Aluminum Electrolytic Capacitors/ EX Snap-in Type Series: Type : TS EX ■ Features VDE-0860 specification Endurance : 105°C 2000 h Japan ■ Recommended Applications Smoothing circuits, AC adaptor ■ Specifications Category temp. range -25 to + 105°C 250 V .DC Rated W.V. Range Nominal Cap. Range 100 to 1200 µ F ±20 % (120Hz/+20°C) (µA) max. after 5 minutes application of rated working voltage at +20°C Capacitance(µF) V: W.V. (V.DC) Capacitance Tolerance 3ÖCV DC Leakage Current Dissipation Factor Frequency Correction Factor for Ripple Current Over voltage characteristics Please see the attached standard products list Frequency (Hz) 50 60 100 120 500 1k 10k to Correction Factor 0.93 0.95 0.99 1.00 1.05 1.08 1.15 After applying 360V.DC for 7 hours at following either temperature, capacitor shall not short-circuit or vent shall not operate. Condition (A) at 70°C Condition (B) at 35°C After 2000 hours application of DC voltage with specified ripple current (< rated DC working voltage) at +105°C, the capacitor shall meet the following limits. Endurance Capacitance change ±20 % of initial measured value < 200 % of initial specified value D.F. DC leakage current < initial specified value After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized at +20 °C, capacitors shall meet the limits specified in “Endurance”.(With voltage treatment) Shelf Life ■ Dimensions in mm (not to scale) (10.0) 2-φ2.0±0.1 φD+1.0 max Polarity bar 10.0±0.1 P.V.C. sleeve Vent L+2.0 max Recommended PWB piercing plan ❉ (Standard terminal type) +0.2 0.8 - 0.1 4.0±0.5 ❉ +0.2 0.8 - 0.1 2.0 max Terminal 2.0 max (t= 0.8) Top of spin 1.5 ± 0.2 (4.0) (3.5) 6.3±1.0 ❉ Top of spin 1.5±0.2 Standard terminal type does not require for cutting off process for terminals. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 Ñ EE173 Ñ Aluminium Electrolytic Capacitors/EX ■ Standard Products Condition A (70°C) Case size W.V. Cap. (±20%) (V) (µF) (mm) Specification Part No. Ripple (Standard Terminals) D.F. current Terminal Length Terminal Length (120Hz) (120Hz) 4.0mm 6.3mm (+20°C) (+105°C) (Without P.V.C. plate) (Without P.V.C. plate) (mm) (A) Min. PackagingQ'ty Length (pcs) 100 22 25 0.70 0.20 ECOS2EG101DX ECEC2EG101DX 200 120 22 30 0.75 0.20 ECOS2EG121EX ECEC2EG121EX 200 150 22 30 0.80 0.20 ECOS2EG151EX ECEC2EG151EX 200 25 25 0.80 0.20 ECOS2EG151JX ECEC2EG151JX 200 180 22 35 0.90 0.20 ECOS2EG181FX ECEC2EG181FX 200 25 30 0.90 0.20 ECOS2EG181KX ECEC2EG181KX 200 220 22 40 1.00 0.20 ECOS2EG221GX ECEC2EG221GX 200 270 250 Dia. 330 390 470 25 30 1.00 0.20 ECOS2EG221KX ECEC2EG221KX 200 30 25 1.00 0.20 ECOS2EG221QX ECEC2EG221QX 100 22 45 1.10 0.20 ECOS2EG271GX ECEC2EG271GX 200 25 35 1.10 0.20 ECOS2EG271LX ECEC2EG271LX 200 30 30 1.10 0.20 ECOS2EG271RX ECEC2EG271RX 100 22 50 1.20 0.20 ECOS2EG331HX ECEC2EG331HX 