ES3A - ES3J Fast Rectifiers Features • For surface mount applications. • Glass passivated junction. • Low profile package. • Easy pick and place. • Built-in strain relief. • Superfast recovery times for high efficiency. SMB(DO-214AC) Color Band Denotes Cathode Absolute Maximum Ratings * Symbol Ta = 25°C unless otherwise noted Value Parameter ES3A ES3B ES3C ES3D ES3J 50 100 150 200 600 Units VRRM Maximum Repetitive Reverse Voltage IF(AV) Average Rectified Forward Current, .375” lead length @ TA=75°C 3.0 A IFSM Non-repetitive Peak Forward Surge Current 8.3 ms Single Half-Sine-Wave 100 A -50 to +150 °C 1.66 W Value Units TJ, TSTG PD Operating Junction and Storage Temperature Range Power Dissipation V * These ratings are limiting values above which the serviceability of any semiconductor device may by impaired. Thermal Characteristics Symbol Parameter RθJA Thermal Resistance, Junction to Ambient * 47 °C/W RθJL Thermal Resistance, Junction to Lead * 12 °C/W * Device mounted on FR-4 PCB 0.013 mm. Electrical Characteristics Symbol TC = 25°C unless otherwise noted Parameter VF Forward Voltage Trr Reverse Recovery Time IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A IR CT Value @ IF = 3.0 A Reverse Current @ rated VR TA = 25°C TA = 100°C Total Capacitance VR = 4.0 V, f = 1.0 MHz ©2006 Fairchild Semiconductor Corporation ES3A - ES3J Rev. F 1 Units 0.95 1.7 V 20 35 ns 10 500 uA 45 pF www.fairchildsemi.com ES3A - ES3J Fast Rectifiers December 2006 ES3A - ES3J Fast Rectifiers Typical Performance Characteristics Forward Current, IF[A] 100 ES3A-ES3D 10 ES3J 1 0.1 o TA=25 C Pulse Width = 300us 2% Duty Cycle 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 Forward Voltage Drop, VF[V] Figure 1. Foward Current Deration Curve Figure 2. Foward Voltage Characteristics Figure 3. Total Capacitance Figure 4. Reverse Current vs Reverse Voltage 50Ω NONINDUCTIVE 50Ω NONINDUCTIVE +0.5A trr (-) DUT 50V (approx) 50Ω NONINDUCTIVE 0 Pulse Generator (Note 2) -0.25A (+) OSCILLOSCOPE (Note 1) -1.0A 1.0cm NOTES: 1. Rise time = 7.0 ns max; Input impedance = 1.0 megaohm 22 pf. 2. Rise time = 10 ns max; Source impedance = 50 ohms. 2 ES3A - ES3J Rev. F SET TIME BASE FOR 5/ 10 ns/ cm www.fairchildsemi.com ES3A - ES3J Fast Rectifiers Package Dimensions SMC / DO - 214AB 0LQLPXP5HFRPPHQGHG /DQG3DWWHUQ Dimensions in Inches(Millimeters) 3 ES3A - ES3J Rev. F www.fairchildsemi.com The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx™ ActiveArray™ Bottomless™ Build it Now™ CoolFET™ CROSSVOLT™ DOME™ EcoSPARK™ E2CMOS™ EnSigna™ FACT® FAST® FASTr™ FPS™ FRFET™ FACT Quiet Series™ GlobalOptoisolator™ GTO™ HiSeC™ I2C™ i-Lo™ ImpliedDisconnect™ IntelliMAX™ ISOPLANAR™ LittleFET™ MICROCOUPLER™ MicroFET™ MicroPak™ MICROWIRE™ MSX™ MSXPro™ Across the board. Around the world.™ The Power Franchise® Programmable Active Droop™ OCX™ OCXPro™ OPTOLOGIC® OPTOPLANAR™ PACMAN™ POP™ Power247™ PowerEdge™ PowerSaver™ PowerTrench® QFET® QS™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ RapidConnect™ µSerDes™ ScalarPump™ SILENT SWITCHER® SMART START™ SPM™ Stealth™ SuperFET™ SuperSOT™-3 SuperSOT™-6 SuperSOT™-8 SyncFET™ TCM™ TinyBoost™ TinyBuck™ TinyPWM™ TinyPower™ TinyLogic® TINYOPTO™ TruTranslation™ UHC® UniFET™ VCX™ Wire™ DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN;NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. Rev. I22 4 ES3A - ES3J Rev. F www.fairchildsemi.com ES3A - ES3J Fast Rectifiers FAIRCHILD SEMICONDUCTOR TRADEMARKS