M54HC4051/52/53 M74HC4051/52/53 ANALOG MULTIPLEXER/DEMULTIPLEXER: SINGLE 8 CHANNEL, DUAL 4 CHANNEL, TRIPLE 2 CHANNEL . . . .. .. . . . . LOW POWER DISSIPATION o ICC = 4 µA (MAX.) AT TA = 25 C LOGIC LEVEL TRANSLATION TO ENABLE 5V LOGIC SIGNAL TO COMMUNICATE WITH ±5V ANALOG SIGNAL LOW ”ON” RESISTANCE: 70Ω TYP. (VCC - VEE = 4.5 V) 50Ω TYP. (VCC - VEE = 9 V) WIDE ANALOG INPUT VOLTAGE RANGE: ±6V FAST SWITCHING: tpd = 15 ns (TYP.) AT TA = 25 oC LOW CROSSTALK BETWEEN SWITCHES HIGH ON/OFF OUTPUT VOLTAGE RATIO WIDE OPERATING VOLTAGE RANGE (VCC - VEE) = 2V TO 12V LOW SINE WAVE DISTORTION 0.02% AT VCC - VEE = 9V HIGH NOISE IMMUNITY VNIH = VNIL = 28 % VCC (MIN.) PIN AND FUNCTION COMPATIBLE WITH HCC/HCF4051/4052/4053B DESCRIPTION These devices are analog multiplexer demultiplexers in high speed silicon gate C 2MOS technology and they are pin compatible with the equivalent metal gate CMOS ”4000B” series. These analog switches are bidirectional and digitally B1R (Plastic Package) F1R (Ceramic Package) M1R (Micro Package) C1R (Chip Carrier) ORDER CODES : M54HCXXXXF1R M74HCXXXXM1R M74HCXXXXB1R M74HCXXXXC1R controlled. A built-in level shifting is included to allow them an input range of up to ± 6V (peak) for an analog signal with digital control signal of 0 to 6V. VEE supply pin is provided for analog input signals. They have an inhibit (INH) input terminal to disable all the switches when high. For operation as a digital multiplexer/demultiplexer, VEE is connected to GND. PIN CONNECTION (top view) HC4051 October 1993 HC4052 HC4053 1/15 M54/M74HC4051/4052/4053 DESCRIPTION The HC4051 is a single 8 channel multiplexer demultiplexer having three binary control inputs A, B and C to select 1 of 8 to be turned on, and connected to the output. The HC4052 has a pair of four channel multiplexer demultiplexer having two control inputs A and B that select one of four channels of the two sections. The HC4053 is a triple two channel multiplexer demultiplexer having three separate digital control inputs A, B and C to select independently one of a pair of channles. CHIP CARRIER HC4051 HC4052 TRUTH TABLE (HC4051) INPUT STATES INHIBIT C B A HC4053 TRUTH TABLE (HC4052) ”ON” CHANNEL INPUT STATES INHIBIT B ”ON” CHANNELS L L L L 0 L L L 0X, 0Y L L L L L L L H H H L H 1 2 3 L L L L H H H L H 1X, 1Y 2X, 2Y 3X, 3Y L H L L 4 H X X NONE L L H H L H H L 5 6 X: DON’T CARE L H H H 7 TRUTH TABLE (HC4053) H X X X NONE X: DON’T CARE INPUT STATES ”ON” CHANNELS INHIBIT L A or B or C L L H ay or by or cy H X NONE X: DON’T CARE 2/15 A ax or bx or cx M54/M74HC4051/4052/4053 IEC LOGIC SYMBOLS HC4051 HC4052 PIN DESCRIPTION (HC4051) PIN No 3 6 7 11, 10, 9 13, 14, 15, 12, 1, 5, 2, 4 8 16 SYMBOL COM OUT/IN INH VEE A, B, C 0 TO 7 GND VCC NAME AND FUNCTION Common Output/input INHIBIT Input Negative Supply Voltage Select Inputs Independent Input/Outputs Ground (0V) Positive Supply Voltage PIN DESCRIPTION (HC4053) PIN No 2, 1 5, 3 6 7 11, 10, 9 12, 13 14, 15, 4 8 16 SYMBOL bx, by cx, cy INH VEE A, B, C ax, ay ax TO cy GND VCC HC4053 PIN DESCRIPTION (HC4052) PIN No 1, 5, 2, 4 6 7 10, 9 12, 14, 15, 11 3 13 8 16 SYMBOL 0Y TO 3Y INH V EE A, B 0X TO 3X COM Y OUT/IN COM X OUT/IN GND VCC NAME AND FUNCTION Independent Input/Outputs INHIBIT Input Negative Supply Voltage Select Inputs Independent Input/Outputs Common X Output/input Common Y Output/input Ground (0V) Positive