LUXEON Rebel Automotive Specification Optimized solutions for automotive applications Technical Datasheet DS58 LUXEON® Rebel Automotive Specification Introduction Automotive Specification LUXEON® Rebel LEDs are specifically designed and tested to meet and exceed expectations for reliability, performance and lifetime in all vehicle applications. Philips Lumileds automotive color binning structure meets both SAE and ECE color specifications and provides finer granularity than existing systems. PPAP documentation is available upon request. Automotive Specification LUXEON Rebel LEDs are superior LED products for: • Daytime Running Lights (DRL) • Turn Lamps • Stop/Tail Lamps • Position Lamps • Backup Lamps • Side Marker Lamps • Rear Fog Lamps • Interior Lamps. Hg Table of Contents Product Nomenclature................................................................................................................................................. 3 Average Lumen Maintenance Characteristics......................................................................................................... 3 Environmental Compliance.......................................................................................................................................... 3 Flux Characteristics....................................................................................................................................................... 4 Optical Characteristics................................................................................................................................................. 5 Electrical Characteristics.............................................................................................................................................. 6 Absolute Maximum Ratings.................................................................................................................................... 8 Absolute Minimum Ratings..................................................................................................................................... 8 JEDEC Moisture Sensitivity.................................................................................................................................... 9 Reflow Soldering Characteristics............................................................................................................................. 10 Mechanical Dimensions.............................................................................................................................................. 11 Pad Configuration ................................................................................................................................................. 12 Solder Pad Design................................................................................................................................................... 12 Wavelength Characteristics....................................................................................................................................... 13 Typical Light Output Characteristics over Temperature..................................................................................... 15 Typical Forward Current Characteristics............................................................................................................... 17 Typical Relative Luminous Flux................................................................................................................................. 19 Current Derating Curves........................................................................................................................................... 21 Typical Radiation Patterns.......................................................................................................................................... 25 Emitter Pocket Tape Packaging.................................................................................................................................. 