IRFR9024, IRFU9024, SiHFR9024, SiHFU9024 Power MOSFET FEATURES PRODUCT SUMMARY VDS (V) - 60 RDS(on) (Ω) VGS = - 10 V 0.28 Qg (Max.) (nC) 19 Qgs (nC) 5.4 Qgd (nC) 11 Configuration Single S • • • • • • • • Dynamic dV/dt Rating Repetitive Avalanche Rated Surface Mount (IRFR9024/SiHFR9024) Straight Lead (IRFU9024/SiHFU9024) Available in Tape and Reel P-Channel Fast Switching Lead (Pb)-free Available Available RoHS* COMPLIANT DESCRIPTION DPAK (TO-252) IPAK (TO-251) G D P-Channel MOSFET Third generation Power MOSFETs from Vishay provide the designer with the best combination of fast switching, ruggedized device design, low on-resistance and cost-effictiveness. The DPAK is designed for surface mounting using vapor phase, infrared, or wave soldering techniques. The straight lead version (IRFU/SiHFU series) is for through-hole mounting applications. Power dissipation levels up to 1.5 W are possible in typical surcace mount applications. ORDERING INFORMATION Package Lead (Pb)-free SnPb DPAK (TO-252) DPAK (TO-252) DPAK (TO-252) DPAK (TO-252) IPAK (TO-251) IRFR9024PbF IRFR9024TRPbFa IRFR9024TRLPbFa IRFR9024TRRPbFa IRFU9024PbF SiHFR9024-E3 SiHFR9024T-E3a SiHFR9024TL-E3a SiHFR9024TR-E3a SiHFU9024-E3 IRFR9024 IRFR9024TRa IRFR9024TRLa - IRFU9024 SiHFR9024 SiHFR9024Ta SiHFR9024TLa - SiHFU9024 Note a. See device orientation. ABSOLUTE MAXIMUM RATINGS TC = 25 °C, unless otherwise noted PARAMETER Drain-Source Voltage Gate-Source Voltage Continuous Drain Current VGS at - 10 V TC = 25 °C TC = 100 °C SYMBOL LIMIT VDS VGS - 60 ± 20 - 8.8 - 5.6 - 35 0.33 0.020 300 - 8.8 5.0 42 2.5 - 4.5 - 55 to + 150 260d ID IDM Pulsed Drain Currenta Linear Derating Factor Linear Derating Factor (PCB Mount)e Single Pulse Avalanche Energyb EAS IAR Repetitive Avalanche Currenta Repetitive Avalanche Energya EAR Maximum Power Dissipation TC = 25 °C PD TA = 25 °C Maximum Power Dissipation (PCB Mount)e c dV/dt Peak Diode Recovery dV/dt Operating Junction and Storage Temperature Range TJ, Tstg Soldering Recommendations (Peak Temperature) for 10 s Notes a. Repetitive rating; pulse width limited by maximum junction temperature (see fig. 11). b. VDD = - 25 V, starting TJ = 25 °C, L = 4.5 mH, RG = 25 Ω, IAS = - 8.8 A (see fig. 12). c. ISD ≤ - 11 A, dI/dt ≤ 140 A/µs, VDD ≤ VDS, TJ ≤ 150 °C. d. 1.6 mm from case. e. When mounted on 1" square PCB (FR-4 or G-10 material). UNIT V A W/°C mJ A mJ W V/ns °C www.kersemi.com 1 IRFR9024, IRFU9024, SiHFR9024, THERMAL RESISTANCE RATINGS SYMBOL MIN. TYP. MAX. Maximum Junction-to-Ambient PARAMETER RthJA - - 110 Maximum Junction-to-Ambient (PCB Mount)a RthJA - - 50 Maximum Junction-to-Case (Drain) RthJC - - 3.0 UNIT °C/W Note a. When mounted on 1" square PCB (FR-4 or G-10 material). SPECIFICATIONS TJ = 25 °C, unless otherwise noted PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. UNIT Static Drain-Source Breakdown Voltage VDS Temperature Coefficient Gate-Source Threshold Voltage Gate-Source Leakage Zero Gate Voltage Drain Current Drain-Source On-State Resistance Forward Transconductance VDS VGS = 0 V, ID = 250 µA - 60 - - V ΔVDS/TJ Reference to 25 °C, ID = 1 mA - - 0.063 - V/°C VGS(th) VDS = VGS, ID = 250 µA - 2.0 - - 4.0 V nA IGSS IDSS RDS(on) gfs VGS = ± 20 V - - ± 100 VDS = - 60 V, VGS = 0 V - - - 100 VDS = - 48 V, VGS = 0 V, TJ = 125 °C - - - 500 - - 0.28 Ω VDS = - 25 