MASW-011040 Switch, SP4T 200 W 0.05 - 1.0 GHz Rev. V1 Features Functional Schematic 200 W CW Incident Power @ +85°C Low Insertion Loss: <0.5 dB High Isolation: >40 dB Harmonics: <-70 dBc Operates from +V DC Bias Only Lead-Free 9 mm HQFN 20-lead Package Halogen-Free “Green” Mold Compound RoHS* Compliant and 260°C Reflow Compatible Description The MASW-011040 is a high power PIN diode SP4T switch in a common anode configuration, operating from 50 MHz to 1 GHz. It features low insertion loss and excellent linearity. It includes two high-power ports capable of handling up to 200 Watts CW and two low-power ports capable of handling up to 100 Watts CW of incident power at a base plate temperature of +85ºC. This high power switch is ideal for use on land mobile radio and MIL-COM applications that require higher CW and pulsed power operation. This device can operate with positive-only DC supplies, making it suitable for switch-filter and power amplifier control circuits. The MASW-011040 is manufactured using MACOM’s hybrid manufacturing process featuring high voltage PIN diodes and passive devices integrated in a 9 mm HQFN 20-lead plastic package. The MASW-011040 is compatible with MACOM’s MADR-010574 PIN Diode Driver. 1 Ordering Information GND N/C RFC N/C GND 20 19 18 17 16 N/C 1 15 N/C RF1 2 14 RF4 N/C 3 13 N/C B1 4 12 B4 GND 5 11 GND 6 B2 7 8 RF2 N/C 9 10 RF3 B3 Pin Configuration Pin Function Pin Function 1 No Connection 11 Ground 22 RF1 Input / V1 Bias 12 B4 Bias 3 No Connection 13 No Connection 4 B1 Bias 142 RF4 Input / V4 Bias 5 Ground 15 No Connection 6 B2 Bias 16 Ground 72 RF2 Input / V2 Bias 17 No Connection 8 No Connection 18 RF Common / V5 Bias Part Number Package 92 RF3 Input / V3 Bias 19 No Connection MASW-011040-TR0500 500 pc reel 10 B3 Bias 20 Ground MASW-011040-001SMB Sample Test Board Paddle3 Ground 1. Reference Application Note M513 for reel size information. *Restrictions on Hazardous Substances, European Union Directive 2011/65/EU. 2. RF1 and RF4 are high power ports (200 W); RF2 and RF3 are low power ports (100 W). 3. The exposed paddle centered on the package bottom must be connected to RF, DC and thermal ground. 1 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-011040 Switch, SP4T 200 W 0.05 - 1.0 GHz Rev. V1 Electrical Specifications: TA = 25°C, PIN = 0 dBm (unless otherwise defined), Z0 = 50 Ω Bias4 = 5 V / 400 mA, 3 V / 200 mA, 100 V / 25 mA Parameter Test Conditions Units Min. Typ. Max. Insertion Loss RFC - RF1 & RFC - RF4 0.5 GHz 1.0 GHz dB — 0.30 0.45 — 0.60 Insertion Loss RFC - RF2 & RFC - RF3 0.5 GHz 1.0 GHz dB — 0.25 0.40 — 0.55 Isolation RFC - RF1 & RFC - RF4 0.5 GHz 1.0 GHz dB — 40 51 45 — Isolation RFC - RF2 & RFC - RF3 0.5 GHz 1.0 GHz dB — 51 45 — Input Return Loss RFC - RF1 & RFC - RF4 PIN = 0 dBm dB — >13 — Input Return Loss RFC - RF2 & RFC - RF3 PIN = 0 dBm dB — >20 — dBm / W — 53 / 200 52 / 158 — dBm / W — 50 / 100 49 / 80 — dBm — 54 53 — dBm — 51 50 — CW Input Power RFC - RF1 & RFC - RF4 CW Input Power RFC - RF2 & RFC - RF3 P0.1dB RFC - RF1 & RFC - RF4 P0.1dB RFC - RF2 & RFC - RF3 85°C base plate, 550 MHz 950 MHz 85°C base plate, 550 MHz 950 MHz 85°C base plate, 550 MHz 950 MHz 85°C base plate, 550 MHz 950 MHz 2nd Harmonics PIN = 49 dBm, F = 950 MHz dBc — -75 — 3rd Harmonics PIN = 49 dBm, F = 950 MHz dBc — -85 — TON, TOFF (50% CTL - 90% RF and 10% RF) 1 MHz Rep Rate in Modulating Mode µs — 3.5 — TRISE, TFALL (10-90% RF Voltage) 1 MHz Rep Rate in Modulating Mode µs — 0.8 — 4. See Bias table. 