28 Emitter Reel Packaging............................................................................................................................................... 29 Automotive Product Binning and Labeling............................................................................................................. 30 LUXEON Rebel PC Amber Color Bin Structure................................................................................................. 35 Forward Voltage Bins.............................................................................................................................................. 37 LUXEON Rebel Automotive Specification Datasheet DS58 20121129 2 Product Nomenclature LUXEON Rebel is tested and binned at 350 mA. The part number designation is explained as follows: L X MA - A B C D - E F G H Where: A — designates radiation pattern (value P for Lambertian) B — designates color variant (W for Automotive White, L for Amber and PC Amber, H for Red-Orange) C — designates color variant (0 for Automotive White, Amber, PC Amber, and Red-Orange) D — designates technology (1 for Automotive White, Amber, Red-Orange standard flux direct color; 2 for PC Amber Phosphor-Converted and Red-Orange high flux direct color) E — reserved for future product offerings FGH — minimum luminous flux (lm) performance Products tested and binned at 350 mA follow the part numbering scheme: L X MA - P x 0 x - x x x x Average Lumen Maintenance Characteristics Lifetime for solid-state lighting devices (LEDs) is typically defined in terms of lumen maintenance—the percentage of initial light output remaining after a specified period of time. Philips Lumileds projects that LUXEON Rebel Automotive White products will deliver, on average, 70% lumen maintenance at 50,000 hours of operation at a forward current of 350 mA at 100% duty cycle. This projection is based on constant current operation with junction temperature maintained at or below 135°C. Philips Lumileds projects that red-orange and amber LUXEON Rebel products will deliver, on average, 70% lumen maintenance at 30,000 hours of operation at a forward current of 350 mA at 100% duty cycle. This projection is based on constant current operation with junction temperature maintained at or below 125°C. Philips Lumileds projects that PC Amber LUXEON Rebel products will deliver, on average, 70% lumen maintenance at 5,600 hours of operation at a forward current of 350 mA at 100% duty cycle. This projection is based on constant current operation with junction temperature maintained at or below 135°C. This performance is based on independent test data, Philips Lumileds historical data from tests run on similar material systems, and internal LUXEON reliability testing. Observation of design limits included in this data sheet is required in order to achieve this projected lumen maintenance. Environmental Compliance Philips Lumileds is committed to providing environmentally friendly products to the solid-state lighting market. The LUXEON Rebel is compliant to the European Union directives on the restriction of hazardous substances in electronic equipment, namely the REACH, ELV, and RoHS directives. Philips Lumileds will not intentionally add the following restricted materials to the LUXEON Rebel: lead, mercury, cadmium, hexavalent chromium, polybrominated biphenyls (PBB) or polybrominated diphenyl ethers (PBDE). LUXEON Rebel Automotive Specification Datasheet DS58 20121129 3 Flux Characteristics Flux Characteristics for LUXEON Rebel Junction Temperature, TJ = 25°C [4] Table 1. Performance at Test Current Minimum Luminous Flux (lm) Color Part Number [5] FV [1] [3] Test Current (mA) Typical Performance at Indicated Current Typical Luminous Drive Flux (lm) Current FV [2] [3] (mA) LXMA-PW01-0100 Automotive White LXMA-PW01-0110 100 110 350 350 180 195 700 700 Red-Orange LXMA-PH01-0040 LXMA-PH01-0050 LXMA-PH02-0060 LXMA-PH02-0070 40 50 60 70 350 350 350 350 75 85 122 134 700 700 700 700 Amber LXMA-PL01-0023 LXMA-PL01-0030 LXMA-PL01-0040 23.5 30 40 350 350 350 45 60 70 700 700 700 LXMA-PL02-0080 LXMA-PL02-0090 LXMA-PL02-0100 80 90 100 350 350 350 145 165 180 700 700 700 PC Amber Notes for Table 1: 1. Minimum luminous flux performance guaranteed within published operating conditions. Philips Lumileds maintains a tolerance of ± 6.5% on flux measurements. 