Taiyo Yuden AMK042BJ104C-W Please read this notice before using the taiyo yuden product Datasheet

Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products.
REMINDERS
■ Product information in this catalog is as of October 2013. All of the contents specified herein are subject to change
without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products.
Please note that TAIYO YUDEN CO., LTD. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification.
■ Please contact TAIYO YUDEN CO., LTD. for further details of product specifications as the individual specification
is available.
■ Please conduct validation and verification of products in actual condition of mounting and operating environment
before commercial shipment of the equipment.
■ All electronic components or functional modules listed in this catalog are developed, designed and intended for
use in general electronics equipment.(for AV, office automation, household, office supply, information service,
telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any
equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal,
disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have
direct influence to harm or injure a human body, please contact TAIYO YUDEN CO., LTD. for more detail in advance.
Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required.
In addition, even electronic components or functional modules that are used for the general electronic equipment,
if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to
install a protective circuit is strongly recommended at customer's design stage.
■ The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ).
It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel.
■ Please note that TAIYO YUDEN CO., LTD. shall have no responsibility for any controversies or disputes that may
occur in connection with a third party's intellectual property rights and other related rights arising from your usage
of products in this catalog. TAIYO YUDEN CO., LTD. grants no license for such rights.
■ Caution for export
Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations.
Should you have any question or inquiry on this matter, please contact our sales staff.
14
MULTILAYER CERAMIC CAPACITORS
WAVE
MULTILAYER CERAMIC CAPACITORS
REFLOW
■PARTS NUMBER
J M K
① ② ③
3
1 6
④
CERAMIC CAPACITORS
①Rated voltage
Code
P
A
J
L
E
T
G
U
H
Q
S
②Series name
Code
M
V
W
△
⑤
B
J
1
⑥
0 6
⑦
M L － T △
⑧ ⑨ ⑩ ⑪ ⑫
③End termination
Code
K
S
Rated voltage［VDC］
2.5
4
6.3
10
16
25
35
50
100
250
630
A
Dimensions
（L×W）［mm］
042
0.4 × 0.2
063
0.6 × 0.3
1.0 × 0.5
105
0.52× 1.0 ※
1.6 × 0.8
107
0.8 × 1.6 ※
2.0 × 1.25
212
1.25× 2.0 ※
316
3.2 × 1.6
325
3.2 × 2.5
432
4.5 × 3.2
Note : ※LW reverse type（□WK） only
Type
L［mm］
Standard
W［mm］
Standard
0.6±0.05
1.0±0.10
1.6＋0.15/－0.05
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
212
2.0＋0.15/－0.05
1.25＋0.15/－0.05
316
3.2±0.20
1.6±0.20
325
105
3.2±0.30
1.0＋0.15/－0.05
2.5±0.30
0.5＋0.15/－0.05
107
1.6＋0.20/－0
0.8＋0.20/－0
212
2.0＋0.20/－0
1.25＋0.20/－0
316
105
3.2±0.30
1.6±0.30
1.0＋0.20/－0
0.5＋0.20/－0
Note: P.6 Standard external dimensions
⑥Temperature characteristics code
■High dielectric type（Excluding Super low distortion multilayer ceramic capacitor（CFCAPTM））
Applicable
Temperature
Code
Ref. Temp.［℃］
Capacitance change
standard
range［℃］
JIS
B
－25～＋ 85
20
±10％
EIA
X5R
－55～＋ 85
25
±15％
B7
EIA
X7R
－55～＋125
25
±15％
C6
EIA
X6S
－55～＋105
25
±22％
C7
EIA
X7S
－55～＋125
25
±22％
LD(※)
EIA
X5R
－55～＋ 85
25
±15％
BJ
JIS
F
－25～＋ 85
20
EIA
Y5V
－30～＋ 85
25
Note : ※.LD Low distortion high value multilayer ceramic capacitor
△F
EIA（inch）
01005
0201
0402
0204
0603
0306
0805
0508
1206
1210
1812
T［mm］
Standard
0.3±0.05
0.5±0.10
0.8＋0.15/－0.05
0.45±0.05
0.85±0.10
1.25＋0.15/－0.05
0.85±0.10
1.6±0.20
2.5±0.30
0.5＋0.15/－0.05
0.45±0.05
0.8＋0.20/－0
0.85±0.10
1.25＋0.20/－0
1.6±0.30
0.5＋0.20/－0
△= Blank space
B
C
End termination
Plated
Cu Internal Electrodes
④Dimension（L×W）
Series name
Multilayer ceramic capacitor
Multilayer ceramic capacitor for high frequency
LW reverse type multilayer capacitor
⑤Dimension tolerance
Code
Type
△
ALL
063
105
107
△＝Blank space
＋30/－80％
＋22/－82％
Capacitance
Tolerance
tolerance
code
±10％
K
±20％
M
±10％
K
±20％
M
±10％
K
±20％
M
±10％
K
±20％
M
±10％
K
±20％
M
±10％
K
±20％
M
＋80/－20％
Z
＋80/－20％
Z
△= Blank space
c_mlcc_e-E02R02
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
4
14
■Temperature compensating type
Applicable
Code
standard
CG
EIA
C0G
JIS
CH
CH
CK
UJ
UK
SL
Ref. Temp.［℃］
Capacitance change
－55～＋125
25
0±60ppm/℃
20
－55～＋125
EIA
C0H
JIS
EIA
JIS
EIA
JIS
CJ
C0J
CK
C0J
UJ
EIA
U2J
JIS
EIA
JIS
UK
U2K
SL
0±60ppm/℃
25
－55～＋125
－55～＋125
－55～＋125
－55～＋125
－55～＋125
－55～＋125
20
25
20
25
20
25
20
25
20
⑥Series code
（Super low distortion multilayer ceramic capacitor（CFCAPTM）only）
Code
Series code
SD
Standard
⑦Nominal capacitance
Code
（example）
0R5
010
100
101
102
103
104
105
106
107
Note : R＝Decimal point
⑧Capacitance tolerance
Code
B
C
D
F
G
J
K
M
Z
Nominal capacitance
0.5pF
1pF
10pF
100pF
1,000pF
10,000pF
0.1μF
1.0μF
10μF
100μF
0±120ppm/℃
Tolerance
code
B
C
D
F
J
B
C
D
F
J
K
±0.25pF
C
0±250ppm/℃
±0.25pF
C
－750±120ppm/℃
±0.25pF
±0.5pF
±5％
C
D
J
－750±250ppm/℃
±0.5pF
C
+350～－1000ppm/℃
±5％
J
⑨Thickness
Code
C
D
P
T
K
V
W
A
D
F
G
L
N
Y
M
Thickness［mm］
0.2
0.3
0.45
0.5
0.8
0.85(212type or more)
1.15
1.25
1.6
1.9
2.0 max
2.5
⑩Special code
Code
－
Capacitance tolerance
±0.1pF
±0.25pF
±0.5pF
±1pF
±2％
±5％
±10％
±20％
＋80/－20％
Capacitance
tolerance
±0.1pF
±0.25pF
±0.5pF
±1pF
±5％
±0.1pF
±0.25pF
±0.5pF
±1pF
±5％
±10％
CERAMIC CAPACITORS
CJ
Temperature
range［℃］
⑪Packaging
Code
F
T
Special code
Standard
Packaging
φ178mm Taping （2mm pitch）
φ178mm Taping （4mm pitch）
φ178mm Taping （4mm pitch, 1000 pcs/reel）
325 type（Thickness code M）
φ178mm Taping（1mm pitch）042type only
P
W
⑫Internal code
Code
△
Internal code
Standard
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
5
■STANDARD EXTERNAL DIMENSIONS
Type( EIA )
CERAMIC CAPACITORS
e
※ LW reverse type
Dimension [mm]
T
Ｌ
Ｗ
□MK042（01005）
0.4±0.02
0.2±0.02
0.2±0.02
□VS042（01005）
0.4±0.02
0.2±0.02
0.2±0.02
□MK063（0201）
0.6±0.03
0.3±0.03
0.3±0.03
□MK105（0402）
1.0±0.05
0.5±0.05
□VK105（0402）
□WK105（0204）※
1.0±0.05
0.52±0.05
0.5±0.05
1.0±0.05
□MK107（0603）
1.6±0.10
0.8±0.10
□WK107（0306）※
0.8±0.10
1.6±0.10
□MK212（0805）
2.0±0.10
1.25±0.10
□WK212（0508）※
1.25±0.15
2.0±0.15
□MK316（1206）
3.2±0.15
1.6±0.15
□MK325（1210）
3.2±0.30
2.5±0.20
□MK432（1812）
4.5±0.40
Note : ※. LW reverse type, *1.Thickness code
3.2±0.30
0.2±0.02
0.3±0.03
0.5±0.05
0.5±0.05
0.3±0.05
0.45±0.05
0.8±0.10
0.5±0.05
0.45±0.05
0.85±0.10
1.25±0.10
0.85±0.1
0.85±0.10
1.15±0.10
1.25±0.10
1.6±0.20
0.85±0.10
1.15±0.10
1.9±0.20
1.9+0.1/-0.2
2.5±0.20
2.5±0.20
*1
C
D
C
P
T
C
P
V
W
P
K
A
Ｖ
K
D
G
Ｄ
D
Ｆ
G
L
D
F
N
Y
M
M
e
0.1±0.03
0.1±0.03
0.15±0.05
0.25±0.10
0.25±0.10
0.18±0.08
0.35±0.25
0.25±0.15
0.5±0.25
0.3±0.2
0.5+0.35/-0.25
0.6±0.3
0.9±0.6
■STANDARD QUANTITY
Type
EIA（inch）
Dimension
［ｍｍ］
042
01005
0.2
063
0201
0.3
105
0402
0.5
0204 ※
107
0603
0306 ※
212
0805
0508 ※
316
325
0.2
0.3
1206
1210
432
1812
Note : ※.LW Reverse type（□WK）
0.30
0.45
0.8
0.50
0.45
0.85
1.25
0.85
0.85
1.15
1.25
1.6
0.85
1.15
1.9
2.0 max
2.5
2.5
Code
C
D
P
T
C
P
V
W
P
K
A
V
K
D
G
D
D
F
G
L
D
F
N
Y
M
M
Standard quantity［pcs］
Paper tape
Embossed tape
－
40000
15000
－
20000
15000
－
－
10000
－
4000
－
－
4000
4000
－
－
4000
4000
3000
－
－
－
3000
－
2000
－
2000
－
－
500（T），1000（P）
500
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
6
14
■PARTS NUMBER
・ All the Multilayer Ceramic Capacitors of Catalog Lineup are Compliance RoHS.
・ Capacitance tolerance code is applied to [] of part number.
Note)
*1 We may provide X7R/X7S for some items according to the individual specification.
*2 The exchange of individual specification is necessary depending on the application and circuit condition. Please contact TAIYO YUDEN sales channels.
*3 The size standard should look at ④Dimension, ⑤Dimension tolerance, and ⑨Thickness, and P.6 Standard external dimensions.
