Analog Power AMIFB7540 N-Channel 60-V (D-S) MOSFET Key Features: • Low rDS(on) trench technology • Low thermal impedance • Fast switching speed VDS (V) 60 Typical Applications: • Automotive Systems • DC/DC Conversion Circuits • Battery Powered Power Tools PRODUCT SUMMARY rDS(on) (mΩ) 5.1 @ VGS = 10V 7.5 @ VGS = 6.5V 110a DRAIN connected to TAB ABSOLUTE MAXIMUM RATINGS (TA = 25°C UNLESS OTHERWISE NOTED) Parameter Symbol Limit VDS Drain-Source Voltage 60 VGS Gate-Source Voltage ±20 TC=25°C ID 110 Continuous Drain Current a IDM Pulsed Drain Current b 430 a TC=25°C IS 110 Continuous Source Current (Diode Conduction) a T =25°C P 300 Power Dissipation C D TJ, Tstg -55 to 175 Operating Junction and Storage Temperature Range THERMAL RESISTANCE RATINGS Parameter Maximum Junction-to-Ambient Maximum Junction-to-Case ID (A) c Symbol Maximum RθJA 62.5 RθJC 0.5 Units V A A W °C Units °C/W Notes a. Package Limited b. Pulse width limited by maximum junction temperature c. Surface Mounted on 1” x 1” FR4 Board. © Preliminary 1 Publication Order Number: DS_AMIFB7540_1B Analog Power AMIFB7540 Electrical Characteristics Parameter Symbol Gate-Source Threshold Voltage Gate-Body Leakage VGS(th) IGSS Zero Gate Voltage Drain Current IDSS On-State Drain Current a ID(on) Drain-Source On-Resistance a rDS(on) Forward Transconductance a Diode Forward Voltage a gfs VSD Test Conditions Static VDS = VGS, ID = 250 uA VDS = 0 V, VGS = ±20 V VDS = 48 V, VGS = 0 V VDS = 48 V, VGS = 0 V, TJ = 55°C VDS = 5 V, VGS = 10 V VGS = 10 V, ID = 30 A VGS = 6.5 V, ID = 25 A VDS = 15 V, ID = 30 A IS = 30 A, VGS = 0 V Min Typ Max 1 ±100 1 10 110 Unit V nA uA A 5.1 7.5 86 0.83 mΩ S V Dynamic b Total Gate Charge Gate-Source Charge Gate-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss VDS = 30 V, VGS = 6.5 V, ID = 20 A VDS = 30 V, RL = 1.5 Ω, ID = 20 A, VGEN = 10 V, RGEN = 6 Ω VDS = 15 V, VGS = 0 V, f = 1 Mhz 50 22 12 35 25 68 29 4976 498 397 nC ns pF Notes a. Pulse test: PW <= 300us duty cycle <= 2%. b. Guaranteed by design, not subject to production testing. Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. © Preliminary 2 Publication Order Number: DS_AMIFB7540_1B Analog Power AMIFB7540 Typical Electrical Characteristics 0.02 30 0.015 ID - Drain Current (A) RDS(on) - On-Resistance(Ω) TJ = 25°C 5.5V 0.01 6V 0.005 20 10 8V,10V 0 0 0 10 20 0 30 ID-Drain Current (A) 4 6 8 VGS - Gate-to-Source Voltage (V) 1. On-Resistance vs. Drain Current 2. Transfer Characteristics 0.05 100 TJ = 25°C ID = 20A TJ = 25°C 0.04 IS - Source Current (A) RDS(on) - On-Resistance(Ω) 2 0.03 0.02 0.01 0 10 1 0.1 0.01 0 2 4 6 8 10 0.2 0.4 0.6 0.8 1 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) 3. On-Resistance vs. Gate-to-Source Voltage 4. Drain-to-Source Forward Voltage 30 7000 F = 1MHz 6000 6V Capacitance (pf) ID - Drain Current (A) 10V,8V 20 5.5V 10 Ciss 5000 4000 3000 2000 Coss 1000 0 Crss 0 0 0.05 0.1 0.15 0.2 0.25 0.3 0 10 15 20 VDS-Drain-to-Source Voltage (V) VDS - Drain-to-Source Voltage (V) 5. Output Characteristics © Preliminary 5 6. Capacitance 3 Publication Order Number: DS_AMIFB7540_1B Analog Power AMIFB7540 Typical Electrical Characteristics 2 VDS = 30V ID = 20A RDS(on) - On-Resistance(Ω) (Normalized) VGS-Gate-to-Source Voltage (V) 10 8 6 4 2 0 1.5 1 0.5 0 20 40 60 80 -50 -25 Qg - Total Gate Charge (nC) 25 50 75 100 125 150 TJ -JunctionTemperature(°C) 7. Gate Charge 8. Normalized On-Resistance Vs Junction Temperature 1000 PEAK TRANSIENT POWER (W) 400 10 uS 100 100 uS 1 mS ID Current (A) 0 10 mS 10 100 mS 1 SEC 1 10 SEC 100 SEC DC 1 0.1 Idm limit Limited by RDS 350 300 250 200 150 100 50 0.01 0.1 1 10 100 0 0.001 1000 0.01 0.1 1 10 100 1000 VDS Drain to Source Voltage (V) t1 TIME (SEC) 9. Safe Operating Area 10. Single Pulse Maximum Power Dissipation 1 D = 0.5 RθJA(t) = r(t) + RθJA 0.2 0.1 RθJA = 62.5 °C /W 0.1 0.05 P(pk) 0.02 t1 t2 0.01 Single Pulse 0.001 0.0001 0.001 TJ - TA = P * RθJA(t) Duty Cycle, D = t1 / t2 0.01 0.1 1 10 100 1000 t1 TIME (sec) 11. Normalized Thermal Transient Junction to Ambient © Preliminary 4 Publication Order Number: DS_AMIFB7540_1B Analog Power AMIFB7540 Package Information DIM. A A1 A2 B b b2 c D D1 D2 E E1 e L ØP Q Option 1 Option 2 MILLIMETERS MIN MAX 4.24 4.72 1.11 1.41 2.22 2.7 2.6 3.9 0.66 0.94 1.17 1.45 0.4 0.6 14.5 15.74 8.4 9.65 12.08 12.48 9.7 10.54 8 8.4 2.49 2.59 12.27 14.5 3.55 3.89 2.58 2.98 Option 3 Analog Power (APL) reserves the right to make changes without further notice to any products herein. APL makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does APL assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in APL data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. APL does not convey any license under its patent rights nor the rights of others. APL products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the APL product could create a situation where personal injury or death may occur. Should Buyer purchase or use APL products for any such unintended or unauthorized application, Buyer shall indemnify and hold APL and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that APL was negligent regarding the design or manufacture of the part. APL is an Equal Opportunity/Affirmative Action Employer. © Preliminary 5 Publication Order Number: DS_AMIFB7540_1B