L P V- 3 5 35W Single Output Switching Power Supply series Features : Constant voltage design Universal AC input / Full range Withstand 300VAC surge input for 5 seconds Protections: Short circuit / Overload / Over voltage Cooling by free air convection Fully encapsulated with IP67 level (Note.9) Fully isolated plastic case Class power unit, no FG Pass LPS Suitable for LED lighting and moving sign applications (Note.8) 100% full load burn-in test Low cost, high reliability 2 years warranty LPS IP67 SPECIFICATION MODEL OUTPUT LPV-35-5 LPV-35-12 LPV-35-15 LPV-35-24 DC VOLTAGE 5V 12V 15V 24V 36V RATED CURRENT 5A 3A 2.4A 1.5A 1A CURRENT RANGE 0 ~ 6A (Note.7) 0 ~ 3A 0 ~ 2.4A 0 ~ 1.5A 0 ~ 1A RATED POWER 30W 36W 36W 36W 36W 120mVp-p 120mVp-p 150mVp-p 150mVp-p 85% 85% RIPPLE & NOISE (max.) Note.2 80mVp-p VOLTAGE TOLERANCE Note.3 6.0% LINE REGULATION 1.0% SETUP, RISE TIME INPUT 50ms/230VAC Note.4 90 ~ 264VAC 47 ~ 63Hz 77% AC CURRENT (Typ.) INRUSH CURRENT(max.) 1.1A/115VAC 0.7A/230VAC COLD START 30A/115VAC LEAKAGE CURRENT 0.25mA / 240VAC OVER VOLTAGE WORKING TEMP. WORKING HUMIDITY ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT OTHERS 84% 84% 60A/230VAC 110 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.75 ~ 6.75V 13.8 ~ 16.2V 17.25 ~ 20.25V 27.6 ~ 32.4V 41.4 ~ 48.6V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +75 (Refer to "Derating Curve") 20 ~ 90% RH non-condensing -40 ~ +80 , 10 ~ 95% RH VIBRATION 0.03%/ (0 ~ 50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes SAFETY STANDARDS UL1310 Class 2, CAN/CSA C22.2 No. 223-M91, IP67 approved ; design refer to TUV EN60950-1, EN61347-2-13 WITHSTAND VOLTAGE I/P-O/P:3KVAC ISOLATION RESISTANCE I/P-O/P:>100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 (CISPR22) Class B, EN61000-3-2 Class A, EN61000-3-3 EMC EMISSION EMC IMMUNITY Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A MTBF 743.5Khrs min. DIMENSION 148*40*30mm (L*W*H) 0.34Kg; 40pcs/14.6Kg/0.63CUFT PACKING NOTE 16ms/115VAC at full load 127 ~ 370VDC EFFICIENCY (Typ.) PROTECTION EMC 500ms, 20ms / 115VAC at full load FREQUENCY RANGE OVERLOAD SAFETY & 2.0% Note.6 500ms, 20ms / 230VAC HOLD UP TIME (Typ.) VOLTAGE RANGE 5.0% 4.0% LOAD REGULATION LPV-35-36 MIL-HDBK-217F (25 ) 1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltage. Please check the static characteristics for more details. 5. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 6. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. 7. LPV-35-5 can provide 6A of output current continuously. Based on the requirement of UL1310 class 2, the output current is only certified up to 5A for the test report of LPV-35-5. 8. In the European market this power supply can be used for LED lighting applications with input power up to 25W. 9. Suitable for indoor use or outdoor use without direct sunlight exposure. Please avoid immerse in the water over 30 minute. File Name:LPV-35-SPEC 2011-09-06 L P V- 3 5 35W Single Output Switching Power Supply Mechanical Specification Case No.975A 600 30 148 series Unit:mm 600 30 UL1015 18AWG 40 3.6 T case 3.6 26.5 UL1007 16AWG +V(Red) -V(Black) 18 3.5 AC/N(Blue) AC/L(Brown) 3.5 3.5 3.5 30 T case: Max. Case Temperature. Recommend Mounting Direction Block Diagram fosc : 65KHz EMI FILTER & RECTIFIERS I/P RECTIFIERS & FILTER POWER SWITCHING O.L.P. +V -V DETECTION CIRCUIT PWM CONTROL O.V.P. Derating Curve Static Characteristics 100 100 Others 90 80 80 5V 70 LOAD (%) LOAD (%) 60 40 20 -30 0 15 30 40 50 60 AMBIENT TEMPERATURE ( ) 70 75 80 (HORIZONTAL) 60 50 40 90 100 125 135 145 155 165 175 180 200 230 264 INPUT VOLTAGE (V) 60Hz File Name:LPV-35-SPEC 2011-09-06