Multilayer Ceramic Capacitors (High dielectric type)
●042TYPE
【Temperature Characteristic BJ : B/X5R】 0.2mm thickness（C）
Part number 1
Part number 2
10
6.3
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
4
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
1500
2200
3300
4700
6800
10000
22000
47000
47000
0.1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
5
5
5
5
5
5
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
100
150
220
330
470
680
1000
100
150
220
330
470
680
1000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
5
5
5
5
5
5
5
5
5
5
5
5
5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
1500
2200
3300
4700
6800
10000
22000
1500
2200
3300
4700
6800
10000
22000
33000
47000
68000
0.1
0.22
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
5
5
5
5
5
5
5
5
5
5
5
7.5
5
5
5
5
5
5
7.5
7.5
7.5
10
10
10
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Thickness
[mm]
*3
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
LMK042 BJ101[]C-W
LMK042 BJ151[]C-W
LMK042 BJ221[]C-W
LMK042 BJ331[]C-W
LMK042 BJ471[]C-W
LMK042 BJ681[]C-W
LMK042 BJ102[]C-W
LMK042 BJ152[]C-W
LMK042 BJ222[]C-W
LMK042 BJ332[]C-W
LMK042 BJ472[]C-W
LMK042 BJ682[]C-W
LMK042 BJ103[]C-W
JMK042 BJ152[]C-W
JMK042 BJ222[]C-W
JMK042 BJ332[]C-W
JMK042 BJ472[]C-W
JMK042 BJ682[]C-W
JMK042 BJ103[]C-W
JMK042 BJ223[]C-W
JMK042 BJ473[]C-W
AMK042 BJ473[]C-W
AMK042 BJ104[]C-W
Rated voltage [V]
【Temperature Characteristic B7 : X7R】 0.2mm thickness（C）
Part number 1
Part number 2
EMK042 B7101[]C-W
EMK042 B7151[]C-W
EMK042 B7221[]C-W
EMK042 B7331[]C-W
EMK042 B7471[]C-W
EMK042 B7681[]C-W
EMK042 B7102[]C-W
LMK042 B7101[]C-W
LMK042 B7151[]C-W
LMK042 B7221[]C-W
LMK042 B7331[]C-W
LMK042 B7471[]C-W
LMK042 B7681[]C-W
LMK042 B7102[]C-W
Rated voltage [V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
16
10
p
p
p
p
p
p
p
p
p
p
p
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
200
200
200
*3
Thickness
[mm]
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
●063TYPE
【Temperature Characteristic BJ : B/X5R】 0.3mm thickness（P）
Part number 1
UMK063 BJ101[]P-F
UMK063 BJ151[]P-F
UMK063 BJ221[]P-F
UMK063 BJ331[]P-F
UMK063 BJ471[]P-F
UMK063 BJ681[]P-F
UMK063 BJ102[]P-F
UMK063 BJ152[]P-F
UMK063 BJ222[]P-F
UMK063 BJ332[]P-F
UMK063 BJ472[]P-F
UMK063 BJ682[]P-F
UMK063 BJ103[]P-F
TMK063 BJ152[]P-F
TMK063 BJ222[]P-F
TMK063 BJ332[]P-F
TMK063 BJ472[]P-F
TMK063 BJ682[]P-F
TMK063 BJ103[]P-F
TMK063 BJ223[]P-F
EMK063 BJ152[]P-F
EMK063 BJ222[]P-F
EMK063 BJ332[]P-F
EMK063 BJ472[]P-F
EMK063 BJ682[]P-F
EMK063 BJ103[]P-F
EMK063 BJ223[]P-F
EMK063 BJ333[]P-F
EMK063 BJ473[]P-F
EMK063 BJ683[]P-F
EMK063 BJ104[]P-F
EMK063 BJ224[]P-F
Part number 2
Rated voltage [V]
50
25
16
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
150
200
200
200
200
200
200
150
150
150
150
150
150
Thickness
[mm]
*3
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
7
■PARTS NUMBER
Part number 1
Part number 2
CERAMIC CAPACITORS
LMK063 BJ223[]P-F
LMK063 BJ333[]P-F
LMK063 BJ473[]P-F
LMK063 BJ683[]P-F
LMK063 BJ104[]P-F
LMK063 BJ224[]P-F
JMK063 BJ223[]P-F
JMK063 BJ333[]P-F
JMK063 BJ473[]P-F
JMK063 BJ683[]P-F
JMK063 BJ104[]P-F
JMK063 BJ224[]P-F
JMK063 BJ474[]P-F
JMK063ABJ105MP-F
AMK063 BJ224[]P-F
AMK063 BJ474MP-F
AMK063ABJ105MP-F
Rated voltage [V]
Temperature
characteristics
B
10
B
6.3
4
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
22000
33000
47000
68000
0.1
0.22
22000
33000
47000
68000
0.1
0.22
0.47
1
0.22
0.47
1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±20
±20
7.5
7.5
7.5
10
10
10
7.5
7.5
7.5
10
10
10
10
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
33000
47000
68000
0.1
0.22
33000
47000
68000
0.1
0.22
0.47
1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±20
7.5
7.5
10
10
10
7.5
7.5
10
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
100
150
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
1500
2200
3300
4700
6800
10000
22000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
5
5
5
5
5
5
5
5
5
5
5
5
7.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
0.1
0.22
0.47
0.1
15000
22000
33000
47000
0.1
0.22
0.47
1
2.2
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
10
10
10
5
3.5
3.5
3.5
3.5
5
10
10
10
10
p
p
p
p
μ
μ
p
p
p
p
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
Thickness
[mm]
*3
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
0.3±0.03
0.3±0.03
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic C6 : X6S】 0.3mm thickness（P）
Part number 1
Part number 2
LMK063 C6333[]P-F
LMK063 C6473[]P-F
LMK063 C6683[]P-F
LMK063 C6104[]P-F
LMK063 C6224[]P-F
JMK063 C6333[]P-F
JMK063 C6473[]P-F
JMK063 C6683[]P-F
JMK063 C6104[]P-F
JMK063 C6224[]P-F
AMK063 C6474MP-F
AMK063AC6105MP-F
Rated voltage [V]
Temperature
characteristics
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
10
6.3
4
p
p
p
μ
μ
p
p
p
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
150
150
150
150
Thickness
[mm]
*3
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.3mm thickness（P）
Part number 1
Part number 2
UMK063 B7101[]P-F
UMK063 B7151[]P-F
UMK063 B7221[]P-F
UMK063 B7331[]P-F
UMK063 B7471[]P-F
UMK063 B7681[]P-F
UMK063 B7102[]P-F
TMK063 B7152[]P-F
TMK063 B7222[]P-F
TMK063 B7332[]P-F
TMK063 B7472[]P-F
TMK063 B7682[]P-F
TMK063 B7103[]P-F
EMK063 B7152[]P-F
EMK063 B7222[]P-F
EMK063 B7332[]P-F
EMK063 B7472[]P-F
EMK063 B7682[]P-F
EMK063 B7103[]P-F
EMK063 B7223[]P-F
Rated voltage [V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
50
25
16
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
150
Thickness
[mm]
*3
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
●105TYPE
【Temperature Characteristic BJ : B/X5R】 0.5mm thickness（V）
Part number 1
UMK105 BJ221[]V-F
UMK105 BJ331[]V-F
UMK105 BJ471[]V-F
UMK105 BJ681[]V-F
UMK105 BJ102[]V-F
UMK105 BJ152[]V-F
UMK105 BJ222[]V-F
UMK105 BJ332[]V-F
UMK105 BJ472[]V-F
UMK105 BJ682[]V-F
UMK105 BJ103[]V-F
UMK105 BJ104[]V-F
UMK105 BJ224[]V-F
UMK105ABJ474[]V-F
GMK105 BJ104[]V-F
TMK105 BJ153[]V-F
TMK105 BJ223[]V-F
TMK105 BJ333[]V-F
TMK105 BJ473[]V-F
TMK105 BJ104[]V-F
ＴMK105 BJ224[]V-F
ＴMK105ABJ474[]V-F
TMK105 BJ105[]V-F
TMK105CBJ225MV-F
Part number 2
Rated voltage [V]
50
35
25
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
B
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
X5R
X5R
X5R
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
X5R
X5R
X5R
X5R
X5R
p
p
p
p
p
p
p
p
p
p
p
μ
μ
μ
μ
p
p
p
p
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
150
200
150
150
150
150
200
200
150
150
150
200
200
150
150
Thickness
[mm]
*3
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
8
14
■PARTS NUMBER
Part number 1
Rated voltage [V]
16
Temperature
characteristics
B
B
B
B
B
B
B
B
B
10
B
6.3
JMK105 BJ475MV-FD
AMK105 BJ475MV-F
4
*1
X5R
*1
X5R
*1
X5R
*1
X5R
X5R
*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
15000
22000
33000
47000
68000
0.1
0.22
0.47
1
2.2
0.1
0.22
0.47
1
2.2
4.7
0.22
0.47
1
2.2
4.7
3.3
4.7
10
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±20
±10，±20
±10，±20
±10，±20
±20
±20
±20
±20
±20
3.5
3.5
3.5
3.5
5
5
5
10
10
10
5
5
10
10
10
10
5
10
10
10
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
10000
0.1
0.22
0.47
0.47
1
1
2.2
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
5
10
10
10
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
1
±10，±20
±10，±20
±10，±20
±20
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±20
±10，±20
±20
±10，±20
±20
±20
±20
10
10
10
10
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
220
330
470
680
1000
1500
2200
3300
4700
6800
10000
0.1
1500
2200
3300
4700
6800
10000
0.1
0.22
22000
47000
0.1
0.22
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.5
10
2.5
2.5
2.5
2.5
2.5
3.5
10
10
3.5
3.5
5
10
p
p
p
p
p
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
150
150
150
150
150
200
150
150
150
150
150
150
150
150
150
150
150
150
150
Thickness*3
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5±0.05
0.5±0.10
0.5+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 0.3mm thickness（P）
Part number 1
Part number 2
TMK105 BJ103[]P-F
TMK105 BJ104[]P-F
TMK105 BJ224[]P-F
TMK105 BJ474[]P-F
EMK105 BJ474[]P-F
LMK105 BJ105[]PLF
JMK105 BJ105[]P-F
AMK105 BJ225MP-F
Rated voltage [V]
Temperature
characteristics
B
25
16
10
6.3
4
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
p
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
Thickness
[mm]
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
*3
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
CERAMIC CAPACITORS
EMK105 BJ153[]V-F
EMK105 BJ223[]V-F
EMK105 BJ333[]V-F
EMK105 BJ473[]V-F
EMK105 BJ683[]V-F
EMK105 BJ104[]V-F
EMK105 BJ224[]V-F
EMK105ABJ474[]V-F
EMK105 BJ105[]V-F
EMK105ABJ225MV-F
LMK105 BJ104[]V-F
LMK105 BJ224[]V-F
LMK105 BJ474[]V-F
LMK105 BJ105[]V-F
LMK105 BJ225MV-F
LMK105BBJ475MVLF
JMK105 BJ224[]V-F
JMK105 BJ474[]V-F
JMK105 BJ105[]V-F
JMK105 BJ225MV-F
JMK105BBJ475MV-F
AMK105 BJ335MV-F
AMK105ABJ475MV-F
AMK105CBJ106MV-F
Part number 2
【Temperature Characteristic BJ : X5R】 0.2mm thickness（C）
Part number 1
LMK105
JMK105
JMK105
JMK105
Part number 2
BJ104[]C-F
BJ224[]C-F
BJ474[]C-F
BJ105MC-F
Rated voltage [V]
10
6.3
Temperature
characteristics
X5R
X5R
X5R
X5R
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
Thickness
[mm]
Soldering
R:Reflow
W:Wave
R
R
R
R
*3
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
【Temperature Characteristic C6 : X6S】 0.5mm thickness（V）
Part number 1
Part number 2
EMK105 C6105[]V-F
EMK105CC6225MV-F
LMK105 C6105[]V-F
LMK105AC6225MV-F
JMK105 C6105[]V-F
JMK105 C6225MV-F
JMK105BC6475MV-F
AMK105BC6475MV-F
Rated voltage [V]
16
10
6.3
4
Temperature
characteristics
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
Capacitance
[F]
1
2.2
1
2.2
1
2.2
4.7
4.7
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
200
150
150
150
150
150
Thickness
[mm]
