CPC1002N 4-Pin SOP OptoMOS® Relay Parameter Blocking Voltage Load Current Max On-resistance LED Current to operate Rating 60 700 0.55 2 Description Units VP mA Ω mA Features • Designed for use in security systems complying with EN50130-4 • Only 2mA of LED current required to operate • Small 4-Pin SOP Package • TTL/CMOS Compatible input • 100% Solid State • High Reliability • Arc-Free With No Snubbing Circuits • 1500Vrms Input/Output Isolation • No EMI/RFI Generation • Immune to radiated EM fields • SMD Pick & Place, Wave Solderable • Tape & Reel Version Available The CPC1002N is a miniature 1-Form-A DC solid state relay in a 4-Pin SOP package that employs optically coupled MOSFET technology to provide 1500Vrms of input/output isolation. The super-efficient MOSFET switches and photovoltaic die use Clare’s patented OptoMOS architecture. The optically coupled output is controlled by the input's highly efficient GaAlAs infrared LED. The CPC1002N uses Clare’s state of the art double-molded vertical construction packaging to produce one of the world’s smallest relays. The CPC1002N offers board space savings of at least 20% over the competitor’s larger 4-Pin SOP relay. Approvals • UL Recognized Component: File # E76270 • EN/IEC 60950-1 Compliant • CSA Certified Component: Certificate # 1172007 Ordering Information Applications • Security • Passive Infrared Detectors (PIR) • Data Signalling • Sensor Circuitry • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Aerospace • Industrial Controls Part # CPC1002N CPC1002NTR Description 4-Pin SOP (100/tube) 4-Pin SOP (2000/reel) Pin Configuration + Control – Control 1 4 3 2 DC + DC - Switching Characteristics of Normally Open (Form A) Devices Control ILOAD + 90% 10%+ tOFF tON Pb RoHS 2002/95/EC DS-CPC1002N-R03 e3 www.clare.com 1 CPC1002N Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation Total Power Dissipation 1 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 Ratings 60 5 50 1 70 400 1500 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 3.33 mw / ºC Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Current, Continuous 1 Peak Load Current On-Resistance 2 Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics @ 25°C Input Control Current 3 Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics @ 25°C Capacitance Input to Output 1 2 3 2 Conditions Symbol Min Typ Max Units IF=2mA t=10ms IL=100mA VL=60V IL ILPK RON ILEAK - 0.35 - 700 1 0.55 1 mA A Ω VL=50V; f=1MHz tON tOFF COUT - 1.3 0.41 25 5 2 - IL=100mA IF=5mA VR=5V IF IF VF IR 0.3 0.9 - 0.55 1.2 - 2 1.4 10 mA mA V μA - CI/O - 1 - pF IF=3mA, VL=10V μA ms pF Load current derates linearly from 700mA @ 25oC to 420mA @80oC. Measurement taken within 1 second of on time. For applications requiring high temperature operation (greater than 60oC) an LED drive current of 3mA is recommended. www.clare.com R03 CPC1002N PERFORMANCE DATA* CPC1002N Typical LED Forward Voltage Drop (TA=25ºC, IF=5mA) 35 35 20 15 10 25 20 15 10 5 5 0 0 1.19 1.21 1.23 1.25 0.33 0.36 0.37 25 20 15 10 68 0 25 20 15 10 0.75 0.45 15 10 5 0.55 0.60 0.65 0.70 LED Current (mA) 0.43 0.016 800 0.014 700 0.012 600 500 IF=5mA 400 IF=2mA 300 0.002 74 Turn-On (ms) 72 70 68 66 64 62 20 40 60 Temperature (ºC) 80 100 2.50 2.25 2.00 1.75 1.50 1.25 1.00 0.75 0.50 0.25 0 20 40 60 80 100 1.6 CPC1002N Typical Leakage vs. Temperature Measured Across Pins 3 & 4 (VL=60V) -20 0 20 40 60 80 Temperature (ºC) Temperature (ºC) CPC1002N Typical Turn-On vs. Temperature (IL=100mA) CPC1002N Typical Turn-Off vs. Temperature (IL=100mA) IF=3mA -40 0 -40 120 1.5 0.006 0.004 0 1.2 1.3 1.4 Turn-On (ms) 0.008 100 -20 1.1 0.010 200 -40 0.44 76 0 5 900 