2 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-011040 Switch, SP4T 200 W 0.05 - 1.0 GHz Rev. V1 Bias Table5 RF State V1 Bias (V) V2 Bias (V) V3 Bias (V) V4 Bias (V) V5 Bias (V) B1 Bias (V) B2 Bias (V) B3 Bias (V) B4 Bias (V) RFC - RF1 Low Loss RFC - RF2 Isolation RFC - RF3 Isolation RFC - RF4 Isolation 0V@ 400 mA 100 V @ 100 V @ 100 V @ 25 mA 25 mA 25 mA 5V@ 400 mA 100 V @ 0 mA 0V@ 25 mA 0V@ 25 mA 0V@ 25 mA RFC - RF2 Low Loss RFC - RF1 Isolation RFC - RF3 Isolation RFC - RF4 Isolation 100 V @ 25 mA 0V@ 100 V @ 100 V @ 200 mA 25 mA 25 mA 3V@ 200 mA 0V@ 25 mA 100 V @ 0 mA 0V@ 25 mA 0V@ 25 mA RFC - RF3 Low Loss RFC - RF1 Isolation RFC - RF2 Isolation RFC - RF4 Isolation 100 V @ 100 V @ 25 mA 25 mA 0V@ 200 mA 100 V @ 25 mA 3V@ 200 mA 0V@ 25 mA 0V@ 25 mA 100 V @ 0 mA 0V@ 25 mA RFC - RF4 Low Loss RFC - RF1 Isolation RFC - RF2 Isolation RFC - RF3 Isolation 100 V @ 100 V @ 100 V @ 25 mA 25 mA 25 mA 0V@ 400 mA 5V@ 400 mA 0V@ 25 mA 0V@ 25 mA 0V@ 25 mA 100 V @ 0 mA 5. DC reverse bias of a PIN diode operating at a high power is dependent on RF frequency, incident power, and VSWR. See Minimum Reverse DC Voltage table for high power operation. Absolute Maximum Ratings6,7 Minimum Reverse DC Voltage8 Parameter Absolute Maximum Frequency (MHz) Minimum Reverse DC Voltage Forward Current +400 mA 50 | -142 V | Reverse DC Voltage | -150 V | 100 | -102 V | Operating Temperature -55°C to +85°C 200 | -60 V | Storage Temperature -65°C to +150°C 500 | -26 V | Junction Temperature +175°C 1000 | -13 V | 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. MACOM does not recommend sustained operation near these survivability limits. 8. Required to maintain low loss under 200 W of incident power with 1.5:1 VSWR. 3 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-011040 Switch, SP4T 200 W 0.05 - 1.0 GHz Rev. V1 Typical Performance Curves: Insertion Loss Return Loss 0.0 0 -5 -0.1 -10 -15 (dB) (dB) -0.2 RFC - RF1 RFC - RF4 RFC - RF2 RFC - RF3 -0.3 -20 -25 -0.4 RFC - RF1 RFC - RF4 RFC - RF2 RFC - RF3 -0.5 -0.6 0.0 0.2 -30 -35 0.4 0.6 0.8 -40 0.0 1.0 0.2 Frequency (GHz) Isolation RFC - RF1 0.8 1.0 0.8 1.0 0.8 1.0 0 -10 -10 RFC - RF1 Iso, RF2 IL RFC - RF1 Iso, RF3 IL -20 -30 -40 -40 -50 -60 -60 0.2 0.4 0.6 0.8 -70 0.0 1.0 RFC - RF1 Iso, RF4 IL -30 -50 -70 0.0 RFC - RF2 Iso, RF1 IL RFC - RF2 Iso, RF3 IL -20 RFC - RF1 Iso, RF4 IL (dB) (dB) 0.6 Isolation RFC - RF2 0 0.2 Frequency (GHz) 0.4 0.6 Frequency (GHz) Isolation RFC - RF4 Isolation RFC - RF3 0 0 -10 -10 RFC - RF3 Iso, RF1 IL RFC - RF3 Iso, RF2 IL -20 -30 -40 -40 -50 -60 -60 0.2 0.4 0.6 Frequency (GHz) 0.8 1.0 RFC - RF4 Iso, RF3 IL -30 -50 -70 0.0 RFC - RF4 Iso, RF1 IL RFC - RF4 Iso, RF2 IL -20 RFC - RF3 Iso, RF4 IL (dB) (dB) 0.4 Frequency (GHz) -70 0.0 0.2 0.4 0.6 Frequency (GHz) 4 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support MASW-011040 Switch, SP4T 200 W 0.05 - 1.0 GHz Rev. V1 Application Schematic Off-Chip Component Values RFC C10 C9 L5 R5 V5 V1 L1 GND N/C RFC GND N/C N/C V4 C1 RF1 RF1 C8 N/C L4 RF4 RF4 C2 Component Value C1,C3,C6,C8,C9 1000 pF C2,C4,C5,C7,C10 270 pF L1 - L5 680 nH R1 - R4 4.4 kΩ R59 10 Ω C7 N/C N/C R1 R4 N/C B4 R2 Handling Procedures R3 B2 B3 V2 C3 L2 C4 RF2 9. Must be rated for appropriate power handling. B3 RF3 N/C N/C B4 RF2 B1 B2 B1 L3 C5 V3 C6 RF3 Please observe the following precautions to avoid damage: Static Sensitivity These electronic devices are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these Class 1B HBM devices. Lead Free 9 mm HQFN 20-Lead† All dimensions shown as inches/mm. † Reference Application Note S2083 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 3 requirements. Plating is NiPdAuAg. 5 M/A-COM Technology Solutions Inc. (MACOM) and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. Visit www.macom.com for additional data sheets and product information. For further information and support please visit: https://www.macom.com/support