*3
0.5±0.05
0.5+0.20/-0
0.5±0.05
0.5±0.10
0.5±0.05
0.5±0.05
0.5+0.15/-0.05
0.5+0.15/-0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.5mm thickness（V）
Part number 1
UMK105 B7221[]V-F
UMK105 B7331[]V-F
UMK105 B7471[]V-F
UMK105 B7681[]V-F
UMK105 B7102[]V-F
UMK105 B7152[]V-F
UMK105 B7222[]V-F
UMK105 B7332[]V-F
UMK105 B7472[]V-F
UMK105 B7682[]V-F
UMK105 B7103[]V-F
UMK105 B7104[]V-FR
TMK105 B7152[]V-F
TMK105 B7222[]V-F
TMK105 B7332[]V-F
TMK105 B7472[]V-F
TMK105 B7682[]V-F
TMK105 B7103[]V-F
TMK105 B7104[]V-FR
TMK105 B7224[]V-FR
EMK105 B7223[]V-F
EMK105 B7473[]V-F
EMK105 B7104[]V-F
EMK105 B7224[]V-FR
Part number 2
Rated voltage [V]
50
25
16
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
p
p
p
p
p
p
p
p
p
p
p
μ
p
p
p
p
p
p
μ
μ
p
p
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
150
200
200
200
200
200
200
200
150
200
200
150
150
Thickness*3
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
9
■PARTS NUMBER
Part number 1
LMK105
LMK105
LMK105
LMK105
LMK105
JMK105
JMK105
Part number 2
B7223[]V-F
B7473[]V-F
B7104[]V-F
B7224[]V-FR
B7474[]V-F
B7224[]V-F
B7474[]V-F
Rated voltage [V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
10
6.3
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
22000
47000
0.1
0.22
0.47
0.22
0.47
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
5
10
10
5
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
10000
22000
47000
0.1
0.22
0.47
1
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
5
5
7
9
11
12.5
20
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.47
1
2.2
1
0.22
0.47
1
2.2
0.22
0.47
1
2.2
4.7
10
0.22
0.47
1
2.2
4.7
10
2.2
4.7
10
10
22
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±20
±20
10
10
10
5
3.5
3.5
5
10
3.5
3.5
5
10
10
10
3.5
3.5
5
10
10
10
10
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±20
±20
10
10
10
10
10
10
10
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±20
5
5
10
10
5
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.22
0.47
1
0.47
1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
10
10
10
10
10
p
p
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
150
150
150
150
150
Thickness
[mm]
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
*3
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
【Temperature Characteristic F : F/Y5V】 0.5mm thickness（V）
Part number 1
CERAMIC CAPACITORS
UMK105
TMK105
EMK105
EMK105
LMK105
JMK105
JMK105
Part number 2
F103ZV-F
F223ZV-F
F473ZV-F
F104ZV-F
F224ZV-F
F474ZV-F
F105ZV-F
Rated voltage [V]
50
25
16
10
6.3
Temperature
characteristics
F
F
F
F
F
F
F
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
p
p
p
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
150
Thickness
[mm]
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
*3
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
●107TYPE
【Temperature Characteristic BJ : B/X5R】 0.8mm thickness（A）
Part number 1
UMK107ABJ474[]A-T
UMK107 BJ105[]A-T
UMK107BBJ225[]A-T
GMK107 BJ105[]A-T
TMK107 BJ224[]A-T
TMK107 BJ474[]A-T
TMK107 BJ105[]A-T
TMK107ABJ225[]A-T
EMK107 BJ224[]A-T
EMK107 BJ474[]A-T
EMK107 BJ105[]A-T
EMK107 BJ225[]A-T
EMK107ABJ475[]A-T
EMK107BBJ106MA-T
LMK107 BJ224[]A-T
LMK107 BJ474[]A-T
LMK107 BJ105[]A-T
LMK107 BJ225[]A-T
LMK107 BJ475[]A-T
LMK107BBJ106MALT
JMK107 BJ225[]A-T
JMK107 BJ475[]A-T
JMK107ABJ106MA-T
AMK107 BJ106MA-T
AMK107BBJ226MA-T
Part number 2
Rated voltage [V]
Temperature
characteristics
UMK107 BJ474[]A-TD
50
35
25
B
B
B
B
TMK107 BJ225[]A-TD
16
B
B
B
B
EMK107 BJ475[]A-TD
10
B
B
B
B
LMK107 BJ106MALTD
B
6.3
JMK107 BJ106MA-T
AMK107 BJ226MA-T
4
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
*1
X5R
*1
X5R
X5R
X5R
X5R
*1
X5R
*1
X5R
*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
200
150
150
150
200
200
150
150
150
150
200
200
200
150
150
150
150
150
150
150
150
Thickness
[mm]
*3
0.8+0.15/-0.05
0.8±0.10
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8±0.10
0.8+0.20/-0
Soldering
R:Reflow
W:Wave
R
R
R
R
R/W
R
R
R
R/W
R
R
R
R
R
R/W
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 0.45mm thickness（K）
Part number 1
TMK107 BJ105[]K-T
EMK107 BJ105[]K-T
EMK107BBJ225[]K-T
LMK107 BJ105[]K-T
LMK107 BJ225[]K-T
LMK107BBJ475MKLT
JMK107 BJ105[]K-T
JMK107 BJ225[]K-T
JMK107 BJ475MK-T
JMK107BBJ106MK-T
AMK107BBJ106MK-T
Part number 2
Rated voltage [V]
Temperature
characteristics
25
16
B
10
LMK107 BJ475MKLTD
B
6.3
4
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
1
1
2.2
1
2.2
4.7
1
2.2
4.7
10
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
150
150
150
Thickness
[mm]
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
*3
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
0.45±0.05
【Temperature Characteristic C6 : X6S】 0.8mm thickness（A）
Part number 1
Part number 2
EMK107 C6105[]A-T
LMK107 C6105[]A-T
LMK107AC6475[]A-T
LMK107BC6106MA-T
JMK107 C6105[]A-T
JMK107 C6475[]A-T
JMK107BC6106MA-T
AMK107AC6106MA-T
Rated voltage [V]
16
10
6.3
4
Temperature
characteristics
X6S
X6S
X6S
X6S
X6S
X6S
X6S
X6S
Capacitance
[F]
1
1
4.7
10
1
4.7
10
10
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
Thickness*3
[mm]
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8+0.15/-0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.8mm thickness（A）
Part number 1
UMK107 B7224[]A-TR
UMK107 B7474[]A-TR
UMK107AB7105[]A-T
TMK107 B7474[]A-TR
TMK107 B7105[]A-T
Part number 2
Rated voltage [V]
50
25
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
Thickness
[mm]
*3
0.8±0.10
0.8±0.10
0.8+0.15/-0.05
0.8±0.10
0.8±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
10
14
■PARTS NUMBER
Part number 1
Part number 2
EMK107 B7224[]A-T
EMK107 B7474[]A-T
EMK107 B7105[]A-T
EMK107BB7225[]A-T
LMK107 B7224[]A-T
LMK107 B7474[]A-T
LMK107 B7105[]A-T
LMK107 B7225[]A-TR
JMK107 B7224[]A-T
JMK107 B7474[]A-T
JMK107 B7105[]A-T
Rated voltage [V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
16
10
6.3
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.22
0.47
1
2.2
0.22
0.47
1
2.2
0.22
0.47
1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
5
10
3.5
3.5
5
10
3.5
3.5
5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.47
0.22
0.47
1
2.2
1
2.2
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
7
7
7
7
16
16
16
16
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
1
2.2
4.7
2.2
4.7
10
2.2
4.7
10
22
2.2
4.7
10
22
4.7
10
22
47
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±20
3.5
3.5
3.5
5
10
10
5
10
10
5
5
10
10
5
5
10
10
5
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1
2.2
0.47
1
2.2
4.7
1
2.2
4.7
10
1
2.2
4.7
10
22
4.7
10
22
47
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±20
10
10
3.5
5
5
10
5
5
10
10
3.5
5
10
10
10
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±20
10
10
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
200
200
150
150
200
200
150
Thickness
[mm]
*3
0.8±0.10
0.8±0.10
0.8±0.10
0.8+0.20/-0
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
Soldering
R:Reflow
W:Wave
R/W
R
R
R
R/W
R
R
R
R/W
R
R
【Temperature Characteristic F : F/Y5V】 0.8mm thickness（A）
UMK107
TMK107
EMK107
EMK107
EMK107
EMK107
LMK107
LMK107
Part number 2
F104ZA-T
F474ZA-T
F224ZA-T
F474ZA-T
F105ZA-T
F225ZA-T
F105ZA-T
F225ZA-T
Rated voltage [V]
50
25
16
10
Temperature
characteristics
F
F
F
F
F
F
F
F
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
Thickness
[mm]
Soldering
R:Reflow
W:Wave
R/W
R/W
R/W
R/W
R
R
R
R
*3
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
●212TYPE
【Temperature Characteristic BJ : B/X5R】 1.25mm thickness（G）
Part number 1
UMK212 BJ104[]G-T
UMK212 BJ224[]G-T
UMK212 BJ474[]G-T
UMK212 BJ105[]G-T
UMK212ABJ225[]G-T
UMK212BBJ475[]G-T
TMK212 BJ225[]G-T
TMK212ABJ475[]G-T
TMK212BBJ106MG-T
EMK212 BJ225[]G-T
EMK212ABJ475[]G-T
EMK212ABJ106[]G-T
EMK212BBJ226MG-T
LMK212 BJ225[]G-T
LMK212ABJ475[]G-T
LMK212ABJ106[]G-T
LMK212BBJ226MG-T
JMK212ABJ475[]G-T
JMK212ABJ106[]G-T
JMK212ABJ226MG-T
JMK212BBJ476MG-T
Part number 2
Rated voltage [V]
50
Temperature
characteristics
B
B
B
B
B
B
TMK212 BJ475[]G-T
25
EMK212 BJ475[]G-T
EMK212 BJ106[]G-T
16
LMK212
LMK212
LMK212
JMK212
JMK212
JMK212
JMK212
BJ475[]G-T
BJ106[]G-T
BJ226MG-T
BJ475[]G-T
BJ106[]G-T
BJ226MG-T
BJ476MG-T
10
B
B
B
B
B
6.3
X5R*1
*1
X5R
*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
*1
X5R
*1
X5R
X5R
X5R
*1
X5R
*1
X5R
X5R
X5R
X5R
*1
X5R
X5R
X5R
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness
[mm]
Rated voltage x ％
200
1.25±0.10
200
1.25±0.10
150
1.25±0.10
150
1.25±0.10
150
1.25+0.15/-0.05
150
1.25+0.20/-0
150
1.25±0.10
150
1.25+0.15/-0.05
150
1.25+0.20/-0
200
1.25±0.10
150
1.25+0.15/-0.05
150
1.25+0.15/-0.05
150
1.25+0.20/-0
200
1.25±0.10
200
1.25+0.15/-0.05
200
1.25+0.15/-0.05
150
1.25+0.20/-0
200
1.25+0.15/-0.05
200
1.25+0.15/-0.05
150
1.25+0.15/-0.05
150
1.25+0.20/-0
*3
Soldering
R:Reflow
W:Wave
R/W
R/W
R/W
R/W
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
Part number 1
【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D）
Part number 1
UMK212ABJ105[]D-T
UMK212BBJ225[]D-T
TMK212 BJ474[]D-T
TMK212 BJ105[]D-T
TMK212ABJ225[]D-T
TMK212BBJ475[]D-T
EMK212 BJ105[]D-T
EMK212ABJ225[]D-T
EMK212 BJ475[]D-T
EMK212ABJ106[]D-T
LMK212 BJ105[]D-T
LMK212 BJ225[]D-T
LMK212 BJ475[]D-T
LMK212ABJ106[]D-T
LMK212BBJ226MD-T
JMK212 BJ475[]D-T
JMK212ABJ106[]D-T
JMK212ABJ226MD-T
AMK212BBJ476MD-T
Part number 2
UMK212 BJ105[]D-TD
TMK212 BJ225[]D-T
TMK212 BJ475[]D-TD
EMK212 BJ225[]D-T
Rated voltage [V]
Temperature
characteristics
50
25
16
B
B
B
B
B
B
EMK212 BJ106[]D-TD
10
LMK212 BJ106[]D-T
JMK212 BJ106[]D-T
JMK212 BJ226MD-T
6.3
4
B
B
B
X5R
X5R
X5R
X5R
X5R
X5R
X5R*1
*1
X5R
X5R
X5R
*1
X5R
*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
200
200
150
150
200
150
150
150
200
200
200
150
150
200
200
150
150
Thickness
[mm]
*3
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : X5R】 0.45mm thickness（K）
Part number 1
Part number 2
