NTE2076 Integrated Circuit 7–Segment Darlington Transistor Array w/Clamp Diode Description: The NTE2076 is constructed with a 7–circuit Darlington Transistor Array by a NPN Transistor and is a semi–conductor integrated circuit (IC) which can drive large electric current with very small input current. Features: D High Electric Voltage Endurance (BVCEO ≥ 40V) D Large Electric Current Drive (IC (max) = 150mA) D Convenient for Practical Attachment D Available to Drive with PMOS IC Output D Clamp Diode Attached D Wide Input Voltage Range (–40V to +40V) D Wide Operating Temperature Range (TA = –20° to +75°C) Applications: Attachment relay or printer drive, digit drive of LED and lamps indicator device, interface of MOS bipolar–logic IC, etc. Absolute Maximum Ratings: (TA = –20° to +75°C unless otherwise specified) Voltage Between Collector and Emitter when Output is “High”, VCEO . . . . . . . . . . . . . . –0.5 to +40V Collector Current when Output is “Low”, each Current for a Circuit, IC . . . . . . . . . . . . . . . . . . 150mA Input Voltage, Vi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –40 to +40V Clamp Diode Positive–Direction Current, Ir . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150mA Clamp Diode Negative–Direction Voltage, Va . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40V Power Consumption (TA = +25°C), Pd . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.47W Operating Ambient Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –20° to +75°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –55° to +125°C Electrical Characteristics: (TA = –20° to +75°C unless otherwise specified) Parameter Symbol Output Voltage VO Collector Current IC Test Conditions Min Typ Max Unit 0 – 40 V Duty Cycle 40% or less (each current for a circuit) 0 – 150 mA “High” Input Voltage V“H” IC = 150mA 7 – 35 V “Low” Input Voltage V“L” IO(Leak) = 50µA 0 – 1 V Pin Connection Diagram Input 1 1 16 Output 1 Input 2 2 Input 3 3 15 Output 2 14 Output 3 Input 4 4 13 Output 4 Input 5 5 12 Output 5 Input 6 6 11 Output 6 Input 7 7 10 Output 7 GND 8 9 Common 16 9 1 8 .870 (22.0) Max .260 (6.6) Max .200 (5.08) Max .100 (2.54) .700 (17.78) .099 (2.5) Min