Supply Voltage NAME AND FUNCTION Independent Input/Outputs Independent Input/Outputs INHIBIT Input Negative Supply Voltage Select Inputs Independent Input/Outputs Common Output/input Ground (0V) Positive Supply Voltage 3/15 M54/M74HC4051/4052/4053 FUNCTIONAL DIAGRAM HC4051 HC4052 4/15 M54/M74HC4051/4052/4053 FUNCTIONAL DIAGRAM HC4053 ABSOLUTE MAXIMUM RATINGS Symbol Parameter VCC VCC - VEE Supply Voltage Range Supply Voltage Range VIN Control Input Voltage VI/O ICK Switch I/O Voltage Control Input Diode Current IIOK Value Unit -0.5 to +7 -0.5 to 13 V V -0.5 to VCC + 0.5 V VEE - 0.5 to VCC + 0.5 ± 20 V mA I/O Diode Current ± 20 mA ICC Switch Through Current DC VCC or Ground Current ± 25 ± 50 mA mA PD Power Dissipation 500 (*) mW Tstg TL Storage Temperature Lead Temperature (10 sec) IT -65 to +150 300 o o C C Absolute Maximum Ratings are those values beyond which damage tothe device may occur. Functional operation under these conditions is not implied. (*) 500 mW: ≅ 65 oC derate to 300 mW by 10mW/oC: 65 oC to 85 oC 5/15 M54/M74HC4051/4052/4053 RECOMMENDED OPERATING CONDITIONS Symbol Parameter VCC VEE Supply Voltage Supply Voltage VCC - VEE Supply Voltage VIN VI/O Input Voltage Input/Output Voltage Top Operating Temperature: tr, tf Input Rise and Fall Time M54HC Series M74HC Series Value Unit 2 to 6 -6 to 0 V V 2 to 12 V 0 to VCC VEE to V CC V V -55 to +125 -40 to +85 o VCC = 2 V 0 to 1000 VCC = 4.5 V 0 to 500 VCC = 6 V 0 to 400 o C C ns DC SPECIFICATIONS Test Conditions Symbol VIHC V ILC RON ∆RON IOFF IIZ Parameter VEE (V) Min. Typ. Max. Value -40 to 85 oC -55 to 125 oC Unit 74HC 54HC Min. Max. Min. Max. High Level Control Input Voltage 2.0 1.5 1.5 1.5 4.5 3.15 3.15 3.15 6.0 4.2 Low Level Control Input Voltage 2.0 4.5 1.8 1.8 1.8 ON Resistance 4.5 GND VIN = VIHC or VILC 4.5 -4.5 VI/O = VCC to VEE II/O ≤ 2 mA 6.0 -6.0 85 55 180 120 225 150 270 180 50 100 125 150 2.0 GND VIN = VIHC or VILC 4.5 GND VI/O = VCC or VEE II/O ≤ 2 mA 4.5 -4.5 150 70 150 190 230 50 100 125 150 6.0 -6.0 4.5 GND 45 10 80 30 100 35 120 45 4.5 5 12 15 18 5 10 12 15 ±0.06 ±0.1 ±0.6 ±1 ±1.2 ±2 VOS = VCC or GND V = V IN IHC or VILC -6.0 ±0.06 ±0.6 ±1.2 ±0.1 ±1 ±2 µA VIN = VCC or GND ±0.1 ±0.1 ±1 µA 4 40 80 µA 8 80 160 Difference of ON Resistance Between Switches 6.0 6.0 VIN = VIHC or VILC -4.5 VI/O = VCC or VEE -6.0 II/O ≤ 2 mA 6.0 GND Switch Input Leakage Current (SWITCH ON, OUTPUT OPEN) 6.0 GND Control Input Current ICC Quiescent Supply Current 4.2 0.5 1.35 Input/Output Leakage Current (SWITCH OFF) IIN 6/15 VCC (V) TA = 25 oC 54HC and 74HC 6.0 6.0 VOS = VCC or GND -6.0 V IS = GND or VCC VIN = VILC or VIHC 6.0 GND 6.0 GND 6.0 -6.0 VIN = VCC or GND V 4.2 0.5 1.35 0.5 1.35 V Ω Ω µA M54/M74HC4051/4052/4053 AC ELECTRICAL CHARACTERISTICS (C L = 50 pF, Input t r = tf = 6 ns) Test Conditions Symbol Parameter ΦI/O Phase Difference Between Input and Output tPZL tPZH tPZL tPZH Output Enable Time (for 4051/4052) Output Enable Time (for 4053) tPLZ tPHZ Output Disable Time (for 4051/4052) tPLZ tPHZ Output Disable Time (for 4053) VCC (V) Value TA = 25 oC 54HC and 74HC Min. Typ. Max. VEE (V) -40 to 85 oC -55 to 125 oC 74HC 54HC Min. Max. Min. Max. 2.0 GND 25 60 75 90 4.5 GND 6.0 GND 6 5 12 10 15 13 18 15 4.5 4 -4.5 2.0 GND RL = 1KΩ 64 225 280 340 4.5 GND 18 45 56 68 6.0 GND 15 38 48 58 4.5 -4.5 2.0 GND RL = 1KΩ 18 50 225 280 340 4.5 GND 14 45 56 68 6.0 