GB-483 SERIES Cylindrical Type Inverted Cone LED Lamps (3mm) DESCRIPTION: PACKAGE DIMENSIONS The 483 series is cylindrical type in 3mm diameter with inverted cone top resulting in a very wide angle effect. This series is most suitable for panel display. The semi-conductor materials used are: GaP for (483VGC/VGT) GaAsP/GaP for (483VYC/VYT) AlGaInP for (483UIC) GaAlAs for (483UR1C, 483HR3C) Unit: mm Tol: +/- 0.2mm 3.8 φ3.0 o 3.8 ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Reverse Voltage Reverse Current (Vr =5V) Operating Temperature Range Storage Temperature Range Lead Soldering Temperature (1.6mm (1/16)From Body) 1.0 Max. 5 Volt 100µA -40oC To 85oC -40oC To 100oC 260oC For 5 Seconds 115 o 1.0 25.4 Min. 0.5 1.0 NOTES : 1. All dimensions are in millimeters. 2. Lead spacing is measured where the leads emerge from the package. 3. Protuded resin under flange is 1.5 mm (0.059") Max. 4. Specifications are subject to change without notice. 2.54 o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Part No. Emitted Color Lens Color Peak Wavelength λp (nm) GB-483VGT Super Green Green Trans. GB-483VYT Super Yellow GB-483HR3C View Angle 2θ1/2(Deg) Vf (v) Min Max Rec. If (mA). Iv (mcd) Min Typ. 565 1.7 2.6 10-20 8.6 1.0 160 Yellow Trans. 585 1.7 2.6 10-20 7.7 9.0 160 Super Red Water Clear 640 1.5 2.6 10-20 13.0 15.0 160 GB-483UR1C Super Red Water Clear 660 1.5 2.6 10-20 34.0 40.0 160 GB-483UIC Ultra Red Water Clear 640 1.7 2.6 10-20 68.0 80.0 160 GB-483VGC Super Green Water Clear 565 1.7 2.6 10-20 8.6 1.0 160 GB-483VYC Super Yellow Water Clear 585 1.7 2.6 10-20 7.7 9.0 160 TESTING CONDITION FOR EACH PARAMETER : PARAMETER: REVERSE VOLTAGE REVERSE CURRENT FORWARD VOLTAGE LUMINOUS INTENSITY VIEWING ANGLE RECOMMENDED OPERATING CURRENT SYMBOL Vr Ir Vf Iv 2θ1/2 If (Rec) 0o UNIT VOLT µA VOLT MCD DEGREE mA TEST CONDITION Vr = 5.0 Volt If = 20mA If = 20mA If = 20mA 10o 20o 30o C,T 40o 1.0 50o 0.9 60o 70o 0.8 80o 90o 0.7 0.5 0.3 0.1 0.2 0.4 SPATIAL DISTRIBUTION 0.6