^ϳϬt THRU ^ϳϬtͲϬϲ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ PRIMARY CHARACTERISTICS SO7-323 PD 200m: VRRM 70V IF 70mA VF#,F P$ 410mV TJ Max 125℃ PACKAGE BAS70W Marking: K73 BAS70W-04 Marking: K74 BAS70W-05 Marking: K75 BAS70W-06 Marking: K76 FEATURES MECHANICAL DATA Low Turn-on voltage Case：Molded plastic,SOT-23 Fast Switching Polarity：Shown above Also available in lead free version Terminals :Plated terminals, Moisture Sensitivity Level 1 solderable per MIL-STD-750,Method 2026 Epoxy : UL94-V0 rated flame retardant MAXIMUM RATINGS @TA=25℃ Symbol Parameter Value Units VR DC Voltage 70 V IF Forward Continuous Current 70 mA PD Power dissipation 200 mW TJ Operating Temperature -55~125 ℃ Tstg Storage Temperature -55-150 ℃ ELECTRICAL CHARACTERISTICS (Tamb=25℃ unless otherwise specified) Parameter Reverse breakdown voltage Reverse voltage Forward Diode Test V(BR) R IR= 10µA conditions VR 50V IR leakage current= voltage capacitance Reveres recovery time 2014.12 Symbol VF IF=1mA IF=15mA = = VR 0V,f 1MHz C D trr IF=IR=10mA,Irr=0.1xIR, RL=100Ω www.willas.com.tw MIN MAX 70 UNIT V 100 nA 410 1000 mV 2 pF 5 nS Rev.J03 ^ϳϬt THRU ^ϳϬtͲϬϲ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ Typical Characteristics Forward Characteristics 70 Reverse Characteristics 100 Pulsed Pulsed (uA) T= a 2 5℃ REVERSE CURRENT IR T= a 1 00 ℃ (mA) IF FORWARD CURRENT Ta=100℃ 10 10 1 0.1 0.01 0.0 0.2 0.4 0.6 FORWARD VOLTAGE 0.8 VF 0.1 Ta=25℃ 0.01 1E-3 1.0 0 10 20 (V) 30 40 REVERSE VOLTAGE Capacitance Characteristics Per Diode 2.4 1 50 VR 60 70 (V) Power Derating Curve 250 Ta=25℃ f=1MHz (mW) 1.2 0.8 0.4 0.0 0 4 8 12 REVERSE VOLTAGE 2014.12 200 PD 1.6 POWER DISSIPATION CAPACITANCE BETWEEN TERMINALS CT (pF) 2.0 16 VR 20 150 100 50 0 0 (V) 25 50 75 100 125 AMBIENT TEMPERATURE Ta (℃) www.willas.com.tw Rev.J03 ^ϳϬt THRU ^ϳϬtͲϬϲ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ Outline Drawing .004(0.10)MIN. SOT-323 .096(2.45) .078(2.00) .054(1.35) .045(1.15) .087(2.20) .070(1.80) .010(0.25) .003(0.08) .056(1.40) .047(1.20) .016(0.40) .008(0.20) .043(1.10) .032(0.80) .004(0.10)MAX. Dimensions in inches and (millimeters) Rev.D 2014.12 www.willas.com.tw Rev.J03 ^ϳϬt THRU ^ϳϬtͲϬϲ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ SOT-323 Suggested Soldering Pad Layout .35(0.90) .039(1.00) .023(0.60) Dimensions in inches and (millimeters) 2014.12 www.willas.com.tw RevA Rev.J03 WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ 2014.12 www.willas.com.tw ^ϳϬt THRU ^ϳϬtͲϬϲ Rev.J03 ^ϳϬt THRU ^ϳϬtͲϬϲ WůĂƐƚŝĐͲŶĐĂƉƐƵůĂƚĞ^ĐŚŽƚƚŬLJĂƌƌŝĞƌŝŽĚĞƐ Ordering Information: Device PN Part Number ‐T(1)G(2)‐WS Packing Tape&Reel: 3 Kpcs/Reel Note: (1) Packing code, Tape & Reel Packing (2) RoHS product for packing code suffix ”G”；Halogen free product for packing code suffix “H” ***Disclaimer*** WILLAS reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. WILLAS or anyone on its behalf assumes no responsibility or liability for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" parameters which may be included on WILLAS data sheets and/ or specifications can and do vary in different applications and actual performance may vary over time. WILLAS does not assume any liability arising out of the application or use of any product or circuit. WILLAS products are not designed, intended or authorized for use in medical, life‐saving implant or other applications intended for life‐sustaining or other related applications where a failure or malfunction of component or circuitry may directly or indirectly cause injury or threaten a life without expressed written approval of WILLAS. Customers using or selling WILLAS components for use in such applications do so at their own risk and shall agree to fully indemnify WILLAS Inc and its subsidiaries harmless against all claims, damages and expenditures. 2014.12 www.willas.com.tw Rev.J03