DIODE MODULE DWF(R)100A30/40 DWF （R） 100A is a non-isolated diode module designed for 3 phase rectification. ● IF （AV） ＝100A, VRRM＝400V Construction with Joint-Cathode（F） Type and Joint-Anode （R） type. ● Non-isolated.（Mounting Base as terminals.） ● High Surge Capability ● Easy 20 92 20 20 25 12.5 12 2- 6 （Applications） Welding Power Supply 3 Phase Rectifier DWF 6.5 31max 19.5 4.0 M5X10 80±0.2 DWR Unit：a ■Maximum Ratings Symbol （Tj＝25℃ unless otherwise specified） Ratings Item DWF(R)100A30 DWF(R)100A40 Unit VRRM Repetitive Peak Reverse Voltage 300 400 V VRSM Non-Repetitive Peak Reverse Voltage 360 480 V D.C. Reverse Voltage 240 320 V VR（DC） Symbol Item Conditions Average Forward Current Single phase, half wave, 180︒conduction, Tc：122℃ IF（RMS） R.M.S. Forward Current Single phase, half wave, 180︒conduction, Tc：122℃ IFSM Surge Forward Current 1 ／2cycle, It It Value for one cycle of surge current Tj IF（AV） 2 Tstg Ratings Unit 100 A 160 A 2000 A 16600 A2S Operating Junction Temperature −30 to ＋150 ℃ Storage Temperature −30 to ＋125 ℃ N･m （㎏f･B） 2 Mounting Torque 60Hz, peak value, non-repetitive Mounting（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） Mass 170 g ■Electrical Characteristics Unit 15 mA 1.15 V Item IRRM Repetitive Peak Reverse Current, max. at VDRM, single phase, half wave, Tj＝150℃ VFM Forward Voltage Drop, max. Forward current 300A, Tj＝25℃, Inst. measurement Junction to case 0.25 ℃/W Rth（j-c） Thermal Impedance, max. SanRex Conditions Ratings Symbol ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DWF(R)100A30/40 １２０ Power Dissipation Pav（W） 2 Maximum Forward Characteristics Forward Current I（A） F １０３ Average Forward Current vs. Power Dissipation Single Phase Three Phase １００ ５ ２ １０２ ５ ２ Six Phase ８０ ６０ ４０ ２０ Per one element １５０ １． ５ ０ ２． ０ ４０ ６０ 12０ Cycle Surge Forward Current Rating （Non-Repetitive） ０ ２０ ４０ ６０ Single Phase Three Phase Six Phase １００ ８０ １００ Average Forward Current（A） ０． ２5 １００ Average Forward Current vs. Allowable Case Temperature 20００ Per one element Tj＝25℃ start 60Hz １０００ ０． ３ 8０ Average Forward Current（A） １２５ Transient Thermal Impedance θj-c（℃/W） ２０ Forward Voltage Drop V（V） F Surge Forward Current I（A） F Allowable Case Temperature Tc（℃） １． ０ １２０ ０ １ ２ ５ １０ ２０ ５０ １００ Time（Cycles） Transient Thermal Impedance（max） Per one element Junction to Case 50ms〜20sec ０． ２ ０． １5 0.5ms〜200ms ０． １ ０． 0５ ５ ５ １０-1 ２ １０-３ ２ ５ ５ １００ ２ １０-２ ２ ５ １０１ ２ ５ １０-１ ２ Time t（sec） SanRex ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]