200 25 40 1.20 0.20 ECOS2EG331MX ECEC2EG331MX 200 30 30 1.20 0.20 ECOS2EG331RX ECEC2EG331RX 100 35 25 1.20 0.20 ECOS2EG331WX ECEC2EG331WX 100 25 45 1.30 0.20 ECOS2EG391MX ECEC2EG391MX 200 30 35 1.30 0.20 ECOS2EG391SX ECEC2EG391SX 100 35 30 1.30 0.20 ECOS2EG391XX ECEC2EG391XX 100 25 50 1.40 0.20 ECOS2EG471NX ECEC2EG471NX 200 30 40 1.40 0.20 ECOS2EG471TX ECEC2EG471TX 100 35 30 1.40 0.20 ECOS2EG471XX ECEC2EG471XX 100 30 45 1.50 0.20 ECOS2EG561TX ECEC2EG561TX 100 35 35 1.50 0.20 ECOS2EG561VX ECEC2EG561VX 100 30 50 1.70 0.20 ECOS2EG681UX ECEC2EG681UX 100 35 40 1.70 0.20 ECOS2EG681YX ECEC2EG681YX 100 820 35 45 2.00 0.20 ECOS2EG821YX ECEC2EG821YX 100 1000 35 50 2.20 0.20 ECOS2EG102ZX ECEC2EG102ZX 100 560 680 Endurance : 105°C 2000 h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE174 – Aluminium Electrolytic Capacitors/EX ■ Standard Products Condition B (35°C) Case size W.V. Cap. (±20%) (V) Specification Part No. Ripple D.F. current (120Hz) (120Hz) Terminal Length 6.3mm (+105°C) (+20°C) (Without P.V.C.plate) (mm) (A) Length Min.PackagingQ'ty (Standard Terminals) Terminal Length 4.0mm (PCS) (µF) (mm) 120 150 22 22 25 30 0.75 0.80 0.20 0.20 ECOS2EG121DK ECEC2EG121DK ECOS2EG151EK ECEC2EG151EK 200 200 180 22 30 0.90 0.20 ECOS2EG181EK ECEC2EG181EK 200 25 25 0.90 0.20 ECOS2EG181JK ECEC2EG181JK 200 220 270 330 250 Dia. 390 470 560 680 820 (Without P.V.C.plate) 22 35 1.00 0.20 ECOS2EG221FK ECEC2EG221FK 200 25 30 1.00 0.20 ECOS2EG221KK ECEC2EG221KK 200 22 40 1.10 0.20 ECOS2EG271GK ECEC2EG271GK 200 25 30 1.10 0.20 ECOS2EG271KK ECEC2EG271KK 200 30 25 1.10 0.20 ECOS2EG271QK ECEC2EG271QK 100 22 45 1.20 0.20 ECOS2EG331GK ECEC2EG331GK 200 25 35 1.20 0.20 ECOS2EG331LK ECEC2EG331LK 200 30 30 1.20 0.20 ECOS2EG331RK ECEC2EG331RK 100 22 50 1.30 0.20 ECOS2EG391HK ECEC2EG391HK 200 25 40 1.30 0.20 ECOS2EG391MK ECEC2EG391MK 200 30 30 1.30 0.20 ECOS2EG391RK ECEC2EG391RK 100 35 25 1.30 0.20 ECOS2EG391WK ECEC2EG391WK 100 25 45 1.40 0.20 ECOS2EG471MK ECEC2EG471MK 200 30 35 1.40 0.20 ECOS2EG471SK ECEC2EG471SK 200 35 30 1.40 0.20 ECOS2EG471XK ECEC2EG471XK 200 25 50 1.50 0.20 ECOS2EG561NK ECEC2EG561NK 200 30 40 1.50 0.20 ECOS2EG561TK ECEC2EG561TK 100 35 30 1.50 0.20 ECOS2EG561XK ECEC2EG561XK 100 30 40 1.70 0.20 ECOS2EG681TK ECEC2EG681TK 100 35 35 1.70 0.20 ECOS2EG681VK ECEC2EG681VK 100 30 50 2.00 0.20 ECOS2EG821UK ECEC2EG821UK 100 35 40 2.00 0.20 ECOS2EG821YK ECEC2EG821YK 100 1000 35 45 2.20 0.20 ECOS2EG102YK ECEC2EG102YK 100 1200 35 50 2.30 0.20 ECOS2EG122ZK ECEC2EG122ZK 100 Endurance : 105°C 2000 h Terminal Pitch : 10mm When capacitors of φ35x45L and φ35x50L are mounted on PWB, reinforce them with mounting clamp or adhesives.(Avoid using adhesives including halogenated compositions.) Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consulation without fail. Mar. 2005 – EE175 –