LMK212ABJ475[]K-T
LMK212 BJ475[]K-T
JMK212ABJ475[]K-T
JMK212 BJ475[]K-T
JMK212ABJ106MK-T *2 JMK212 BJ106MK-T
Rated voltage [V]
10
6.3
Temperature
characteristics
Capacitance
[F]
X5R
X5R
X5R
4.7 μ
4.7 μ
10 μ
HTLT
Rated voltage x ％
150
150
150
Thickness
[mm]
*3
0.45±0.05
0.45±0.05
0.45±0.05
Soldering
R:Reflow
W:Wave
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
11
■PARTS NUMBER
【Temperature Characteristic C6 : X6S】 1.25mm thickness（G）
Part number 1
Part number 2
LMK212BC6226MG-T
JMK212BC6226MG-T
AMK212AC6226MG-T
AMK212BC6476MG-T
Rated voltage [V]
Temperature
characteristics
10
6.3
X6S
X6S
X6S
X6S
4
Capacitance
[F]
22
22
22
47
μ
μ
μ
μ
Capacitance
tolerance [％]
tanδ
[％]
±20
±20
±20
±20
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
10
HTLT
Thickness
[mm]
Rated voltage x ％
150
1.25+0.20/-0
150
1.25+0.20/-0
150
1.25+0.15/-0.05
150
1.25+0.20/-0
*3
Soldering
R:Reflow
W:Wave
R
R
R
R
【Temperature Characteristic C6 : X6S】 0.85mm thickness（D）
Part number 1
Part number 2
LMK212AC6106[]D-T
Rated voltage [V]
Temperature
characteristics
Capacitance
[F]
X6S
10 μ
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
1
2.2
1
1
2.2
4.7
1
2.2
4.7
10
1
2.2
4.7
10
10
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
3.5
3.5
3.5
10
10
3.5
3.5
10
10
3.5
10
10
10
3.5
5
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
1
2.2
0.47
1
2.2
1
2.2
4.7
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
10
10
10
10
10
3.5
5
5
3.5
5
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.47
1
2.2
4.7
10
10
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
＋80/-20
7
7
7
9
16
16
Capacitance
tolerance [％]
tanδ
[％]
＋80/-20
＋80/-20
＋80/-20
7
9
16
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
3.5
10
10
10
3.5
5
5
10
3.5
5
5
10
5
10
10
10
HTLT
Rated voltage x ％
150
Thickness
[mm]
Soldering
R:Reflow
W:Wave
R
*3
0.85±0.10
【Temperature Characteristic B7 : X7R】 1.25mm thickness（G）
CERAMIC CAPACITORS
Part number 1
UMK212 B7104[]G-T
UMK212 B7224[]G-T
UMK212 B7474[]G-T
UMK212 B7105[]G-T
UMK212BB7225[]G-T
GMK212 B7105[]G-T
TMK212 B7105[]G-T
TMK212 B7225[]G-TR
TMK212AB7475[]G-T
EMK212 B7105[]G-T
EMK212 B7225[]G-T
EMK212 B7475[]G-T
EMK212BB7106MG-T
LMK212 B7105[]G-T
LMK212 B7225[]G-T
LMK212 B7475[]G-T
LMK212AB7106MG-T
JMK212AB7106[]G-T
Part number 2
Rated voltage [V]
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
50
35
25
TMK212 B7475[]G-T
16
10
LMK212 B7106MG-TD
JMK212 B7106[]G-T
6.3
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Thickness
[mm]
Rated voltage x ％
200
1.25±0.10
150
1.25±0.10
150
1.25±0.10
150
1.25±0.10
150
1.25+0.20/-0
150
1.25±0.10
150
1.25±0.10
150
1.25±0.10
150
1.25+0.15/-0.05
200
1.25±0.10
150
1.25±0.10
150
1.25±0.10
150
1.25+0.20/-0
200
1.25±0.10
200
1.25±0.10
150
1.25±0.10
150
1.25+0.15/-0.05
150
1.25+0.15/-0.05
*3
Soldering
R:Reflow
W:Wave
R/W
R/W
R/W
R/W
R
R/W
R
R
R
R/W
R
R
R
R/W
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.85mm thickness（D）
Part number 1
UMK212AB7104[]D-T
UMK212AB7224[]D-T
UMK212AB7474[]D-T
UMK212AB7105[]D-T
TMK212AB7225[]D-TR
EMK212 B7474[]D-T
EMK212 B7105[]D-T
EMK212AB7225[]D-T
LMK212 B7105[]D-T
LMK212AB7225[]D-T
LMK212AB7475[]D-TR
Part number 2
Rated voltage [V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
50
25
16
EMK212 B7225[]D-T
LMK212 B7225[]D-T
LMK212 B7475[]D-TR
10
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
200
200
150
200
200
150
*3
Thickness
[mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R/W
R
R
R
R
R
【Temperature Characteristic F :F/Y5V】 1.25mm thickness（G）
Part number 1
UMK212
UMK212
EMK212
LMK212
LMK212
JMK212
Part number 2
F474ZG-T
F105ZG-T
F225ZG-T
F475ZG-T
F106ZG-T
F106ZG-T
Rated voltage [V]
50
16
10
6.3
Temperature
characteristics
F
F
F
F
F
F
Y5V
Y5V
Y5V
Y5V
Y5V
Y5V
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
Thickness*3
[mm]
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
Soldering
R:Reflow
W:Wave
R/W
R/W
R/W
R
R
R
【Temperature Characteristic F : F/Y5V】 0.85mm thickness（D）
Part number 1
Part number 2
UMK212 F224ZD-T
LMK212 F225ZD-T
JMK212 F475ZD-T
Rated voltage [V]
50
10
6.3
Temperature
characteristics
F
F
F
Capacitance
[F]
Y5V
Y5V
Y5V
0.22 μ
2.2 μ
4.7 μ
Temperature
characteristics
Capacitance
[F]
HTLT
Rated voltage x ％
200
200
200
Thickness*3
[mm]
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R/W
R
R
●316TYPE
【Temperature Characteristic BJ : B/Y5R】 1.6mm thickness（D）
Part number 1
UMK316 BJ105[]L-T
UMK316 BJ225[]L-T
UMK316 BJ475[]L-T
UMK316BBJ106ML-T
TMK316 BJ225[]L-T
TMK316 BJ475[]L-T
TMK316 BJ106[]L-T
TMK316BBJ226ML-T
EMK316 BJ225[]L-T
EMK316 BJ475[]L-T
EMK316 BJ106[]L-T
EMK316ABJ226ML-T
LMK316 BJ106[]L-T
LMK316ABJ226[]Ｌ-T
LMK316ABJ476ML-T
Part number 2
Rated voltage [V]
B
50
25
16
EMK316 BJ226ML-T
LMK316 BJ226[]L-T
LMK316 BJ476ML-T
10
B
B
B
B
B
B
B
B
*1
X5R
X5R
X5R
X5R
*1
X5R
X5R
*1
X5R
X5R
*1
X5R
X5R
*1
X5R
X5R
*1
X5R
X5R
X5R
1
2.2
4.7
10
2.2
4.7
10
22
2.2
4.7
10
22
10
22
47
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
150
150
150
200
150
150
150
200
200
150
150
200
150
150
Thickness
[mm]
*3
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R/W
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
12
14
■PARTS NUMBER
Part number 1
JMK316 BJ106[]L-T
JMK316ABJ226[]L-T
JMK316ABJ476ML-T
JMK316ABJ107ML-T
AMK316ABJ107ML-T
AMK316BBJ157ML-T
Part number 2
JMK316 BJ226[]L-T
JMK316 BJ476ML-T
JMK316 BJ107ML-T
AMK316 BJ107ML-T
Rated voltage [V]
6.3
Temperature
characteristics
B
B
4
*1
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±20
±20
±20
±20
5
10
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±10，±20
±20
±20
3.5
3.5
10
3.5
3.5
5
10
3.5
5
10
10
5
10
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±20
10
Capacitance
tolerance [％]
tanδ
[％]
±20
±20
±20
±20
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.22
0.47
1
2.2
4.7
1
2.2
4.7
10
2.2
10
2.2
4.7
10
22
10
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
3.5
3.5
10
10
3.5
3.5
10
10
3.5
10
3.5
5
10
10
5
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±20
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
＋80/-20
＋80/-20
＋80/-20
＋80/-20
9
9
9
16
Capacitance
tolerance [％]
tanδ
[％]
＋80/-20
＋80/-20
7
7
10
22
47
100
100
150
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
150
150
150
Thickness*3
[mm]
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.30
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
【Temperature Characteristic BJ : B/Y5R】 0.85mm thickness（D）
Part number 1
Rated voltage [V]
50
Temperature
characteristics
B
B
UMK316 BJ475[]D-T
25
B
B
TMK316 BJ106[]D-TD
16
B
B
EMK316 BJ226MD-T
10
B
B
LMK316 BJ226MD-T
B
JMK316 BJ226MD-T
JMK316 BJ476MD-T
6.3
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
1
2.2
4.7
1
2.2
4.7
10
2.2
4.7
10
22
4.7
10
22
10
22
47
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
200
150
150
150
200
200
150
150
200
200
150
200
150
150
Thickness
[mm]
*3
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic C7 : X7S】 1.6mm thickness（L）
Part number 1
Part number 2
AMK316AC7476ML-T
Rated voltage [V]
Temperature
characteristics
Capacitance
[F]
X7S
47 μ
Temperature
characteristics
Capacitance
[F]
4
HTLT
Rated voltage x ％
150
Thickness*3
[mm]
1.6±0.20
Soldering
R:Reflow
W:Wave
R
CERAMIC CAPACITORS
UMK316 BJ105[]D-T
UMK316 BJ225[]D-T
UMK316ABJ475[]D-T
TMK316 BJ105[]D-T
TMK316 BJ225[]D-T
TMK316 BJ475[]D-T
TMK316ABJ106[]D-T
EMK316 BJ225[]D-T
EMK316 BJ475[]D-T
EMK316 BJ106[]D-T
EMK316ABJ226MD-T
LMK316 BJ475[]D-T
LMK316 BJ106[]D-T
LMK316ABJ226MD-T
JMK316 BJ106[]D-T
JMK316ABJ226MD-T
JMK316ABJ476MD-T
Part number 2
【Temperature Characteristic C6 : X6S】 1.6mm thickness（L）
Part number 1
Part number 2
EMK316BC6226ML-T
JMK316AC6476ML-T
AMK316AC6476ML-T
AMK316AC6107ML-T
Rated voltage [V]
16
6.3
X6S
X6S
X6S
X6S
4
22
47
47
100
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
200
150
Thickness
[mm]
*3
1.6±0.30
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
【Temperature Characteristic B7 : X7R】 1.6mm thickness（L）
Part number 1
UMK316 B7224[]L-T
UMK316 B7474[]L-T
UMK316 B7105[]L-T
UMK316 B7225[]L-T
UMK316AB7475[]L-T
TMK316 B7105[]L-T
TMK316 B7225[]L-T
TMK316AB7475[]L-T
TMK316AB7106[]L-T
EMK316 B7225[]L-T
EMK316AB7106[]L-T
LMK316 B7225[]L-T
LMK316 B7475[]L-T
LMK316AB7106[]L-T
LMK316AB7226[]L-TR
JMK316 B7106[]L-T
Part number 2
Rated voltage [V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
50
UMK316 B7475[]L-T
TMK316 B7475[]L-T
TMK316 B7106[]L-TD
EMK316 B7106[]L-TD
LMK316 B7106[]L-TD
LMK316 B7226[]Ｌ-TD
25
16
10
6.3
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
150
150
200
200
200
150
200
200
200
200
200
150
200
Thickness
[mm]
*3
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R/W
R/W
R
R
R
R/W
R
R
R
R/W
R
R/W
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.85mm thickness（D）
Part number 1
Part number 2
UMK316 B7225[]D-T
TMK316AB7475[]D-T
LMK316AB7106MD-T
Rated voltage [V]
Temperature
characteristics
Capacitance
[F]
X7R
X7R
X7R
2.2 μ
4.7 μ
10 μ
Temperature
characteristics
Capacitance
[F]
50
25
10
HTLT
Rated voltage x ％
150
150
150
Thickness
[mm]
*3
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
【Temperature Characteristic F : F/Y5V】 1.6mm thickness（L）
Part number 1
GMK316
TMK316
EMK316
LMK316
Part number 2
F106ZL-T
F106ZL-T
F106ZL-T
F226ZL-T
Rated voltage [V]
35
25
16
10
F
F
F
F
Y5V
Y5V
Y5V
Y5V
10
10
10
22
μ
μ
μ
μ
HTLT
Rated voltage x ％
200
200
200
200
Thickness
[mm]
*3
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
【Temperature Characteristic F : F/Y5V】 1.25mm thickness（G）
Part number 1
UMK316 F225ZG-T
GMK316 F475ZG-T
Part number 2
Rated voltage [V]
50
35
Temperature
characteristics
F
F
Y5V
Y5V
Capacitance
[F]
2.2 μ
4.7 μ
HTLT
Rated voltage x ％
200
200
Thickness
[mm]
*3
1.25±0.10
1.25±0.10
Soldering
R:Reflow
W:Wave
R/W