V, ID = - 5.3 A 2.9 - - S VGS = 0 V, VDS = - 25 V, f = 1.0 MHz - 570 - - 360 - - 65 - - - 19 - - 5.4 ID = - 5.3 Ab VGS = - 10 V µA Dynamic Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss Total Gate Charge Qg Gate-Source Charge Qgs VGS = - 10 V ID = - 11 A, VDS = - 48 V, see fig. 6 and 13b pF nC Gate-Drain Charge Qgd - - 11 Turn-On Delay Time td(on) - 13 - - 68 - - 15 - - 29 - - 4.5 - - 7.5 - - - - 8.8 S - - - 35 TJ = 25 °C, IS = - 8.8 A, VGS = 0 Vb - - - 6.3 V - 100 200 ns - 0.32 0.64 µC Rise Time Turn-Off Delay Time Fall Time tr td(off) VDD = - 30 V, ID = - 11 A, RG = 18 Ω, RD = 2.5 Ω, see fig. 10b tf Internal Drain Inductance LD Internal Source Inductance LS Between lead, 6 mm (0.25") from package and center of die contact D ns nH G S Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current IS Pulsed Diode Forward Currenta ISM Body Diode Voltage VSD Body Diode Reverse Recovery Time trr Body Diode Reverse Recovery Charge Qrr Forward Turn-On Time ton www.kersemi.com 2 MOSFET symbol showing the integral reverse p - n junction diode D A G TJ = 25 °C, IF = - 11 A, dI/dt = 100 A/µsb Intrinsic turn-on time is negligible (turn-on is dominated by LS and LD) IRFR9024, IRFU9024, SiHFR9024, SiHFU9024 TYPICAL CHARACTERISTICS 25 °C, unless otherwise noted Fig. 1 - Typical Output Characteristics, TC = 25 °C Fig. 2 -Typical Output Characteristics, TC = 150 °C Fig. 3 - Typical Transfer Characteristics Fig. 4 - Normalized On-Resistance vs. Temperature www.kersemi.com 3 IRFR9024, IRFU9024, SiHFR9024, Fig. 5 - Typical Capacitance vs. Drain-to-Source Voltage Fig. 6 - Typical Gate Charge vs. Gate-to-Source Voltage www.kersemi.com 4 Fig. 7 - Typical Source-Drain Diode Forward Voltage Fig. 8 - Maximum Safe Operating Area IRFR9024, IRFU9024, SiHFR9024, SiHFU9024 RD VDS VGS D.U.T. RG + - VDD - 10 V Pulse width ≤ 1 µs Duty factor ≤ 0.1 % Fig. 10a - Switching Time Test Circuit td(on) tr td(off) tf VGS 10 % 90 % VDS Fig. 9 - Maximum Drain Current vs. Case Temperature Fig. 10b - Switching Time Waveforms Fig. 11 - Maximum Effective Transient Thermal Impedance, Junction-to-Case www.kersemi.com 5 IRFR9024, IRFU9024, SiHFR9024, L Vary tp to obtain required IAS IAS VDS D.U.T. RG VDS + V DD VDD IAS tp - 10 V 0.01 Ω tp VDS Fig. 12a - Unclamped Inductive Test Circuit Fig. 12b - Unclamped Inductive Waveforms Fig. 12c - Maximum Avalanche Energy vs. Drain Current Current regulator Same type as D.U.T. 50 kΩ QG - 10 V 12 V 0.2 µF 0.3 µF QGS - QGD D.U.T. VG + VDS VGS - 3 mA Charge IG ID Current sampling resistors Fig. 13a - Basic Gate Charge Waveform www.kersemi.com 6 Fig. 13b - Gate Charge Test Circuit IRFR9024, IRFU9024, SiHFR9024, SiHFU9024 Peak Diode Recovery dV/dt Test Circuit D.U.T. + Circuit layout considerations • Low stray inductance • Ground plane • Low leakage inductance current transformer + - - RG + • dV/dt controlled by RG • ISD controlled by duty factor "D" • D.U.T. - device under test + - VDD Compliment N-Channel of D.U.T. for driver Driver gate drive P.W. Period D= P.W. Period VGS = - 10 V* D.U.T. ISD waveform Reverse recovery current Body diode forward current dI/dt D.U.T. VDS waveform Diode recovery dV/dt Re-applied voltage VDD Body diode forward drop Inductor current Ripple ≤ 5 % * ISD VGS = - 5 V for logic level and - 3 V drive devices Fig. 14 - For P-Channel www.kersemi.com 7