LCA110 Single-Pole, Normally Open OptoMOS® Relay INTEGRATED CIRCUITS DIVISION Parameter Blocking Voltage Load Current On-Resistance (max) Ratings 350 120 35 Units VP mArms & mADC Description The LCA110 is a normally open (1-Form-A) Solid State Relay which uses optically coupled MOSFET technology to provide 3750Vrms of input to output isolation. Its optically coupled outputs, which use the patented OptoMOS architecture, are controlled by a highly efficient GaAIAs infrared LED. Features • 3750Vrms Input/Output Isolation • Low Drive Power Requirements (TTL/CMOS Compatible) • High Reliability • Arc-Free With No Snubbing Circuits • No EMI/RFI Generation • Small 6-Pin Package • Machine Insertable, Wave Solderable • Surface Mount Tape & Reel Version Available • V-0 Flammability Classification Rating The LCA110 can be used to replace mechanical relays, and offers the superior reliability associated with semiconductor devices. Approvals • UL Recognized Component: File E76270 • CSA Certified Component: Certificate 1175739 • EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Ordering Information Part # LCA110 LCA110S LCA110STR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1,000/Reel) Pin Configuration AC/DC Configuration + Control - Control NC 1 6 2 5 3 4 DC Only Configuration Load Do Not Use + Control - Control Load NC 1 6 2 5 3 4 + Load - Load Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb DS-LCA110-R12 toff e3 www.ixysic.com 1 INTEGRATED CIRCUITS DIVISION LCA110 Absolute Maximum Ratings @ 25ºC Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / ºC 2 Derate linearly 6.67 mW / ºC Ratings 350 5 50 1 150 800 3750 -40 to +85 -40 to +125 Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Units VP V mA A mW mW Vrms °C °C Electrical Characteristics @ 25ºC Parameter Output Characteristics Load Current AC/DC Configuration, Continuous 1 DC Configuration, Continuous 1 Peak On-Resistance 2 AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current to Activate Input Control Current to Deactivate Input Voltage Drop Reverse Input Current Common Characteristics Capacitance, Input to Output 1 2 Conditions Min Typ Max Units - - 120 200 350 mArms & mADC mADC mA 23 7 - 35 10 1 ILEAK - µA VL=50V, f=1MHz ton toff COUT - 25 3 3 - ms ms pF IL = 120mA IF = 5mA VR = 5V IF IF VF IR 0.4 0.9 - 1.2 - 2 1.4 10 mA mA V µA - CI/O - 3 - pF t=10ms Symbol IL ILPK IL=120mA IL=200mA VL=350VP IF = 5mA, VL = 10V RON If both poles operate, then the load current must be derated so that the package power dissipation value is not exceeded. Measurement taken within 1 second of on-time. 2 www.ixysic.com R12 INTEGRATED CIRCUITS DIVISION LCA110 PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* 25 20 15 10 5 1.17 25 1.19 1.21 1.23 15 10 5 20 15 10 5 0 0.82 1.25 0.84 0.86 0.88 0.90 0.92 0.94 0.285 0.295 0.305 0.315 0.325 0.335 0.345 LED Forward Voltage Drop (V) Turn-On Time (ms) Turn-Off Time (ms) Typical IF for Switch Operation (N=50, IL=120mADC) Typical IF for Switch Dropout (N=50, IL=120mADC) Typical On-Resistance Distribution (N=50, IL=120mADC) 25 20 Device Count (N) Device Count (N) 20 0 0 Typical Turn-Off Time (N=50, IF=2mA, IL=120mADC) 25 Device Count (N) Device Count (N) Device Count (N) 30 25 Typical Turn-On Time (N=50, IF=2mA, IL=120mADC) 15 10 5 0 35 30 20 Device Count (N) 35 Typical LED Forward Voltage Drop (N=50, IF=5mA) 15 10 5 0.65 0.91 1.17 1.43 1.69 20 15 10 5 0 0.39 25 0 1.95 0.39 0.65 0.91 LED Current (mA) 1.17 1.43 1.69 20.2 1.95 20.4 LED Current (mA) 20.6 20.8 21.0 21.2 21.4 On-Resistance (:) Typical Blocking Voltage Distribution (N=50) 35 Device Count (N) 30 25 20 15 10 5 0 427 430 433 436 439 442 Blocking Voltage (VP) Typical Turn-On Time vs. LED Forward Current (IL=120mADC) 1.6 1.4 I F =50mA 1.2 I F =10mA I F =5mA 1.0 0.8 -40 -20 0 20 40 60 Temperature (ºC) 80 100 120 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Typical Turn-Off Time vs. LED Forward Current (IL=120mADC) 0.7 0.6 Turn-Off Time (ms) 1.8 Turn-On Time (ms) LED Forward Voltage Drop (V) Typical LED Forward Voltage Drop vs. Temperature 