ETC2 MI1023T Thermoelectric cooler Datasheet

marlow industries inc.®
Thermoelectric Cooler
MI1023T
Performance Values
Hot Side Temperature (°C)
27°C
50°C
∆ Tmax (°C-dry N2):
64
73
Qmax (watts):
9.2
10.5
Imax (amps):
1.8
1.8
Vmax (vdc):
8.0
9.0
AC Resistance (ohms):
3.86
---
Mechanical Characteristics
Positive Lead
Leads: 28 AWG (0.32) Bus
Solid Tinned Copper
.518
[13.16]
Negative Lead
2.00 +/-.25
[50.80+/-6.35]
.518
[13.16]
.085+/-.005
[2.16 +/-0.13]
.005 [0.13]
Cold Side
A
.001 [0.03]
.001 [0.03]
Ceramic Material: Alumina (AC)
Millimeters are in [ ]
Ordering Options
A
•
MI1023T-01
both surfaces are metallized
•
MI1023T-02
hot side exterior is metallized
•
MI1023T-03
no metallization
•
For example, and MI1023T with only the hot side
metallized is specified as an MI1023T-02AC
Pretinned metallized ceramic surface(s) with
117°C solder.
Thermistor mounted on edge of cold side ceramic.
(Calibration available.)
Elevated temperature burn-in with test data provided.
102-0008, Rev C
Thermoelectric Cooler
MI1023T
Performance Curves
Environment: One atmosphere dry nitrogen
Hot Side Temperature: 27°C
HEAT
LOAD
(WATTS)
T (C)
60.0
40.0
20.0
0.0
8.0
6.0
4.0
Q=0
T=0
2.0
0.0
0.0
0.4
0.8
1.2
1.6
CURRENT (AMPS)
2.0
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
10.00
60.0
T (C)
0.00
1.00
2.00
3.00
4.00
5.00
6.00
7.00
8.00
9.00
HEAT
LOAD
(WATTS)
80.0
40.0
20.0
0.0
VOLTAGE (VDC)
80.0
VOLTAGE (VDC)
Hot Side Temperature: 50°C
8.0
6.0
4.0
Q=0
T=0
2.0
0.0
0.0
0.4
0.8
1.2
1.6
CURRENT (AMPS)
2.0
For performance information in a vacuum or with hot side temperatures other than 27°C or 50°C, consult one of our
Applications Engineers.
Installation
Recommended mounting methods: Bonding with thermal epoxy or soldering with metallized ceramics. For additional
information, please refer to our TEC Installation Guide.
Operation Cautions
For maximum reliability, storage and operation below 85°C in a non-condensing environment is recommended. To
minimize thermal stress, use linear/proportional temperature control or a similar method rather than an ON/OFF method.
Marlow Industries, Inc.
10451 Vista Park Road
Dallas Texas 75238-1645
TEL: 214-340-4900
FAX: 214-341-5212
Internet: http://www.marlow.com
Marlow Industries Europe
Aberdeen House, South Road
Haywards Heath
West Sussex RH164NG UK
TEL: +44 (0)1444-443404
FAX: +44 (0)1444-443334
Marlow Industries Asia
1-1-8-401
Uehara, Shibuya-ku
Tokyo, Japan 151-0064
TEL: +81 (3) 5454-5280
FAX: +81 (3) 5454-5281
Copyright 2000, Marlow Industries, Inc. Marlow Industries reserves the right to change the design and specifications of products without notice. 102-0008, Rev C
Similar pages