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
13
■PARTS NUMBER
【Temperature Characteristic F : F/Y5V】 0.85mm thickness（D）
Part number 1
Part number 2
LMK316 F475ZD-T
JMK316 F106ZD-T
Rated voltage [V]
10
6.3
Temperature
characteristics
F
F
Capacitance
[F]
Y5V
Y5V
4.7 μ
10 μ
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
＋80/-20
＋80/-20
9
16
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±20
±10，±20
±10，±20
±20
±10，±20
±20
±10，±20
±20
±20
±20
±20
±20
±20
5
5
10
3.5
5
10
5
10
5
10
10
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±20
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
±10，±20
±20
±20
±10，±20
±20
±20
±20
10
3.5
10
5
3.5
3.5
5
3.5
3.5
10
5
3.5
5
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±20
±10，±20
±10，±20
±10，±20
5
5
10
3.5
5
5
Capacitance
tolerance [％]
tanδ
[％]
±20
10
Capacitance
tolerance [％]
tanδ
[％]
±20
±20
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
5
10
10
10
10
10
10
HTLT
Rated voltage x ％
200
200
Soldering
R:Reflow
W:Wave
R
R
*3
Thickness
[mm]
0.85±0.10
0.85±0.10
●325TYPE
【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M）
Part number 1
CERAMIC CAPACITORS
UMK325 BJ475[]M-T
UMK325 BJ106[]M-T
GMK325 BJ226MM-T
TMK325 BJ106[]M-T
TMK325 BJ226[]M-T
TMK325ABJ476MM-T
EMK325 BJ226[]M-T
EMK325 BJ476MM-T
LMK325 BJ226[]M-T
LMK325 BJ476MM-T
LMK325ABJ107MM-T
JMK325 BJ476MM-T
JMK325ABJ107MM-T
JMK325ABJ227MM-T
AMK325ABJ227MM-T
Part number 2
Rated voltage [V]
50
35
B
25
16
B
B
10
LMK325 BJ107MM-T
JMK325 BJ107MM-T
6.3
4
X5R
X5R
X5R
X5R*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
4.7
10
22
10
22
47
22
47
22
47
100
47
100
220
220
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
200
150
150
150
150
150
150
Thickness
[mm]
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
*3
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.30
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.30
【Temperature Characteristic BJ : B/X5R】 1.9mm thickness（Y,N）
Part number 1
Part number 2
UMK325 BJ475[]N-T
GMK325 BJ225MN-T
GMK325 BJ475[]N-T
GMK325 BJ106[]N-T
TMK325 BJ335MN-T
TMK325 BJ475[]N-T
TMK325 BJ106[]N-T
EMK325 BJ475[]N-T
EMK325 BJ106[]N-T
EMK325 BJ476MY-T
LMK325 BJ226MY-T
LMK325 BJ106[]N-T
JMK325 BJ226MY-T
JMK325 BJ107MY-T
JMK325 BJ476MN-T
Rated voltage [V]
Temperature
characteristics
50
B
35
25
16
10
B
B
B
B
B
B
B
B
B
6.3
X5R
X5R
X5R
X5R
X5R*1
*1
X5R
X5R
*1
X5R
X5R
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
4.7
2.2
4.7
10
3.3
4.7
10
4.7
10
47
22
10
22
100
47
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
200
150
150
200
200
200
200
200
150
150
200
200
150
150
Thickness*3
[mm]
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.20
1.9+0.1/-0.2
1.9+0.1/-0.2
1.9±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D）
Part number 1
Part number 2
TMK325 BJ106[]D-T
EMK325 BJ106[]D-T
EMK325 BJ226MD-T
LMK325 BJ335[]D-T
LMK325 BJ475[]D-T
LMK325 BJ106[]D-T
Rated voltage [V]
25
16
10
Temperature
characteristics
B
B
B
B
B
B
X5R
X5R
X5R
X5R
X5R
X5R
Capacitance
[F]
10
10
22
3.3
4.7
10
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
200
200
150
Thickness
[mm]
*3
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
【Temperature Characteristic C7 : X7S】 2.5mm thickness（M）
Part number 1
Part number 2
JMK325AC7107MM-T
Rated voltage [V]
6.3
Temperature
characteristics
Capacitance
[F]
X7S
100 μ
Temperature
characteristics
Capacitance
[F]
X6S
X6S
47 μ
100 μ
Temperature
characteristics
Capacitance
[F]
HTLT
Rated voltage x ％
150
Thickness*3
[mm]
2.5±0.30
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic C6 : X6S】 2.5mm thickness（M）
Part number 1
Part number 2
EMK325AC6476MM-T
JMK325AC6107MM-T
Rated voltage [V]
16
6.3
HTLT
Rated voltage x ％
150
150
Thickness*3
[mm]
2.5±0.30
2.5±0.30
Soldering
R:Reflow
W:Wave
R
R
【Temperature Characteristic B7 : X7R】 2.5mm thickness（M）
Part number 1
UMK325 B7475[]M-T
UMK325AB7106[]M-T
TMK325AB7106[]M-T
TMK325 B7226[]M-TR
EMK325 B7226[]M-TR
LMK325 B7476[]M-TR
JMK325 B7476[]M-TR
Part number 2
Rated voltage [V]
50
25
16
10
6.3
X7R
X7R
X7R
X7R
X7R
X7R
X7R
4.7
10
10
22
22
47
47
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
200
Thickness
[mm]
*3
2.5±0.20
2.5±0.30
2.5±0.30
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
14
■PARTS NUMBER
【Temperature Characteristic B7 : X7R】 1.9mm thickness（N）
Part number 1
Part number 2
UMK325 B7475[]N-TR
TMK325 B7335[]N-T
TMK325 B7475[]N-T
TMK325 B7106[]N-TR
EMK325 B7475[]N-T
EMK325 B7106[]N-T
LMK325 B7106[]N-T
Rated voltage [V]
Temperature
characteristics
50
X7R
X7R
X7R
X7R
X7R
X7R
X7R
25
16
10
Capacitance
[F]
4.7
3.3
4.7
10
4.7
10
10
μ
μ
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
10
3.5
3.5
10
3.5
3.5
3.5
Capacitance
tolerance [％]
tanδ
[％]
＋80/-20
＋80/-20
＋80/-20
16
16
16
HTLT
Rated voltage x ％
150
200
150
150
200
150
200
Thickness*3
[mm]
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
【Temperature Characteristic F : F/Y5V】 1.9mm thickness（N）
Part number 1
Part number 2
16
10
6.3
Temperature
characteristics
F
F
F
Capacitance
[F]
Y5V
Y5V
Y5V
22 μ
22 μ
47 μ
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
HTLT
Rated voltage x ％
200
200
200
Thickness*3
[mm]
1.9±0.20
1.9±0.20
1.9±0.20
Soldering
R:Reflow
W:Wave
R
R
R
Multilayer Ceramic Capacitors（Temperature compensating type）
●042TYPE
【Temperature Characteristic CG : CG/C0G】 0.2mm thickness（C,D）
Part number 1
EMK042 CG0R4[]D-W
EMK042 CG0R5[]D-W
EMK042 CG0R6[]D-W
EMK042 CG0R7[]D-W
EMK042 CGR75[]D-W
EMK042 CG0R8[]D-W
EMK042 CG0R9[]D-W
EMK042 CG010[]D-W
EMK042 CG1R1[]D-W
EMK042 CG1R2[]D-W
EMK042 CG1R3[]D-W
EMK042 CG1R4[]D-W
EMK042 CG1R5[]D-W
EMK042 CG1R6[]D-W
EMK042 CG1R7[]D-W
EMK042 CG1R8[]D-W
EMK042 CG1R9[]D-W
EMK042 CG020[]D-W
EMK042 CG2R1[]D-W
EMK042 CG2R2[]D-W
EMK042 CG2R3[]D-W
EMK042 CG2R4[]D-W
EMK042 CG2R5[]D-W
EMK042 CG2R6[]D-W
EMK042 CG2R7[]D-W
EMK042 CG2R8[]D-W
EMK042 CG2R9[]D-W
EMK042 CG030[]D-W
EMK042 CG3R1[]D-W
EMK042 CG3R2[]D-W
EMK042 CG3R3[]D-W
EMK042 CG3R4[]D-W
EMK042 CG3R5[]D-W
EMK042 CG3R6[]D-W
EMK042 CG3R7[]D-W
EMK042 CG3R8[]D-W
EMK042 CG3R9[]D-W
EMK042 CG040[]D-W
EMK042 CG4R1[]D-W
EMK042 CG4R2[]D-W
EMK042 CG4R3[]D-W
EMK042 CG4R4[]D-W
EMK042 CG4R5[]D-W
EMK042 CG4R6[]D-W
EMK042 CG4R7[]D-W
EMK042 CG4R8[]D-W
EMK042 CG4R9[]D-W
EMK042 CG050[]D-W
EMK042 CG5R1DD-W
EMK042 CG5R2DD-W
EMK042 CG5R3DD-W
EMK042 CG5R4DD-W
EMK042 CG5R5DD-W
EMK042 CG5R6DD-W
EMK042 CG5R7DD-W
EMK042 CG5R8DD-W
EMK042 CG5R9DD-W
EMK042 CG060DD-W
EMK042 CG6R1DD-W
EMK042 CG6R2DD-W
EMK042 CG6R3DD-W
EMK042 CG6R4DD-W
EMK042 CG6R5DD-W
EMK042 CG6R6DD-W
EMK042 CG6R7DD-W
Part number 2
Rated voltage [V]
16
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
408
200
410
200
412
200
414
200
415
200
416
200
418
200
420
200
422
200
424
200
426
200
428
200
430
200
432
200
434
200
436
200
438
200
440
200
442
200
444
200
446
200
448
200
450
200
452
200
454
200
456
200
458
200
460
200
462
200
464
200
466
200
468
200
470
200
472
200
474
200
476
200
478
200
480
200
482
200
484
200
486
200
488
200
490
200
492
200
494
200
496
200
498
200
500
200
502
200
504
200
506
200
508
200
510
200
512
200
514
200
516
200
518
200
520
200
522
200
524
200
526
200
528
200
530
200
532
200
534
200
Thickness
[mm]
*3
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
EMK325 F226ZN-T
LMK325 F226ZN-T
JMK325 F476ZN-T
Rated voltage [V]
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
15
■PARTS NUMBER
Part number 1
CERAMIC CAPACITORS
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
Part number 2
CG6R8DD-W
CG6R9DD-W
CG070DD-W
CG7R1DD-W
CG7R2DD-W
CG7R3DD-W
CG7R4DD-W
CG7R5DD-W
CG7R6DD-W
CG7R7DD-W
CG7R8DD-W
CG7R9DD-W
CG080DD-W
CG8R1DD-W
CG8R2DD-W
CG8R3DD-W
CG8R4DD-W
CG8R5DD-W
CG8R6DD-W
CG8R7DD-W
CG8R8DD-W
CG8R9DD-W
CG090DD-W
CG9R1DD-W
CG9R2DD-W
CG9R3DD-W
CG9R4DD-W
CG9R5DD-W
CG9R6DD-W
CG9R7DD-W
CG9R8DD-W
CG9R9DD-W
CG100DD-W
CG110JD-W
CG120JD-W
CG130JD-W
CG150JD-W
CG160JC-W
CG180JC-W
CG200JC-W
CG220JC-W
CG240JC-W
CG270JC-W
CG300JC-W
CG330JC-W
CG360JC-W
CG390JC-W
CG430JC-W
CG470JC-W
CG510JC-W
CG560JC-W
CG620JC-W
CG680JC-W
CG750JC-W
CG820JC-W
CG910JC-W
CG101JC-W
Rated voltage [V]
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
16
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
6.8
6.9
7
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
536
200
538
200
540
200
542
200
544
200
546
200
548
200
550
200
552
200
554
200
556
200
558
200
560
200
562
200
564
200
566
200
568
200
570
200
572
200
574
200
576
200
578
200
580
200
582
200
584
200
586
200
588
200
590
200
592
200
594
200
596
200
598
200
600
200
620
200
640
200
660
200
700
200
720
200
760
200
800
200
840
200
880
200
940
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
*3
Thickness
[mm]
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic C△ : C△/C0△】 0.2mm thickness（C,D）
Part number 1
EMK042 CK0R4[]D-W
EMK042 CK0R5[]D-W
EMK042 CK0R6[]D-W
EMK042 CK0R7[]D-W
EMK042 CKR75[]D-W
EMK042 CK0R8[]D-W
EMK042 CK0R9[]D-W
EMK042 CK010[]D-W
EMK042 CK1R1[]D-W
EMK042 CK1R2[]D-W
EMK042 CK1R3[]D-W
EMK042 CK1R4[]D-W
EMK042 CK1R5[]D-W
EMK042 CK1R6[]D-W
EMK042 CK1R7[]D-W
EMK042 CK1R8[]D-W
EMK042 CK1R9[]D-W
EMK042 CK020[]D-W
EMK042 CK2R1[]D-W
EMK042 CK2R2[]D-W
EMK042 CK2R3[]D-W
EMK042 CK2R4[]D-W
EMK042 CK2R5[]D-W
EMK042 CK2R6[]D-W
EMK042 CK2R7[]D-W
EMK042 CK2R8[]D-W
EMK042 CK2R9[]D-W
Part number 2
Rated voltage [V]
16
Temperature
characteristics
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
Capacitance
[F]
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
408
200
410
200
412
200
414
200
415
200
416
200
418
200
420
200
422
200
424
200
426
200
428
200
430
200
432
200
434
200
436
200
438
200
440
200
442
200
444
200
446
200
448
200
450
200
452
200
454
200
456
200
458
200
Thickness
[mm]
*3
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
16
14
■PARTS NUMBER
Part number 1
Rated voltage [V]
16
Temperature