2. Typical luminous flux or radiometric power performance when device is operated within published operating conditions. 3. LUXEON Rebel products with even higher luminous flux and radiometric power levels will become available in the future. Please consult Philips Lumileds for more information. 4. Junction Temperature is estimated based on instant measurement at thermal pad temperature of 25°C. 5. Please contact Phiips Lumileds for information on custom part numbers. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 4 Optical Characteristics Lambertian LUXEON Rebel at Test Current [1] Junction Temperature, TJ = 25°C [10] Table 2. Typical [2],[3] Color Temperature Spectral CCT Half-width [5] (nm) Color Min. Typ. Max. Dl1/2 Typical Temperature Coefficient of Dominant Wavelength (nm/°C) DlD/ DTJ Typical Total Included Angle [6] (degrees) u0.90V Typical Viewing Angle [7] (degrees) 2u 1/2 Automotive White [8] 3800 K 5500 K 6300 K — — 160 120 [9] Red-Orange 610.0 nm 617.0 nm 620.0 nm 20 0.08 160 125 Amber [9] 587.0 nm 590.0 nm 592.0 nm 14 0.10 160 125 PC Amber [8] 588.0 nm 591.0 nm 592.0 nm 80 0.10 160 120 Notes for Table 2: 1. LUXEON Rebel is tested and binned at 350 mA. 2. Dominant wavelength is derived from the CIE 1931 Chromaticity diagram and represents the perceived color. Philips Lumileds maintains a tolerance of ± 0.5 nm for dominant wavelength measurements. 3. CCT ±5% tester tolerance. 4. CRI (Color Rendering Index) for white product types is 70 typical. 5. Spectral width at ½ of the peak intensity. 6. Total angle at which 90% of total luminous flux is captured. 7. Viewing angle is the off axis angle from lamp centerline where the luminous intensity is ½ of the peak value. 8. All white and PC Amber products are built with Indium Gallium Nitride (InGaN). 9. All red-orange and amber products are built with Aluminum Indium Gallium Phosphide (AlInGaP). 10. Junction Temperature is estimated based on instant measurement at thermal pad temperature of 25°C. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 5 Electrical Characteristics Electrical Characteristics at 350 mA for LUXEON Rebel, Junction Temperature, Tj = 25ºC Table 3. Typical Dynamic Forward Voltage Vf [1] Resistance [4] (V) (Ω) Color Min. Typ. Max. RD Typical Temperature Coefficient of Forward Voltage [2] (mV/°C) DVF / DTJ Typical Thermal Resistance Junction to Thermal Pad (°C/W) [3] Ru J-C LXMA-PW01-0100 2.55 2.92 3.27 .03 -2.0 to -4.0 10 LXMA-PW01-0110 2.55 2.92 3.27 .03 -2.0 to -4.0 10 LXMA-PH01-0040 2.31 2.9 3.51 1.5 -2.0 to -4.0 12 LXMA-PH01-0050 2.31 2.9 3.51 1.5 -2.0 to -4.0 12 LXMA-PH02-0060 1.80 2.10 2.80 0.57 -2.0 to -4.0 8 LXMA-PH02-0070 1.80 2.10 2.80 0.57 -2.0 to -4.0 8 LXMA-PL01-0023 2.31 2.9 3.51 1.3 -2.0 to -4.0 12 LXMA-PL01-0030 2.31 2.9 3.51 1.3 -2.0 to -4.0 12 LXMA-PL01-0040 2.31 2.9 3.51 1.3 -2.0 to -4.0 12 LXMA-PL02-0080 2.55 2.92 3.27 0.36 -2.0 to -4.0 10 LXMA-PL02-0090 2.55 2.92 3.27 0.36 -2.0 to -4.0 10 LXMA-PL02-0100 2.55 2.92 3.27 0.36 -2.0 to -4.0 10 Notes for Table 3: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. 2. Measured between 25°C = TJ = 110°C at If = 350 mA. 3. Does not include wall plug efficiency. 4. Dynamic resistance is the inverse of the slop in the linear forward voltage model for LEDs. See Forward Voltage vs. Forward Current curves. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 6 Electrical Characteristics Typical Electrical Characteristics at 700 mA for LUXEON Rebel, Junction Temperature, Tj = 25ºC Table 4. Color Typical Forward Voltage Vf (V) LXMA-PW01-0100 LXMA-PW01-0110 LXMA-PH01-0040 LXMA-PH01-0050 LXMA-PH02-0060 LXMA-PH02-0070 LXMA-PL01-0023 LXMA-PL01-0030 LXMA-PL01-0040 LXMA-PL02-0080 LXMA-PL02-0090 LXMA-PL02-0100 Note for Table 4: 1. Philips Lumileds maintains a tolerance of ±0.06V on forward voltage measurements. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 [1] 3.06 3.06 3.60 3.60 2.30 2.30 3.60 3.60 3.60 3.06 3.06 3.06 7 Absolute Maximum Ratings Table 5a. Parameter Automotive White Red-Orange / Amber PC Amber DC Forward Current (mA) Peak Pulsed Forward Current (mA) Average Forward Current (mA) ESD Sensitivity [5] LED Junction Temperature [1] [3] [4] Operating Case Temperature [4] Storage Temperature 700 1000 700 8kV HBM, 400V MM 150°C -40°C - 150°C -40°C - 135°C 700 700 700 8kV HBM, 400V MM 135°C -40°C - 135°C -40°C - 135°C 700 700 700 8kV HBM, 400V MM 135°C -40°C - 135°C -40°C - 135°C Soldering Temperature JEDEC 020c 260°C JEDEC 020c 260°C JEDEC 020c 260°C Allowable Reflow Cycles 3 3 3 Autoclave Conditions 121°C at 2 ATM 100% Relative Humidity for 96 Hours Maximum Reverse Voltage (Vr) See Note 2 See Note 2 See Note 2 Notes for Table 5: 1. Proper current derating must be observed to maintain junction temperature below the maximum. 2. LUXEON Rebel LEDs are not designed to be driven in reverse bias. 3. LUXEON Rebel Automotive LEDs driven at maximum LED junction temperature will have limited lifetime. 4. Please consult with Philips Lumileds for more information on maximum time durations and forward currents for these temperature ranges. 5. Measured using human body model and machine model (per AEC-Q101C). Absolute Minimum Ratings Table 5b. Parameter Automotive White Red-Orange / Amber PC Amber DC Forward Current (mA) 50 50 50 JEDEC Moisture Sensitivity Table 6. Soak Requirements Level Floor Life Standard Time ConditionsTime Conditions 1 unlimited [ 30°C / 85% RH LUXEON Rebel Automotive Specification Datasheet DS58 20121129 168h + 5 / -0 85°C / 85% RH 8 Reflow Soldering Characteristics JEDEC 020c Temperature Profile for Table 7. Table 7. Profile Feature Lead Free Assembly Average Ramp-Up Rate (Tsmax to Tp) 3°C / second max Preheat Temperature Min (Tsmin) 150°C Preheat Temperature Max (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 - 180 seconds Temperature (TL) 217°C Time Maintained Above Temperature TL (tL) 60 - 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds Ramp - Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Note for Table 7: 1. All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 9 Mechanical Dimensions Figure 1. Package outline drawing. Notes for Figure 1: 1. Do not handle the device by the lens—care must be taken to avoid damage to the lens or the interior of the device that can be damaged by excessive force to the lens. 2. Drawings not to scale. 3. All dimensions are in millimeters. 4. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 10 Pad Configuration Figure 2. Pad configuration. Note for Figure 2: 1. The Thermal Pad is electrically isolated from the Anode and Cathode contact pads. Solder Pad Design Figure 3. Solder pad layout. Note for Figure 3: The photograph shows the recommended LUXEON Rebel layout on Printed Circuit Board (PCB). This design easily achieves a thermal resistance of 7 K/W. Application Brief AB32 provides extensive details for this layout. In addition, the .dwg files are available at www.philipslumileds.com. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 11 Wavelength Characteristics Red-Orange and Amber AlInGap at Test Current Thermal Pad Temperature = 25°C Relative Spectral Power Distribution 1.0 Amber 0.8 Red-Orange 0.6 0.4 0.2 0.0 400 500 450 550 600 650 700 Wavelength (nm) Figure 4. Relative intensity vs. wavelength. Automotive White, Thermal Pad Temperature = 25°C 1.2 Re elative Spe ectral Pow wer Distrib bution 1 0.8 0.6 0.4 0.2 0 300 400 500 600 700 800 900 Wavelength (nm) Figure 5. White color spectrum of typical CCT part, integrated measurement. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 12 PC Amber, Thermal Pad Temperature = 25°C 1.2 Re elative Spe ectral Pow wer Distrib bution 1 0.8 0.6 0.4 0.2 0 300 400 500 600 700 800 900 Wavelength (nm) Figure 6. Relative intensity vs. wavelength. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 13 Typical Light Output Characteristics over Temperature Automotive White at 350 mA and 700 mA Currents 2.0 1.8 Relattive Lumin nous Flux x 1.6 1.4 1.2 1.0 0.8 350mA 0.6 0.4 700mA 0.2 00 0.0 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 110 120 Thermal Pad Temperature (oC) Figure 7. Relative light output vs. thermal pad temperature for Automotive White (Monopulse Measurement, H/C factor is color bin dependent; 5000K to 6300K shown). PC Amber at 350 mA and 700 mA Currents 2 Relative Lum minous Flu ux 1.75 1.5 1 25 1.25 1 350 mA 0.75 700 mA 0.5 -50 -40 -30 -20 -10 0 10 20 30 40 50 Thermal Pad Temperature 60 70 80 90 100 110 (oC) Figure 8. Relative light output vs. thermal pad temperature for PC Amber (Monopulse Measurement). LUXEON Rebel Automotive Specification Datasheet DS58 20121129 14 Red-Orange and Amber AlInGap at 350 mA Current 1.75 Red-orange (LXMA-PH01 & LXMA-PH02) Relativ ve Luminous Flux Output 1.50 Amber 1.25 1.00 0.75 0.50 0.25 0.00 -20 0 20 40 60 80 100 Thermal Pad Temperature (°C) Figure 9. Relative light output vs. thermal pad temperature for Red-Orange and Amber AlInGaP at Test Current (Monopulse Measurement). LUXEON Rebel Automotive Specification Datasheet DS58 20121129 15 Typical Forward Current Characteristics Automotive White, Thermal Pad Temperature = 25°C and 85°C 800.00 25C 700.00 85C Poly.25C (25C) Forwa ard Curren nt (mA) 600.00 Poly.85C (85C) 500.00 400.00 300 00 300.00 200.00 100.00 0.00 2.6 2.65 2.7 2.75 2.8 2.85 2.9 2.95 3 3.05 3.1 Forward Voltage (V) Figure 10. Forward current vs. forward voltage for Automotive White (Monopulse Measurement) at various thermal pad temperatures. [extend to 50 mA] PC Amber, Thermal Pad Temperature = 25°C and 85°C 800 700 Forw ward Curre ent (mA) 600 500 400 300 25C 200 25C(25C) Expon. 100 0 85C(85C) Expon. 2.6 2.7 2.8 2.9 3 3.1 3.2 Forward Voltage (V) Figure 11. Forward current vs. forward voltage ffor PC Amber (Monopulse Measurement) at various thermal pad temperatures. [extend to 50 mA] Notes for Figures 10 & 11: Driving these high power devices at currents less than the test conditions (350 mA and 700 mA) may produce unpredictable results and may be subject to variation in performance. Pulse width modulation (PWM) is recommended for dimming effects. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 16 Red-Orange and Amber AlInGaP, Thermal Pad Temperature = 25°C Forrward Current (mA) 1000 900 Red-Orange (LXMA-PH02) 800 Red-Orange (LXMA-PH01) & Amber (LXMA-PL01) 700 600 500 400 300 200 100 0 1.8 2.0 2.2 2.4 2.6 2.8 3.0 3.2 3.4 3.6 3.8 Forward Voltage (V) Figure 12. Forward current vs. forward voltage for Red-Orange and Amber AlLnGaP (Monopulse Measurement) at 25°C thermal pad temperature. Note for Figure 12: Driving these high power devices at currents less than the test conditions (350 mA and 700 mA) may produce unpredictable results and may be subject to variation in performance. Pulse width modulation (PWM) is recommended for dimming effects. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 17 Typical Relative Luminous Flux Relative Luminous Flux vs. Forward Current for Automotive White, Thermal Pad Temperature = 25°C and 85°C 2.0 1.8 Relattive Lumin nous Flux 1.6 14 1.4 1.2 1.0 0.8 25C 0.6 85C Poly. (25C) 25C 0.4 Poly. (85C) 85C 0.2 0.0 0 100 200 300 400 500 600 700 800 Forward Current (mA) Figure 13. Relative luminous flux vs. forward current for Automotive White (Monopulse). Typical Relative Luminous Flux vs. Forward Current for PC Amber, Thermal Pad Temperature = 25°C and 85°C 2 Realttive Lumin nous Flux 1.75 15 1.5 1.25 1 0.75 25C 0.5 85C Power (25C) 25C 0.25 Power (85C) 85C 0 50 150 250 350 450 550 650 750 Current (mA) Figure 14. Relative luminous flux vs. forward current for PC Amber (Monopulse). LUXEON Rebel Automotive Specification Datasheet DS58 20121129 18 Relative Luminous Flux vs. Forward Current for Red-Orange and Amber AlInGaP, Thermal Pad Temperature = 25°C Relative Lum minous Flux/Radiometric Power 2.00 1.75 1.50 1.25 1.00 0.75 Red-Orange (LXMA-PH02) 0.50 Red-Orange (LXMA-PH01) & Amber (LXMA-PL01) 0.25 0.00 0 100 200 300 400 500 600 700 800 Forward Current (mA) Figure 15. Relative luminous flux vs. forward current for Red-Orange and Amber (Monopulse). LUXEON Rebel Automotive Specification Datasheet DS58 20121129 19 Current Derating Curves Current Derating Curve for 350 mA Drive Current Automotive White 650 Case to Heat Sink Thermal Resistance (does not include LED thermal resistance) - K/W: 5 25 550 35 45 Current (m mA) 450 350 250 150 50 0 25 50 75 100 125 150 175 TA - Ambient Temperature (oC) Figure 16. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC for Automotive White. Current Derating Curve for 350 mA Drive Current PC Amber 650 5 Case to Heat Sink Thermal Resistance (does not include LED thermal resistance) - K/W: 550 25 35 Current (mA A) 450 45 350 250 150 50 0 25 50 75 100 125 150 175 TA - Ambient Temperature (oC) Figure 17. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC for PC Amber. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 20 Current Derating Curve for 350 mA Drive Current Red-Orange and Amber AlInGap 650 5 550 25 Case to Heat Sink Thermal Resistance (does not include LED thermal resistance) - K/W: 35 45 Current (mA) 450 350 250 150 50 0 25 50 75 100 125 TA - Ambient Temperature 150 175 (oC) Figure 18. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC for LXMA-PH01 for Red-Orange and Amber. Current Derating Curve for 350 mA Drive Current Red-Orange AlInGaP 650 5 Case to Heat Sink Thermal Resistance (does not include LED thermal resistance) - K/W: 25 550 35 45 Current (mA A) 450 350 250 150 50 0 25 50 75 100 125 150 175 TA - Ambient Temperature (oC) Figure 19. Maximum Forward Current vs. Ambient Temperature, Based on TJMAX = 135ºC for Red-Orange LXMA-PH02. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 21 Current Derating Curve for 700 mA Drive Current Automotive White Case to Heat Sink Thermal Resistance (does not include LED thermal resistance) - K/W: 1050 5 25 35 Current (mA) C 850 45 650 450 250 50 0 25 50 75 100 TA - Ambient Temperature 125 150 175 (oC) Figure 20. Maximum forward current vs. ambient temperature, based on TJMAX = 150ºC for Automotive White. Current Derating Curve for 700 mA Drive Current PC Amber Case to Heat Sink Thermal Resistance (does not include LED thermal resistance) - K/W: 1050 5 25 35 45 Current ((mA) 850 650 450 250 50 0 25 50 75 100 125 150 175 TA - Ambient Temperature (oC) Figure 21. Maximum Forward Current vs. Ambient Temperature, Based on TJMAX = 135ºC for PC Amber. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 22 Current Derating Curve for 700 mA Drive Current Red-Orange and Amber AlInGaP 1050 Case to Heat Sink Thermal Resistance (does not include LED thermal resistance) - K/W: 950 5 25 35 850 45 Current (mA) 750 650 550 450 350 250 150 50 0 25 50 75 100 125 150 175 TA - Ambient Temperature (oC) Figure 22. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC for Red-Orange LXMA-PH01 and Amber AlInGaP. Current Derating Curve for 700 mA Drive Current Red-Orange AlInGaP 1050 Case to Heat Sink Thermal Resistance (does not include LED thermal resistance) - K/W: 950 5 25 35 850 45 Current (mA) 750 650 550 450 350 250 150 50 0 25 50 75 100 TA - Ambient Temperature 125 150 175 (oC) Figure 23. Maximum forward current vs. ambient temperature, based on TJMAX = 135ºC for Red-Orange LXMA-PH02 AlInGaP. Notes for Figures 18-23: Current derating curves represent constant current operation condition. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 23 Typical Radiation Patterns Typical Representative Spatial Radiation Pattern for Automotive White Lambertian 100% 90% Relative Intensity (%) 80% 70% 60% 50% 40% 30% 20% 10% 0% -100 -80 -60 -40 -20 0 20 40 60 80 100 Angular Displacement (Degrees) Figure 24: Typical representative spatial radiation pattern for Automotive White lambertian. Typical Polar Radiation Pattern for Automotive White Lambertian 0° -30° 30° 60° -60° 60° -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 Figure 25: Typical polar radiation pattern for Automotive White lambertian. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 24 Typical Representative Spatial Radiation Pattern for PC Amber Lambertian 1.2 Relative In R ntensity 1 0.8 0.6 0.4 0.2 -100 -80 -60 -40 -20 0 0 20 40 60 80 100 Angular Displacement deg Figure 26: Typical representative spatial radiation pattern for PC Amber lambertian. Typical Polar Radiation Pattern for PC Amber Lambertian 0° 30° -30° 60° -60° -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 Figure 27: Typical polar radiation pattern for PC Amber lambertian. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 25 Typical Representative Spatial Radiation Pattern for Red-Orange and Amber AlInGaP Lambertian 100% 90% 80% Relative R Intensity % 70% 60% 50% 40% 30% Red-Orange LXMA-PH02 20% Red-Orange LXMA-PH01 & Amber LXMA-PL01 10% 0% -90 -75 -60 -45 -30 -15 0 15 30 45 60 75 90 Angular Displacement deg Figure 28: Typical representative spatial radiation pattern for Red-Orange lambertian (LMXA-PH01) and Amber AlInGaP. Typical Polar Radiation Pattern for Red-Orange and Amber AlInGaP Lambertian 0° -30° 30° 60° -60° -1.0 -0.8 -0.6 -0.4 -0.2 0.0 0.2 0.4 0.6 0.8 1.0 Red-Orange (LXMA-PH02) Red-Orange LMXA-PH01 & Amber LXMA-PL01 Figure 29: Typical polar radiation pattern for for Red-Orange lambertian (LMXA-PH01) and Amber. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 26 Emitter Pocket Tape Packaging 20 1000 50 Figure 30. Emitter pocket tape packaging. Note: SPI may vary from 1000. Please contact Philips Lumileds for more information. 21 LUXEON Rebel Automotive Specification Datasheet DS58 20121129 27 Emitter Reel Packaging Figure 31. Emitter reel packaging. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 28 Automotive Product Binning and Labeling Purpose of Product Binning In the manufacturing of semiconductor products, there is a variation of performance around the average values given in the technical data sheets. For this reason, Philips Lumileds bins the LED components for luminous flux, color and forward voltage (VF). Decoding Product Bin Labeling LUXEON Rebel Emitters are labeled using a three or four digit alphanumeric code (CAT code) depicting the bin values for emitters packaged on a singe reel. All emitters packaged within a reel are of the same 3-variable bin combination. Using these codes it is possible to determine optimum mixing and matching of products for consistency in a given application. Format of Labeling for Emitters Reels of Red-Orange and Amber Emitters are labeled with a three digit alphanumeric CAT code following the format below. ABC A = Flux bin (P, Q, R, S, etc.) B = Color bin (2, 4, etc.) C = VF bin (E, F, G, etc.) Reels of Automotive White Emitters are labeled with a four digit alphanumeric CAT code following the format below. ABCD A = Flux bin (P, Q, R, S, etc.) B and C = Color bin (WN, W0, WP, WQ,VN,V0 etc.) D = VF bin (E, F, G, etc.) LUXEON Rebel Automotive Specification Datasheet DS58 20121129 29 Luminous Flux Bins Table 8 lists the standard photometric luminous flux bins for LUXEON Rebel emitters. Although several bins are outlined, product availability in a particular bin varies by production run and by product performance. Not all bins are available in all colors. Table 8. Flux Bins - All Colors (except Royal-Blue) Minimum Photometric Flux Maximum Photometric Flux Bin Code (lm) (lm) E 23.5 30 F 30 40 G 40 50 H 50 60 J 60 70 K 70 80 L 80 90 M 90 100 N 100 110 X 110 120 P 120 130 Y 130 140 Q 140 160 Note for Table 8: 1. Photometric luminous flux bin structure for LUXEON Rebel emitters. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 30 LUXEON Rebel Automotive White Color Bin Structure Automotive White LUXEON Rebel Emitters for Automotive applications are tested and binned by x,y coordinates. Table 9. Bin Code x y A1 0.314792 0.328823 0.329220 0.317466 Typical CCT (K) Bin Code x y 0.344438 6000 A7 0.356917 0.331331 0.320438 0.314792 0.344438 A2 0.317466 0.320438 6000 A9 0.329220 0.331331 0.329544 0.310495 0.319597 0.301201 0.317466 0.320438 A3 0.328823 0.356917 5300 0.346904 0.371742 0.344443 0.344232 0.329220 0.331331 0.328823 0.356917 Note for Table 9: 1. Philips Lumileds maintains a tester tolerence of ± 0.005 on x, y color coordinates. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 Typical CCT (K) 0.364212 0.381106 0.374075 0.359401 0.382878 4300 0.393747 0.365822 0.355699 0.364212 0.381106 0.396279 0.387071 0.374075 0.381106 0.382878 0.393747 0.403508 0.373899 0.365822 0.393747 3950 31 Graphical Presentation of LUXEON Rebel Automotive White xy Coordinates 0.43 3800K 0.41 4100K 4500K 0.39 SN S0 A7 0.37 5560K 6300K 0.35 VN blackbody locus A9 TN 5000K T0 A3 V0 WN SAE Specification y A1 W0 0.33 WP 0.31 A2 WQ 0.29 0.27 0.25 0.29 0.31 0.33 0.35 x 0.37 0.39 0.41 0.43 Figure 32. LUXEON Rebel White Automotive color binning structure graphical representation. Coordinates listed in Table 9. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 32 LUXEON Rebel Automotive White Color Binning Structure (A1 ... A10) and White CAT Code Labeling Nomenclature Table 10. Automotive Binning Scheme CAT Code on Product Label A1 A2 A3 A7 A9 WN, W0 WP, WQ VN, V0 TN, T0 SN, S0 Philips Lumileds Automotive White Color Bins (A1, A2, A3, A7, A9) are comprised of two white bins from the Philips Lumileds standard 18-Bin white binning structure (i.e. WN, W0, etc.). A1, A2, A3, A7, and A9 bins are supportable. Binning is program specific, and will be finalized upon mutual agreement and confirmation of supportability by Philips Lumileds. Philips Lumileds ships product tested and binned according to its standard white binning structure (WN, W0, etc.) in order to provide increased color granularity. Therefore the product label uses the standard 18-Bin white binning CAT code labeling nomenclature. Table 10 may be used to decode the standard white bins on the product label back to the corresponding automotive bins. For more information on the Philips Lumileds standard 18-Bin white binning structure and its CAT code nomenclature please refer to AB21 on www.philipslumileds.com. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 33 LUXEON Rebel PC Amber Color Bin Structure Figure 33: LUXEON Rebel PC Amber Automotive binning structure graphical representation. Coordinates listed in Table 11. LUXEON Rebel PC Amber Color Bin Coordinates Table 11. LUXEON Rebel PC Amber Bin Coordinates Color Bin x 0.5622 2 0.5576 0.5775 0.5843 0.5705 4 0.5775 0.5576 0.5499 y 0.4372 0.4326 0.4132 0.4151 0.4111 0.4132 0.4326 0.4249 Notes for Table 11: 1. LUXEON Rebel PC Amber emitters are tested and binned by x, y coordinates. 2. Philips Lumileds maintains a tester tolerance of ± 0.005 on x, y coordinates. 3. Test conditions of 350 mA with current pulse duration of 20ms. LUXEON Rebel Automotive Specification Datasheet DS58 20121129 34 Red-Orange LUXEON Rebel Emitters for automotive applications are tested and binned for dominant wavelength. Dominant Wavelength Color Bin Structure for LUXEON Rebel Red-Orange AlInGap Table 12. Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 2 613.5 620.5 Amber LUXEON Rebel Emitters for automotive applications are tested and binned for dominant wavelength. Dominant Wavelength Color Bin Structure for LUXEON Rebel Amber Table 13. Bin Code Minimum Dominant Wavelength (nm) Maximum Dominant Wavelength (nm) 2 4 587.0 589.5 589.5 592.0 LUXEON Rebel Automotive Specification Datasheet DS58 20121129 35 Forward Voltage Bins Table 14 and 15 lists minimum and maximum VF bin values per emitter. Although several bins are outlined, product availability in a particular bin varies by production. Table 14. Forward Voltage Bin Structure for LUXEON Rebel Automotive White, Red-Orange LXMA-PH01, PC Amber and Amber Emitters Minimum Forward Voltage Maximum Forward Voltage Bin Code (V) (V) A B C D E 2.31 2.55 2.79 3.03 3.27 2.55 2.79 3.03 3.27 3.51 Table 15. Forward Voltage Bin Structure for LUXEON Rebel Automotive Red-Orange LXMA-PH02 Emitters VF bins Minimum Forward Voltage Bin Code (V) Maximum Forward Voltage (V) V W X Y Z 1.80 2.00 2.20 2.40 2.60 2.00 2.20 2.40 2.60 2.80 LUXEON Rebel Automotive Specification Datasheet DS58 20121129 36 Company Information Philips Lumileds is a leading provider of LEDs for everyday lighting applications. The company’s records for light output, efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, consumer electronics, and automotive lighting. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com. ©2012 Philips Lumileds Lighting Company. All rights reserved. Product specifications are subject to change without notice. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com