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 LED Forward Current (mA) 45 50 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R12 www.ixysic.com 3 INTEGRATED CIRCUITS DIVISION LCA110 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 I F =5mA I F =10mA -40 3.0 -20 0 20 40 60 80 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 50 0 40 60 80 100 -40 -20 0 20 40 60 80 100 Typical IF for Switch Dropout vs. Temperature (IL=70mADC) Typical Load Current vs. Load Voltage (N=50, IF=2mA) 3.0 150 1.5 1.0 0.5 0 0 -20 0 20 40 60 80 Load Current (mA) LED Current (mA) 2.0 -20 0 20 40 60 80 100 I F =10mA 140 I F =5mA 120 100 AC/DC Configuration I F =10mA I F =5mA 60 0 60 -2 -1 80 100 120 1 2 3 Typical Leakage vs. Temperature Measured Across Pins 4&6 430 0.016 425 0.014 420 415 410 405 0.012 0.010 0.008 0.006 0.004 400 0.002 -40 Temperature (ºC) 0 Load Voltage (V) 395 40 -3 Leakage (PA) 160 Blocking Voltage (VP) DC Configuration 20 -50 Typical Blocking Voltage vs. Temperature 180 0 0 Temperature (ºC) Maximum Load Current vs. Temperature -20 50 -150 -40 100 100 -100 Temperature (ºC) Load Current (mA) 20 Typical IF for Switch Operation vs. Temperature (IL=70mADC) 0.5 -40 10 Temperature (ºC) 1.0 80 IF=5mA 20 Temperature (ºC) 1.5 200 30 Temperature (ºC) 2.0 210 IF=10mA 40 0 -20 2.5 -40 Typical Steady State On-Resistance vs. Temperature (IL=120mADC) 60 -40 100 2.5 LED Current (mA) Typical Turn-Off Time vs. Temperature (IF=5mA, IL=70mADC) On-Resistance (:) Typical Turn-On Time vs. Temperature (IL=70mADC) Turn-Off Time (ms) Turn-On Time (ms) PERFORMANCE DATA @25ºC (Unless Otherwise Noted)* -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 Temperature (ºC) Temperature (ºC) Load Current (A) Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10Ps 100Ps 1ms 10ms 100ms 1s 10s 100s Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.ixysic.com R12 INTEGRATED CIRCUITS DIVISION LCA110 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating LCA110 / LCA110S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time LCA110 / LCA110S 250ºC for 30 seconds Board Wash IXYS Integrated Circuits Division recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since IXYS Integrated Circuits Division employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R12 e3 www.ixysic.com 5 INTEGRATED CIRCUITS DIVISION LCA110 MECHANICAL DIMENSIONS LCA110 8.382 ± 0.381 (0.330 ± 0.015) PCB Hole Pattern 7.239 TYP (0.285 TYP) 2.54 ± 0.127 (0.100 ± 0.005) 6 - 0.800 DIA. (6 - 0.031 DIA.) 9.144 ± 0.508 (0.360 ± 0.020) 6.350 ± 0.127 (0.250 ± 0.005) 2.540 ± 0.127 (0.100 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) Pin 1 7.620 ± 0.254 (0.300 ± 0.010) 1.651 ± 0.254 (0.065 ± 0.010) 3.302 ± 0.051 (0.130 ± 0.002) 0.254 ± 0.0127 (0.010 ± 0.0005) 6.350 ± 0.127 (0.250 ± 0.005) 5.080 ± 0.127 (0.200 ± 0.005) 4.064 TYP (0.160 TYP) Dimensions mm (inches) 0.457 ± 0.076 (0.018 ± 0.003) LCA110S 8.382 ± 0.381 (0.330 ± 0.015) 9.524 ± 0.508 (0.375 ± 0.020) Pin 1 0.635 ± 0.127 (0.025 ± 0.005) PCB Land Pattern 2.54 ± 0.127 (0.100 ± 0.005) 2.54 (0.10) 6.350 ± 0.127 (0.250 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 1.651 ± 0.254 (0.065 ± 0.010) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.0127 (0.010 ± 0.0005) 8.90 (0.3503) 1.65 (0.0649) 0.65 (0.0255) 3.302 ± 0.051 (0.130 ± 0.002) 4.445 ± 0.254 (0.175 ± 0.010) Dimensions mm (inches) 1.651 ± 0.254 (0.065 ± 0.010) 6 www.ixysic.com R12 INTEGRATED CIRCUITS DIVISION LCA110 LCA110STR Tape & Reel 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) W=16.00 (0.63) B0 = 10.10 (0.398) K0 = 4.90 (0.19) K1 = 3.80 (0.15) A0 = 10.10 (0.398) P = 12.00 (0.472) User Direction of Feed Embossed Carrier Embossment Dimensions mm (inches) NOTES: 1. All dimensions carry tolerances of EIA Standard 481-2 2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.ixysic.com IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-LCA110-R12 ©Copyright 2012, IXYS Integrated Circuits Division OptoMOS® is a registered trademark of IXYS Integrated Circuits Division All rights reserved. Printed in USA. 12/22/2012