CPC1002N Typical Blocking Voltage vs. Temperature -20 10 1.0 Turn-Off (ms) 0.40 0.41 0.42 Turn-Off (ms) 15 0.75 0 0 -40 0.50 Leakage (μA) Load Current (mA) 20 74 20 CPC1002N Typical Maximum Load Current vs. Temperature CPC1002N Typical Turn-Off Time (TA=25ºC, IL=100mA, IF=3mA) 70 71 72 73 Blocking Voltage (VP) 0 0 0.55 0.60 0.65 0.70 LED Current (mA) 0.39 69 CPC1002N Typical Turn-On Time (TA=25ºC, IL=100mA, IF=3mA) 25 5 0.38 10 0.38 Device Count (N) Device Count (N) Device Count (N) 0.35 CPC1002N Typical IF for Switch Dropout (TA=25ºC, IL=100mA) 35 5 Device Count (N) 0.34 30 25 15 On-Resistance (Ω) 30 0.50 20 0 0.32 CPC1002N Typical IF for Switch Operation (TA=25ºC, IL=100mA) 0.45 25 5 LED Forward Voltage Drop (V) 35 CPC1002N Typical Blocking Voltage Distribution (TA=25ºC) 30 Device Count (N) 25 1.17 Blocking Voltage (VP) 35 30 Device Count (N) Device Count (N) 30 CPC1002N Typical On-Resistance Distribution (TA=25ºC, IL=100mA) -20 0 20 40 60 Temperature (ºC) 80 100 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 IF=3mA -40 -20 0 20 40 60 80 100 Temperature (ºC) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1002N PERFORMANCE DATA* CPC1002N Typical Turn-On vs. LED Forward Current (IL=100mA) 1.4 Turn-On (ms) IF=50mA IF=20mA IF=10mA 1.5 1.3 1.2 IF=5mA IF=2mA IF=1mA 1.1 1.0 -40 0 20 40 60 Temperature (ºC) 80 CPC1002N Typical On-Resistance vs. Temperature (IL=100mA) On-Resistance (Ω) IF=2mA 0.8 IF=5mA 0.4 0.2 15 20 25 30 35 40 45 0 20 40 60 Temperature (ºC) 1.50 80 0.50 100 0 0.15 0.20 Load Voltage (V) 0.25 0.30 20 25 30 35 40 45 50 CPC1002N Typical IF for Switch Dropout vs. Temperature (IL=100mA) 1.00 0.75 0.50 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 Temperature (ºC) CPC1002N Energy Rating Curve Load Current (A) 200 0.10 -20 Temperature (ºC) 300 15 0.25 -40 100 400 0.05 10 1.25 0.75 CPC1002N Typical Load Current vs. Load Voltage (TA=25ºC, IF=2mA) 0 5 LED Forward Current (mA) 0 0 0.2 50 1.00 500 Load Current (mA) 10 CPC1002N Typical IF for Switch Operation vs. Temperature (IL=100mA) 1.50 0 -20 0.3 0 5 0.25 -40 0.4 0.1 1.25 0.6 0.5 LED Forward Current (mA) 1.0 600 0.6 0 100 0.7 LED Current (mA) 1.2 -20 10 9 8 7 6 5 4 3 2 1 0 CPC1002N Typical Turn-Off vs. LED Forward Current (IL=100mA) Turn-Off (ms) 1.6 LED Current (mA) LED Forward Voltage Drop (V) CPC1002N Typical LED Forward Voltage Drop vs. Temperature 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 10μs 100μs 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 CPC1002N MANUFACTURING INFORMATION Moisture Sensitivity Clare has characterized the moisture reflow sensitivity of this package, and has determined that this component must be handled in accordance with IPC/JEDEC standard J-STD-033 moisture sensitivity level (MSL), level 3 classification. Pb e3 RoHS 2002/95/EC Soldering Reflow Profile For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4-Pin SOP Package Recommended PCB Land Pattern 4.089 ± 0.203 (0.161 ± 0.008) 0.200 ± 0.025 (0.008 ± 0.001) 6.096 ± 0.102 (0.240 ± 0.004) 3.810 ± 0.076 (0.150 ± 0.003) 0.60 (0.0217) 0.432 ± 0.127 (0.017 ± 0.005) 1.02 ± 0.025 (0.040 ± 0.001) Pin 1 2.54 Typ (0.100 Typ) 5.60 (0.2205) 1.30 (0.0512) 2.54 (0.10) 2.184 Max (0.086 Max) 0.0254 - 0.102 (0.001 - 0.004) Dimensions mm (inches) 0.381 TYP. (0.015 TYP.) Tape and Reel Packaging for 4-Pin SOP Package 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=12.00 Max (0.472 Max) Pin 1 B0=4.70 (0.185) K0=2.70 (0.106) K1=2.30 (0.091) P=8.00 (0.315) A0=6.50 (0.256) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 5 Specification: DS-CPC1002N-R03 ©Copyright 2008, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 9/2/08