GND 4.5 -4.5 12 14 38 48 58 2.0 GND RL = 1KΩ 100 250 315 375 4.5 GND 6.0 GND 33 28 50 43 63 54 7 64 4.5 29 -4.5 Unit ns ns ns ns 2.0 GND RL = 1KΩ 4.5 GND 95 30 225 45 280 56 340 68 6.0 GND 26 38 48 58 4.5 26 5 10 10 10 pF -4.5 ns CIN Input Capacitance CI/O Common Terminal Capacitance 5.0 -5.0 HC4051 HC4052 HC4053 36 19 11 70 40 20 70 40 20 70 40 20 pF Switch Terminal Capacitance 5.0 -5.0 HC4051 HC4052 HC4053 7 7 7 15 15 15 15 15 15 15 15 15 pF Feed Through Capacitance 5.0 -5.0 HC4051 HC4052 HC4053 0.95 0.85 0.75 2 2 2 2 2 2 2 2 2 pF HC4051 HC4052 HC4053 70 71 67 CI/O CIOS CPD (*) Power Dissipation Capacitance 5.0 GND pF (*) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD •VCC •fIN + ICC 7/15 M54/M74HC4051/4052/4053 ANALOG SWITCH CHARACTERISTICS (GND = 0 V T A = 25 o C) Test Conditions Symbol Parameter Sine Wave Distortion fMAX Frequency Response (Switch ON) VCC (V) 2.25 VEE VIN (V) (Vp-p) 2.25 4 4.5 -4.5 6.0 -6.0 Feedthrough Attenuation (Switch OFF) Crosstalk (Control Input to Signal Output) Crosstalk (Between Any Switches) Unit Typ. fIN = 1 KHz -6.0 2.25 -2.25 4.5 -4.5 6.0 -6.0 2.25 -2.25 4.5 -4.5 6.0 -6.0 2.25 -2.25 4.5 -4.5 6.0 -6.0 CL = 50 pF 0.025 0.020 ALL (*) 45 70 95 ALL (*) 190 HC4051 (**) HC4052 (**) HC4053 (**) 70 110 150 ALL (*) HC4051 (**) HC4052 (**) HC4053 (**) 200 85 140 190 -50 Adjust RL at set up so that IS = 0A CL = 50 pF RL = 600 Ω fIN = 1 MHz square wave Adjust VIN to Obtain 0 dBm at Input RL = 600 Ω CL = 50 pF fIN = 1 MHz sine wave % 0.018 120 HC4051 (**) HC4052 (**) HC4053 (**) VIN is centered at (VCC - VEE)/2. Adjust input for 0 dBm RL = 600 Ω CL = 50 pF fIN = 1 KHz sine wave (*): Input COMMON Terminal, and measured at SWITCH Terminal. (**): Input SWITCH Terminal, and measured at COMMON Terminal. NOTE: These characteristics are determined by design of devices. 8/15 RL = 10 KΩ 8 11 Adjust fIN voltage to Obtain 0 dBm at VOS. Increase fIN Frequency until dB Meter 2.25 -2.25 Reads -3dB RL = 50 Ω CL = 10 pF fIN = 1 KHz sine wave 4.5 -4.5 6.0 Value -50 MHz dB -50 60 140 mV 200 -50 -50 -50 dB M54/M74HC4051/4052/4053 SWITCHING CHARACTERISTICS TEST CIRCUIT tPLZ, tPHZ, tPZL, tPZH. CROSSTALK (control to output) BANDWIDTH AND FEEDTHROUGH ATTENUATION CROSSTALK BETWEEN ANY TWO SWITCHES GND (VSS) CI–O CI/O GND (VSS) 9/15 M54/M74HC4051/4052/4053 SWITCHING CHARACTERISTICS TEST WAVEFORM CHANNEL RESISTANCE (RON) 10/15 I CC (Opr.) M54/M74HC4051/4052/4053 Plastic DIP16 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.51 B 0.77 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.030 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 17.78 0.700 F 7.1 0.280 I 5.1 0.201 L Z 3.3 0.130 1.27 0.050 P001C 11/15 M54/M74HC4051/4052/4053 Ceramic DIP16/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7 0.276 D E 3.3 0.130 0.38 e3 0.015 17.78 0.700 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053D 12/15 M54/M74HC4051/4052/4053 SO16 (Narrow) MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.068 0.2 a2 MAX. 0.004 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 9.8 E 5.8 10 0.385 6.2 0.228 0.393 0.244 e 1.27 0.050 e3 8.89 0.350 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.62 0.024 8° (max.) P013H 13/15 M54/M74HC4051/4052/4053 PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 14/15 M54/M74HC4051/4052/4053 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 15/15