characteristics
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.1pF, ±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
460
200
462
200
464
200
466
200
468
200
470
200
472
200
474
200
476
200
478
200
480
200
482
200
484
200
486
200
488
200
490
200
492
200
494
200
496
200
498
200
500
200
502
200
504
200
506
200
508
200
510
200
512
200
514
200
516
200
518
200
520
200
522
200
524
200
526
200
528
200
530
200
532
200
534
200
536
200
538
200
540
200
542
200
544
200
546
200
548
200
550
200
552
200
554
200
556
200
558
200
560
200
562
200
564
200
566
200
568
200
570
200
572
200
574
200
576
200
578
200
580
200
582
200
584
200
586
200
588
200
590
200
592
200
594
200
596
200
598
200
600
200
620
200
640
200
660
200
700
200
720
200
760
200
800
200
840
200
880
200
940
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
*3
Thickness
[mm]
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
EMK042 CJ030[]D-W
EMK042 CJ3R1[]D-W
EMK042 CJ3R2[]D-W
EMK042 CJ3R3[]D-W
EMK042 CJ3R4[]D-W
EMK042 CJ3R5[]D-W
EMK042 CJ3R6[]D-W
EMK042 CJ3R7[]D-W
EMK042 CJ3R8[]D-W
EMK042 CJ3R9[]D-W
EMK042 CH040[]D-W
EMK042 CH4R1[]D-W
EMK042 CH4R2[]D-W
EMK042 CH4R3[]D-W
EMK042 CH4R4[]D-W
EMK042 CH4R5[]D-W
EMK042 CH4R6[]D-W
EMK042 CH4R7[]D-W
EMK042 CH4R8[]D-W
EMK042 CH4R9[]D-W
EMK042 CH050[]D-W
EMK042 CH5R1DD-W
EMK042 CH5R2DD-W
EMK042 CH5R3DD-W
EMK042 CH5R4DD-W
EMK042 CH5R5DD-W
EMK042 CH5R6DD-W
EMK042 CH5R7DD-W
EMK042 CH5R8DD-W
EMK042 CH5R9DD-W
EMK042 CH060DD-W
EMK042 CH6R1DD-W
EMK042 CH6R2DD-W
EMK042 CH6R3DD-W
EMK042 CH6R4DD-W
EMK042 CH6R5DD-W
EMK042 CH6R6DD-W
EMK042 CH6R7DD-W
EMK042 CH6R8DD-W
EMK042 CH6R9DD-W
EMK042 CH070DD-W
EMK042 CH7R1DD-W
EMK042 CH7R2DD-W
EMK042 CH7R3DD-W
EMK042 CH7R4DD-W
EMK042 CH7R5DD-W
EMK042 CH7R6DD-W
EMK042 CH7R7DD-W
EMK042 CH7R8DD-W
EMK042 CH7R9DD-W
EMK042 CH080DD-W
EMK042 CH8R1DD-W
EMK042 CH8R2DD-W
EMK042 CH8R3DD-W
EMK042 CH8R4DD-W
EMK042 CH8R5DD-W
EMK042 CH8R6DD-W
EMK042 CH8R7DD-W
EMK042 CH8R8DD-W
EMK042 CH8R9DD-W
EMK042 CH090DD-W
EMK042 CH9R1DD-W
EMK042 CH9R2DD-W
EMK042 CH9R3DD-W
EMK042 CH9R4DD-W
EMK042 CH9R5DD-W
EMK042 CH9R6DD-W
EMK042 CH9R7DD-W
EMK042 CH9R8DD-W
EMK042 CH9R9DD-W
EMK042 CH100DD-W
EMK042 CH110JD-W
EMK042 CH120JD-W
EMK042 CH130JD-W
EMK042 CH150JD-W
EMK042 CH160JC-W
EMK042 CH180JC-W
EMK042 CH200JC-W
EMK042 CH220JC-W
EMK042 CH240JC-W
EMK042 CH270JC-W
EMK042 CH300JC-W
EMK042 CH330JC-W
EMK042 CH360JC-W
EMK042 CH390JC-W
EMK042 CH430JC-W
EMK042 CH470JC-W
EMK042 CH510JC-W
Part number 2
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
17
■PARTS NUMBER
Part number 1
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
EMK042
Part number 2
CH560JC-W
CH620JC-W
CH680JC-W
CH750JC-W
CH820JC-W
CH910JC-W
CH101JC-W
Rated voltage [V]
16
Temperature
characteristics
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
Capacitance
tolerance [％]
56
62
68
75
82
91
100
±5％
±5％
±5％
±5％
±5％
±5％
±5％
p
p
p
p
p
p
p
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
Thickness
[mm]
*3
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
●063TYPE
【Temperature Characteristic CG : CG/C0G】 0.3mm thickness（T）
Part number 1
CERAMIC CAPACITORS
UMK063 CG0R2CT-F
UMK063 CG0R3CT-F
UMK063 CG0R4CT-F
UMK063 CG0R5CT-F
UMK063 CG0R6CT-F
UMK063 CG0R7CT-F
UMK063 CGR75CT-F
UMK063 CG0R8CT-F
UMK063 CG0R9CT-F
UMK063 CG010CT-F
UMK063 CG1R1CT-F
UMK063 CG1R2CT-F
UMK063 CG1R3CT-F
UMK063 CG1R4CT-F
UMK063 CG1R5CT-F
UMK063 CG1R6CT-F
UMK063 CG1R7CT-F
UMK063 CG1R8CT-F
UMK063 CG1R9CT-F
UMK063 CG020CT-F
UMK063 CG2R1CT-F
UMK063 CG2R2CT-F
UMK063 CG2R3CT-F
UMK063 CG2R4CT-F
UMK063 CG2R5CT-F
UMK063 CG2R6CT-F
UMK063 CG2R7CT-F
UMK063 CG2R8CT-F
UMK063 CG2R9CT-F
UMK063 CG030CT-F
UMK063 CG3R1CT-F
UMK063 CG3R2CT-F
UMK063 CG3R3CT-F
UMK063 CG3R4CT-F
UMK063 CG3R5CT-F
UMK063 CG3R6CT-F
UMK063 CG3R7CT-F
UMK063 CG3R8CT-F
UMK063 CG3R9CT-F
UMK063 CG040CT-F
UMK063 CG4R1CT-F
UMK063 CG4R2CT-F
UMK063 CG4R3CT-F
UMK063 CG4R4CT-F
UMK063 CG4R5CT-F
UMK063 CG4R6CT-F
UMK063 CG4R7CT-F
UMK063 CG4R8CT-F
UMK063 CG4R9CT-F
UMK063 CG050CT-F
UMK063 CG5R1DT-F
UMK063 CG5R2DT-F
UMK063 CG5R3DT-F
UMK063 CG5R4DT-F
UMK063 CG5R5DT-F
UMK063 CG5R6DT-F
UMK063 CG5R7DT-F
UMK063 CG5R8DT-F
UMK063 CG5R9DT-F
UMK063 CG060DT-F
UMK063 CG6R1DT-F
UMK063 CG6R2DT-F
UMK063 CG6R3DT-F
UMK063 CG6R4DT-F
UMK063 CG6R5DT-F
UMK063 CG6R6DT-F
UMK063 CG6R7DT-F
UMK063 CG6R8DT-F
UMK063 CG6R9DT-F
UMK063 CG070DT-F
UMK063 CG7R1DT-F
UMK063 CG7R2DT-F
UMK063 CG7R3DT-F
UMK063 CG7R4DT-F
UMK063 CG7R5DT-F
UMK063 CG7R6DT-F
Part number 2
Rated voltage [V]
50
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance
tolerance [％]
0.2
0.3
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7
7.1
7.2
7.3
7.4
7.5
7.6
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
404
200
406
200
408
200
410
200
412
200
414
200
415
200
416
200
418
200
420
200
422
200
424
200
426
200
428
200
430
200
432
200
434
200
436
200
438
200
440
200
442
200
444
200
446
200
448
200
450
200
452
200
454
200
456
200
458
200
460
200
462
200
464
200
466
200
468
200
470
200
472
200
474
200
476
200
478
200
480
200
482
200
484
200
486
200
488
200
490
200
492
200
494
200
496
200
498
200
500
200
502
200
504
200
506
200
508
200
510
200
512
200
514
200
516
200
518
200
520
200
522
200
524
200
526
200
528
200
530
200
532
200
534
200
536
200
538
200
540
200
542
200
544
200
546
200
548
200
550
200
552
200
*3
Thickness
[mm]
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
18
14
■PARTS NUMBER
Part number 1
Part number 2
50
25
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
7.7
7.8
7.9
8
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
56
62
68
75
82
91
100
110
120
130
150
180
200
220
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
554
200
556
200
558
200
560
200
562
200
564
200
566
200
568
200
570
200
572
200
574
200
576
200
578
200
580
200
582
200
584
200
586
200
588
200
590
200
592
200
594
200
596
200
598
200
600
200
620
200
640
200
660
200
700
200
720
200
760
200
800
200
840
200
880
200
940
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
Thickness*3
[mm]
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
404
200
406
200
408
200
410
200
412
200
414
200
415
200
416
200
418
200
420
200
422
200
424
200
426
200
428
200
430
200
432
200
434
200
436
200
438
200
440
200
442
200
444
200
446
200
448
200
450
200
452
200
454
200
456
200
458
200
Thickness*3
[mm]
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
UMK063 CG7R7DT-F
UMK063 CG7R8DT-F
UMK063 CG7R9DT-F
UMK063 CG080DT-F
UMK063 CG8R1DT-F
UMK063 CG8R2DT-F
UMK063 CG8R3DT-F
UMK063 CG8R4DT-F
UMK063 CG8R5DT-F
UMK063 CG8R6DT-F
UMK063 CG8R7DT-F
UMK063 CG8R8DT-F
UMK063 CG8R9DT-F
UMK063 CG090DT-F
UMK063 CG9R1DT-F
UMK063 CG9R2DT-F
UMK063 CG9R3DT-F
UMK063 CG9R4DT-F
UMK063 CG9R5DT-F
UMK063 CG9R6DT-F
UMK063 CG9R7DT-F
UMK063 CG9R8DT-F
UMK063 CG9R9DT-F
UMK063 CG100DT-F
UMK063 CG110JT-F
UMK063 CG120JT-F
UMK063 CG130JT-F
UMK063 CG150JT-F
UMK063 CG160JT-F
UMK063 CG180JT-F
UMK063 CG200JT-F
UMK063 CG220JT-F
UMK063 CG240JT-F
UMK063 CG270JT-F
UMK063 CG300JT-F
UMK063 CG330JT-F
UMK063 CG360JT-F
UMK063 CG390JT-F
UMK063 CG430JT-F
UMK063 CG470JT-F
UMK063 CG510JT-F
UMK063 CG560JT-F
UMK063 CG620JT-F
UMK063 CG680JT-F
UMK063 CG750JT-F
UMK063 CG820JT-F
UMK063 CG910JT-F
UMK063 CG101JT-F
TMK063 CG111JT-F
TMK063 CG121JT-F
TMK063 CG131JT-F
TMK063 CG151JT-F
TMK063 CG181JT-F
TMK063 CG201JT-F
TMK063 CG221JT-F
Rated voltage [V]
【Temperature Characteristic C△ : C△/C0△】 0.3mm thickness（T）
Part number 1
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
CK0R2CT-F
CK0R3CT-F
CK0R4CT-F
CK0R5CT-F
CK0R6CT-F
CK0R7CT-F
CKR75CT-F
CK0R8CT-F
CK0R9CT-F
CK010CT-F
CK1R1CT-F
CK1R2CT-F
CK1R3CT-F
CK1R4CT-F
CK1R5CT-F
CK1R6CT-F
CK1R7CT-F
CK1R8CT-F
CK1R9CT-F
CK020CT-F
CK2R1CT-F
CK2R2CT-F
CK2R3CT-F
CK2R4CT-F
CK2R5CT-F
CK2R6CT-F
CK2R7CT-F
CK2R8CT-F
CK2R9CT-F
Part number 2
Rated voltage [V]
50
Temperature
characteristics
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
CK
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
C0K
Capacitance
[F]
Capacitance
tolerance [％]
0.2
0.3
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
2
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
19
■PARTS NUMBER
Part number 1
CERAMIC CAPACITORS
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
UMK063
CJ030CT-F
CJ3R1CT-F
CJ3R2CT-F
CJ3R3CT-F
CJ3R4CT-F
CJ3R5CT-F
CJ3R6CT-F
CJ3R7CT-F
CJ3R8CT-F
CJ3R9CT-F
CH040CT-F
CH4R1CT-F
CH4R2CT-F
CH4R3CT-F
CH4R4CT-F
CH4R5CT-F
CH4R6CT-F
CH4R7CT-F
CH4R8CT-F
CH4R9CT-F
CH050CT-F
CH5R1DT-F
CH5R2DT-F
CH5R3DT-F
CH5R4DT-F
CH5R5DT-F
CH5R6DT-F
CH5R7DT-F
CH5R8DT-F
CH5R9DT-F
CH060DT-F
CH6R1DT-F
CH6R2DT-F
CH6R3DT-F
CH6R4DT-F
CH6R5DT-F
CH6R6DT-F
CH6R7DT-F
CH6R8DT-F
CH6R9DT-F
CH070DT-F
CH7R1DT-F
CH7R2DT-F
CH7R3DT-F
CH7R4DT-F
CH7R5DT-F
CH7R6DT-F
CH7R7DT-F
CH7R8DT-F
CH7R9DT-F
CH080DT-F
CH8R1DT-F
CH8R2DT-F
CH8R3DT-F
CH8R4DT-F
CH8R5DT-F
CH8R6DT-F
CH8R7DT-F
CH8R8DT-F
CH8R9DT-F
CH090DT-F
CH9R1DT-F
CH9R2DT-F
CH9R3DT-F
CH9R4DT-F
CH9R5DT-F
CH9R6DT-F
CH9R7DT-F
CH9R8DT-F
CH9R9DT-F
CH100DT-F
CH110JT-F
CH120JT-F
CH130JT-F
CH150JT-F
CH160JT-F
CH180JT-F
CH200JT-F
CH220JT-F
CH240JT-F
CH270JT-F
CH300JT-F
CH330JT-F
CH360JT-F
CH390JT-F
CH430JT-F
CH470JT-F
CH510JT-F
Part number 2
Rated voltage [V]
50
Temperature
characteristics
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0J
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
3
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.8
3.9
4
4.1
4.2
4.3
4.4
4.5
4.6
4.7
4.8
4.9
5
5.1
5.2
5.3
5.4
5.5
5.6
5.7
5.8
5.9
6
6.1
6.2
6.3
6.4
6.5
6.6
6.7
6.8
6.9
7
7.1
7.2
7.3
7.4
7.5
7.6
7.7
7.8
7.9
8
8.1
8.2
8.3
8.4
8.5
8.6
8.7
8.8
8.9
9
9.1
9.2
9.3
9.4
9.5
9.6
9.7
9.8
9.9
10
11
12
13
15
16
18
20
22
24
27
30
33
36
39
43
47
51
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
460
200
462
200
464
200
466
200
468
200
470
200
472
200
474
200
476
200
478
200
480
200
482
200
484
200
486
200
488
200
490
200
492
200
494
200
496
200
