD CURRENT PER SEGMENT – mA
Figure 5. Relative Efficiency (Luminous
Intensity per Unit Current) vs. Peak Current.
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
10
IDC MAX – MAXIMUM DC CURRENT
PER SEGMENT – mA
40
35
30
25
YELLOW
40
HER / ORANGE
20
GREEN
8
5.0
HER, ORANGE
GREEN
20
YELLOW
15
10
5
40
50
60
70 80
90 100 110 120
TA – AMBIENT TEMPERATURE – °C
Figure 9. Maximum Allowable DC Current per
Segment as a Function of Ambient Temperature.
RELATIVE LUMINOUS INTENSITY
(NORMALIZED TO 1 AT 5 mA FOR HER AND )t
(YELLOW AND TO 1 AT 10 mA FOR GREEN)
IF – FORWARD CURRENT PER SEGMENT – mA
60
Rθ
= 770°C/W
J-A
12
10
HER / ORANGE
8
YELLOW
6
4
GREEN
2
0
0
5
10
15
20
25
30
IF – FORWARD CURRENT PER SEGMENT – mA
Figure 11. Relative Luminous
Intensity vs. DC Forward Current.
ηPEAK – RELATIVE EFFICIENCY
(NORMALIZED TO 1 AT 5 mA FOR HER,
ORANGE AND YELLOW, AND 10 mA FOR GREEN)
I F PEAK RATIO OF MAXIMUM OPERATING
PEAK CURRENT TO TEMPERATURE
I DC MAX
DERATED DC CURRENT
z
80
Figure 10. Forward Current vs.
Forward Voltage Characteristics.
10000
z
H
H
10000
100
VF – FORWARD VOLTAGE – V
z
0
z
Z
1000
4.0
1000
45
0
20 30
DC OPERATION
3.0
Z
H
0
10 Hz
10
0
z
H
K
H
H
K
K
30
1
3
10
1
2.0
H
10
1.0
0
50
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
Figure 8. Allowable Peak Current vs.
Pulse Duration – Green.
0
100
Figure 7. Maximum Tolerable Peak
Current vs. Pulse Duration – Yellow.
t P – PULSE DURATION – µs
0
K
10
t P – PULSE DURATION – µs
100
100
30
DC OPERATION
1
Figure 6. Maximum Tolerable Peak Current vs.
Pulse Duration – HER, Orange.
10
1
z
1
10000
t P – PULSE DURATION – µs
1
z
1000
H
100
H
10
K
DC OPERATION
1
K
Hz
z
10
0
H
OPERATION IN THIS
REGION REQUIRES
TEMPERATURE
OPERATING OF I DC
MAXIMUM
3
0
0
30
Hz
Hz
1K
3K
Z
KH
1
10
100
10
I F PEAK RATIO OF MAXIMUM OPERATING
I DC MAX PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
100
10
I F PEAK RATIO OF MAXIMUM OPERATING
I DC MAX PEAK CURRENT TO TEMPERATURE
DERATED DC CURRENT
HER, Yellow, Green, Orange
1.8
YELLOW
1.6
HER / ORANGE
1.4
GREEN
1.2
1.0
0.8
0
20
40
60
80
100
IPEAK – PEAK FORWARD CURRENT
PER SEGMENT – mA
Figure 12. Relative Efficiency (Luminous
Intensity per Unit Current) vs. Peak
Current.
Intensity Bin Limits (mcd)
AlGaAs Red
HDSP-A15x
IV Bin Category
Min.
M
7.07
N
10.60
O
15.90
P
23.90
Q
35.80
Yellow
Max.
13.00
19.40
29.20
43.80
65.60
HER
HDSP-750x
IV Bin Category
Min.
B
0.342
C
0.516
D
0.774
E
1.160
F
1.740
G
2.610
H
3.915
Max.
0.630
0.946
1.418
2.127
3.190
4.785
7.177
Orange
IV Bin Category
A
B
C
D
E
F
G
H
I
J
K
L
M
N
9
HDSP-A40X
Min.
0.284
0.354
0.443
0.554
0.692
0.856
1.082
1.352
1.692
2.114
2.641
3.300
4.127
5.157
Max.
0.433
0.541
0.677
0.846
1.057
1.322
1.652
2.066
2.581
3.227
4.034
5.042
6.303
7.878
HDSP-740x
IV Bin Category
Min.
B
0.229
C
0.317
D
0.476
E
0.714
F
1.073
G
1.609
H
2.413
Max.
0.387
0.582
0.872
1.311
1.967
2.950
4.425
Green
HDSP-780x
IV Bin Category
Min.
H
0.86
I
1.29
J
1.94
K
2.90
L
4.37
Max.
1.58
2.37
3.55
5.33
8.01
Color Categories
Color
Yellow
Green
Bin
1
3
2
4
2
3
4
5
Dominant Wavelength (nm)
Min.
Max.
581.50
585.00
584.00
587.50
586.50
590.00
589.00
592.50
573.00
577.00
570.00
574.00
567.00
571.00
564.00
568.00
Note:
All categories are established for classification of products. Products
may not be available in all categories. Please contact your Avago
representatives for further clarification/information.
Contrast Enhancement
For information on contrast
enhancement, please see
Application Note 1015.
Soldering/Cleaning
Cleaning agents from the ketone
family (acetone, methyl ethyl
ketone, etc.) and from the
chlorinated hydrocarbon family
(methylene chloride, trichloroethylene, carbon tetrachloride,
etc.) are not recommended for
cleaning LED parts. All of these
various solvents attack or dissolve
the encapsulating epoxies used to
form the package of plastic LED
parts.
For further information on
soldering LEDs, please refer to
Application Note 1027.
For product information and a complete list of distributors, please go to our website:
www.avagotech.com
Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies Limited in the United States and other countries.
Data subject to change. Copyright © 2006 Avago Technologies Limited. All rights reserved. Obsoletes 5988-0382EN
5988-4434EN June 10, 2006
Similar pages