498
200
500
200
502
200
504
200
506
200
508
200
510
200
512
200
514
200
516
200
518
200
520
200
522
200
524
200
526
200
528
200
530
200
532
200
534
200
536
200
538
200
540
200
542
200
544
200
546
200
548
200
550
200
552
200
554
200
556
200
558
200
560
200
562
200
564
200
566
200
568
200
570
200
572
200
574
200
576
200
578
200
580
200
582
200
584
200
586
200
588
200
590
200
592
200
594
200
596
200
598
200
600
200
620
200
640
200
660
200
700
200
720
200
760
200
800
200
840
200
880
200
940
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
*3
Thickness
[mm]
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
20
14
■PARTS NUMBER
Part number 1
Part number 2
UMK063 CH560JT-F
UMK063 CH620JT-F
UMK063 CH680JT-F
UMK063 CH750JT-F
UMK063 CH820JT-F
UMK063 CH910JT-F
UMK063 CH101JT-F
TMK063 CH111JT-F
TMK063 CH121JT-F
TMK063 CH131JT-F
TMK063 CH151JT-F
TMK063 CH181JT-F
TMK063 CH201JT-F
TMK063 CH221JT-F
Rated voltage [V]
50
25
Temperature
characteristics
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
56
62
68
75
82
91
100
110
120
130
150
180
200
220
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
Thickness*3
[mm]
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
Part number 1
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
Part number 2
CG0R5CV-F
CG010CV-F
CG1R5CV-F
CG020CV-F
CG030CV-F
CG040CV-F
CG050CV-F
CG060DV-F
CG070DV-F
CG080DV-F
CG090DV-F
CG100DV-F
CG120JV-F
CG150JV-F
CG180JV-F
CG220JV-F
CG270JV-F
CG330JV-F
CG390JV-F
CG470JV-F
CG560JV-F
CG680JV-F
CG820JV-F
CG101JV-F
CG121JV-F
CG151JV-F
CG181JV-F
CG221JV-F
CG271JV-F
CG331JV-F
CG361JV-F
CG391JV-F
CG431JV-F
CG471JV-F
CG511JV-F
CG561JV-F
CG621JV-F
CG681JV-F
CG751JV-F
CG821JV-F
CG102JV-F
Rated voltage [V]
50
Temperature
characteristics
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
CG
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
C0G
Capacitance
[F]
Capacitance
tolerance [％]
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
360
390
430
470
510
560
620
680
750
820
1000
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
410
200
420
200
430
200
440
200
460
200
480
200
500
200
520
200
540
200
560
200
580
200
600
200
640
200
700
200
760
200
840
200
940
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
Thickness
[mm]
*3
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
●105TYPE
【Temperature Characteristic CG : CG/C0G】 0.5mm thickness（V）
【Temperature Characteristic C△ : C△/C0△】 0.5mm thickness（V）
Part number 1
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
CK0R5CV-F
CK010CV-F
CK1R5CV-F
CK020CV-F
CJ030CV-F
CH040CV-F
CH050CV-F
CH060DV-F
CH070DV-F
CH080DV-F
CH090DV-F
CH100DV-F
CH120JV-F
CH150JV-F
CH180JV-F
CH220JV-F
CH270JV-F
CH330JV-F
CH390JV-F
CH470JV-F
CH560JV-F
CH680JV-F
CH820JV-F
Part number 2
Rated voltage [V]
50
Temperature
characteristics
CK
CK
CK
CK
CJ
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0K
C0K
C0K
C0K
C0J
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
410
200
420
200
430
200
440
200
460
200
480
200
500
200
520
200
540
200
560
200
580
200
600
200
640
200
700
200
760
200
840
200
940
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
*3
Thickness
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
21
■PARTS NUMBER
Part number 1
CERAMIC CAPACITORS
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
Part number 2
Rated voltage [V]
CH101JV-F
CH121JV-F
CH151JV-F
CH181JV-F
CH221JV-F
CH271JV-F
CH331JV-F
CH361JV-F
CH391JV-F
CH431JV-F
CH471JV-F
CH511JV-F
CH561JV-F
CH621JV-F
CH681JV-F
CH751JV-F
CH821JV-F
CH102JV-F
50
Temperature
characteristics
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
Capacitance
tolerance [％]
100
120
150
180
220
270
330
360
390
430
470
510
560
620
680
750
820
1000
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
Thickness
[mm]
*3
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic U△ : U△/U2△】 0.5mm thickness（V）
Part number 1
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
Part number 2
Rated voltage [V]
UK0R5CV-F
UK010CV-F
UK1R5CV-F
UK020CV-F
UK030CV-F
UJ040CV-F
UJ050CV-F
UJ060DV-F
UJ070DV-F
UJ080DV-F
UJ090DV-F
UJ100DV-F
UJ120JV-F
UJ150JV-F
UJ180JV-F
UJ220JV-F
UJ270JV-F
UJ330JV-F
UJ390JV-F
UJ470JV-F
UJ560JV-F
UJ680JV-F
UJ820JV-F
UJ101JV-F
UJ121JV-F
UJ151JV-F
UJ181JV-F
UJ221JV-F
UJ271JV-F
UJ331JV-F
50
Temperature
characteristics
UK
UK
UK
UK
UK
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
UJ
U2K
U2K
U2K
U2K
U2K
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
U2J
Capacitance
[F]
0.5
1
1.5
2
3
4
5
6
7
8
9
10
12
15
18
22
27
33
39
47
56
68
82
100
120
150
180
220
270
330
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.25pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±0.5pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
410
200
420
200
430
200
440
200
460
200
480
200
500
200
520
200
540
200
560
200
580
200
600
200
640
200
700
200
760
200
840
200
940
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
Thickness
[mm]
*3
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic SL】 0.5mm thickness（V）
Part number 1
UMK105
UMK105
UMK105
UMK105
UMK105
UMK105
Part number 2
SL121JV-F
SL151JV-F
SL181JV-F
SL221JV-F
SL271JV-F
SL331JV-F
Rated voltage [V]
50
Temperature
characteristics
SL
SL
SL
SL
SL
SL
Capacitance
[F]
120
150
180
220
270
330
p
p
p
p
p
p
Capacitance
tolerance [％]
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1MHz)
Rated voltage x ％
min
1000
200
1000
200
1000
200
1000
200
1000
200
1000
200
*3
Thickness
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
Multilayer Ceramic Capacitors for High Frequency Applications (1GHz+)
●042TYPE
【Temperature Characteristic CH : CH/C0H】 0.2mm thickness（C）
Part number 1
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
CH0R2[]C-W
CH0R3[]C-W
CH0R4[]C-W
CH0R5[]C-W
CH0R6[]C-W
CH0R7[]C-W
CHR75[]C-W
CH0R8[]C-W
CH0R9[]C-W
CH010[]C-W
CH1R1[]C-W
CH1R2[]C-W
CH1R3[]C-W
CH1R5[]C-W
CH1R6[]C-W
CH1R8[]C-W
CH020[]C-W
CH2R2[]C-W
CH2R4[]C-W
Part number 2
Rated voltage [V]
25
Temperature
characteristics
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
0.2
0.3
0.4
0.5
0.6
0.7
0.75
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
±0.1pF,
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
0.25pF
Q
HTLT
(at 1GHz)
Rated voltage x ％
(min)
300
200
300
200
300
200
300
200
300
200
300
200
300
200
300
200
300
200
300
200
280
200
270
200
260
200
240
200
230
200
210
200
190
200
180
200
170
200
Thickness*3
[mm]
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
22
14
■PARTS NUMBER
Part number 1
CH2R7[]C-W
CH030[]C-W
CH3R3[]C-W
CH3R6[]C-W
CH3R9[]C-W
CH040[]C-W
CH4R3[]C-W
CH4R7[]C-W
CH050[]C-W
CH5R1[]C-W
CH5R6[]C-W
CH060[]C-W
CH6R2[]C-W
CH6R8[]C-W
CH070[]C-W
CH7R5[]C-W
CH080[]C-W
CH8R2[]C-W
CH090[]C-W
CH9R1[]C-W
CH100[]C-W
CH110JC-W
CH120JC-W
CH130JC-W
CH150JC-W
CH160JC-W
CH180JC-W
CH220JC-W
Rated voltage [V]
25
Temperature
characteristics
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
2.7
3
3.3
3.6
3.9
4
4.3
4.7
5
5.1
5.6
6
6.2
6.8
7
7.5
8
8.2
9
9.1
10
11
12
13
15
16
18
22
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.1pF, 0.25pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±0.25pF, 0.5pF
±2%, ±5%
±5%
±5%
±5%
±5%
±5%
±5%
±5%
Q
HTLT
(at 1GHz)
Rated voltage x ％
(min)
150
200
130
200
120
200
110
200
100
200
90
200
85
200
85
200
80
200
75
200
70
200
65
200
65
200
60
200
60
200
55
200
55
200
50
200
50
200
45
200
45
200
40
200
40
200
40
200
40
200
40
200
40
200
30
200
Thickness
[mm]
*3
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
0.2±0.02
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
●105TYPE
【Temperature Characteristic CH : CH/C0H】 0.5mm thickness（W）
Part number 1
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
EVK105
Part number 2
CH0R3BW-F
CH0R4BW-F
CH0R5BW-F
CH0R6BW-F
CH0R7BW-F
CH0R8BW-F
CH0R9BW-F
CH010BW-F
CH1R1BW-F
CH1R2BW-F
CH1R3BW-F
CH1R5BW-F
CH1R6BW-F
CH1R8BW-F
CH020BW-F
CH2R2JW-F
CH2R4JW-F
CH2R7JW-F
CH030JW-F
CH3R3JW-F
CH3R6JW-F
CH3R9JW-F
CH4R3JW-F
CH4R7JW-F
CH5R1JW-F
Rated voltage [V]
16
Temperature
characteristics
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.3
4.7
5.1
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1GHz)
Rated voltage x ％
(min)
300
200
300
200
300
200
300
200
300
200
300
200
300
200
300
200
280
200
270
200
260
200
240
200
230
200
210
200
190
200
180
200
170
200
150
200
130
200
120
200
110
200
99
200
84
200
84
200
84
200
Thickness*3
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
CERAMIC CAPACITORS
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
TVS042
Part number 2
【Temperature Characteristic CH : CH/C0H】 0.5mm thickness（W）
Part number 1
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
UVK105
CH0R3BW-F
CH0R4BW-F
CH0R5BW-F
CH0R6BW-F
CH0R7BW-F
CH0R8BW-F
CH0R9BW-F
CH010BW-F
CH1R1BW-F
CH1R2BW-F
CH1R3BW-F
CH1R5BW-F
CH1R6BW-F
CH1R8BW-F
CH020BW-F
CH2R2JW-F
CH2R4JW-F
CH2R7JW-F
CH030JW-F
CH3R3JW-F
CH3R6JW-F
CH3R9JW-F
CH4R3JW-F
CH4R7JW-F
CH5R1JW-F
Part number 2
Rated voltage [V]
50
Temperature
characteristics
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
CH
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
C0H
Capacitance
[F]
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1
1.1
1.2
1.3
1.5
1.6
1.8
2
2.2
2.4
2.7
3
3.3
3.6
3.9
4.3
4.7
5.1
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
Capacitance
tolerance [％]
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±0.1pF
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
±5％
Q
HTLT
(at 1GHz)
Rated voltage x ％
(min)
300
200
300
200
300
200
300
200
300
200
300
200
300
200
300
200
280
200
270
200
260
200
240
200
230
200
210
200
190
200
180
200
170
200
150
200
130
200
120
200
110
200
99
200
84
200
84
200
84
200
Thickness
[mm]
*3
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
23
■PARTS NUMBER
Super Low Distortion Multilayer Ceramic Capacitors (CFCAPTM )
●105TYPE
【Temperature Characteristic SD : Standard】 0.5mm thickness（V）
Part number 1
Part number 2
CERAMIC CAPACITORS
UMK105 SD391KV-F
UMK105 SD471KV-F
UMK105 SD561KV-F
TMK105 SD681KV-F
TMK105 SD821KV-F
TMK105 SD102KV-F
TMK105 SD122KV-F
EMK105 SD152KV-F
EMK105 SD182KV-F
EMK105 SD222KV-F
EMK105 SD272KV-F
LMK105 SD332KV-F
LMK105 SD392KV-F
LMK105 SD472KV-F
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Standard Type
390
470
560
680
820
1000
1200
1500
1800
2200
2700
3300
3900
4700
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Rated voltage [V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
10
6.3
Standard Type
±10
±10
0.1
0.1
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1000
1200
1500
1800
2200
2700
3300
3900
4700
5600
6800
8200
10000
12000
15000
18000
22000
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Rated voltage [V]
50
25
16
10
p
p
p
p
p
p
p
p
p
p
p
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
200
200
200
Thickness
[mm]
*3
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic SD : Standard】 0.3mm thickness（P）
Part number 1
Part number 2
LMK105 SD152KP-F
JMK105 SD272KP-F
1500 p
2700 p
HTLT
Rated voltage x ％
200
200
Thickness
[mm]
*3
0.3±0.03
0.3±0.03
Soldering
R:Reflow
W:Wave
R
R
●107TYPE
【Temperature Characteristic SD : Standard】 0.8mm thickness（A）
Part number 1
Part number 2
UMK107 SD102KA-T
UMK107 SD122KA-T
UMK107 SD152KA-T
UMK107 SD182KA-T
UMK107 SD222KA-T
UMK107 SD272KA-T
UMK107 SD332KA-T
TMK107 SD392KA-T
TMK107 SD472KA-T
EMK107 SD562KA-T
EMK107 SD682KA-T
EMK107 SD822KA-T
EMK107 SD103KA-T
LMK107 SD123KA-T
LMK107 SD153KA-T
LMK107 SD183KA-T
LMK107 SD223KA-T
Rated voltage [V]
Temperature
characteristics
50
Standard Type
25
16
10
Standard Type
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
200
Thickness
[mm]
*3
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
R
●212TYPE
【Temperature Characteristic SD : Standard】 1.25mm thickness（G）
Part number 1
Part number 2
GMK212 SD183KG-T
GMK212 SD223KG-T
GMK212 SD273KG-T
LMK212 SD683KG-T
LMK212 SD823KG-T
LMK212 SD104KG-T
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Standard Type
18000
22000
27000
68000
82000
0.1
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Standard Type
3900
4700
5600
6800
8200
10000
12000
15000
33000
47000
±10
±10
±10
±10
±10
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
0.1
Rated voltage [V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
25
Standard Type
82000 p
0.1 μ
±10
±10
0.1
0.1
Rated voltage [V]
35
10
p
p
p
p
p
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
Thickness
[mm]
*3
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
【Temperature Characteristic SD : Standard】 0.85mm thickness（D）
Part number 1
Part number 2
UMK212 SD392KD-T
UMK212 SD472KD-T
UMK212 SD562KD-T
UMK212 SD682KD-T
UMK212 SD822KD-T
UMK212 SD103KD-T
GMK212 SD123KD-T
GMK212 SD153KD-T
EMK212 SD333KD-T
LMK212 SD473KD-T
Rated voltage [V]
50
35
16
10
p
p
p
p
p
p
p
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
Thickness
[mm]
*3
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
●316TYPE
【Temperature Characteristic SD : Standard】 1.6mm thickness（L）
Part number 1
TMK316 SD823KL-T
TMK316 SD104KL-T
Part number 2
HTLT
Rated voltage x ％
200
200
Thickness
[mm]
*3
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
24
14
■PARTS NUMBER
【Temperature Characteristic SD : Standard】 1.15mm thickness（F）
Part number 1
Part number 2
GMK316 SD333KF-T
GMK316 SD393KF-T
TMK316 SD473KF-T
TMK316 SD563KF-T
TMK316 SD683KF-T
Rated voltage [V]
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
Standard Type
33000
39000
47000
56000
68000
±10
±10
±10
±10
±10
0.1
0.1
0.1
0.1
0.1
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
X5R
X5R
X5R
0.22 μ
0.47 μ
1μ
±10，±20
±10，±20
±10，±20
10
10
10
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
X5R
X5R
1μ
2.2 μ
±10，±20
±10，±20
10
10
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
X5R
X5R
X5R
1μ
4.7 μ
10 μ
±10，±20
±10，±20
±10，±20
10
10
10
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
X5R
1μ
±10，±20
10
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
X5R
1.5 μ
±10，±20
5
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1000
1500
2200
3300
4700
6800
10000
15000
22000
33000
47000
0.1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1000
1500
2200
3300
4700
6800
10000
15000
22000
33000
47000
0.1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
35
25
p
p
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
Thickness
[mm]
Soldering
R:Reflow
W:Wave
R
R
R
R
R
*3
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
Low Distortion High Value Multilayer Ceramic Capacitors(CF_LD)
●107TYPE
【Temperature Characteristic LD : X5R】 0.8mm thickness（A）
Part number 1
Part number 2
50
25
HTLT
Rated voltage x ％
150
150
150
Soldering
R:Reflow
W:Wave
R
R
R
Thickness*3
[mm]
0.8+0.20/-0
0.8+0.20/-0
0.8+0.20/-0
●212TYPE
【Temperature Characteristic LD : X5R】 1.25mm thickness（G）
Part number 1
Part number 2
GMK212 LD105[]G-T
GMK212BLD225[]G-T
Rated voltage [V]
35
●316TYPE
【Temperature Characteristic LD : X5R】 1.6mm thickness（L）
Rated voltage [V]
Part number 2
Part number 1
UMK316 LD105[]L-T
GMK316BLD475[]L-T
TMK316BLD106[]L-T
50
35
25
HTLT
Rated voltage x ％
150
150
HTLT
Rated voltage x ％
150
150
150
Thickness*3
[mm]
1.25±0.10
1.25+0.20/-0
Thickness
[mm]
*3
1.6±0.20
1.6±0.30
1.6±0.30
Soldering
R:Reflow
W:Wave
R
R
Soldering
R:Reflow
W:Wave
R
R
R
CERAMIC CAPACITORS
UMK107BLD224[]A-T
TMK107BLD474[]A-T
TMK107BLD105[]A-T
Rated voltage [V]
●325TYPE
【Temperature Characteristic LD : X5R】 1.9mm thickness（N）
Part number 1
Part number 2
UMK325 LD105[]N-T
Rated voltage [V]
50
HTLT
Rated voltage x ％
200
Thickness
[mm]
*3
1.9±0.20
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic LD : X5R】 2.5mm thickness（M）
Part number 1
Part number 2
UMK325 LD155[]M-T
Rated voltage [V]
50
HTLT
Rated voltage x ％
150
Thickness*3
[mm]
2.5±0.20
Soldering
R:Reflow
W:Wave
R
Medium-High Voltage Multilayer Ceramic Capacitors
●107TYPE
【Temperature Characteristic BJ : B/X5R】 0.8mm thickness（A）
Part number 1
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
Part number 2
BJ102[]A-T
BJ152[]A-T
BJ222[]A-T
BJ332[]A-T
BJ472[]A-T
BJ682[]A-T
BJ103[]A-T
BJ153[]A-T
BJ223[]A-T
BJ333[]A-T
BJ473[]A-T
BJ104[]A-T
Rated voltage [V]
B
B
B
B
B
B
B
B
B
B
B
B
100
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
p
p
p
p
p
p
p
p
p
p
p
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
200
Thickness
[mm]
*3
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R , C7 : X7S】 0.8mm thickness（A）
Part number 1
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
HMK107
B7102[]A-T
B7152[]A-T
B7222[]A-T
B7332[]A-T
B7472[]A-T
B7682[]A-T
B7103[]A-T
B7153[]A-T
B7223[]A-T
B7333[]A-T
B7473[]A-T
C7104[]A-T
Part number 2
Rated voltage [V]
100
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7S
p
p
p
p
p
p
p
p
p
p
p
μ
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
200
200
200
200
Thickness*3
[mm]
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
0.8±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
25
■PARTS NUMBER
●212TYPE
【Temperature Characteristic BJ : B/X5R】 1.25mm thickness（G）
Part number 1
Part number 2
CERAMIC CAPACITORS
HMK212 BJ103[]G-T
HMK212 BJ153[]G-T
HMK212 BJ223[]G-T
HMK212 BJ333[]G-T
HMK212 BJ473[]G-T
HMK212 BJ683[]G-T
HMK212 BJ104[]G-T
HMK212 BJ224[]G-T
QMK212 BJ472[]G-T
QMK212 BJ682[]G-T
QMK212 BJ103[]G-T
QMK212 BJ153[]G-T
QMK212 BJ223[]G-T
Rated voltage [V]
100
250
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
10000
15000
22000
33000
47000
68000
0.1
0.22
4700
6800
10000
15000
22000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1000
1500
2200
3300
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
10000
15000
22000
33000
47000
68000
0.1
0.22
4700
6800
10000
15000
22000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1000
1500
2200
3300
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
47000
68000
0.1
0.15
0.22
0.33
0.47
1
33000
47000
68000
0.1
15000
22000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1000
1500
2200
3300
4700
6800
10000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
p
p
p
p
p
p
μ
μ
p
p
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
150
150
150
150
150
Thickness*3
[mm]
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 0.85mm thickness（D）
Part number 1
QMK212
QMK212
QMK212
QMK212
Part number 2
BJ102[]D-T
BJ152[]D-T
BJ222[]D-T
BJ332[]D-T
Rated voltage [V]
250
Temperature
characteristics
B
B
B
B
*1
X5R
*1
X5R
*1
X5R
*1
X5R
p
p
p
p
HTLT
Rated voltage x ％
150
150
150
150
Thickness
[mm]
*3
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
【Temperature Characteristic B7 : X7R】 1.25mm thickness（G）
Part number 1
Part number 2
HMK212 B7103[]G-T
HMK212 B7153[]G-T
HMK212 B7223[]G-T
HMK212 B7333[]G-T
HMK212 B7473[]G-T
HMK212 B7683[]G-T
HMK212 B7104[]G-T
HMK212 B7224[]G-T
QMK212 B7472[]G-T
QMK212 B7682[]G-T
QMK212 B7103[]G-T
QMK212 B7153[]G-T
QMK212 B7223[]G-T
Rated voltage [V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100
250
p
p
p
p
p
p
μ
μ
p
p
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
150
150
150
150
150
Thickness
[mm]
*3
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
1.25±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 0.85mm thickness（D）
Part number 1
QMK212
QMK212
QMK212
QMK212
Part number 2
B7102[]D-T
B7152[]D-T
B7222[]D-T
B7332[]D-T
Rated voltage [V]
Temperature
characteristics
X7R
X7R
X7R
X7R
250
p
p
p
p
HTLT
Rated voltage x ％
150
150
150
150
Thickness
[mm]
*3
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
●316TYPE
【Temperature Characteristic BJ : B/X5R】 1.6mm thickness（L）
Part number 1
Part number 2
HMK316 BJ473[]L-T
HMK316 BJ683[]L-T
HMK316 BJ104[]L-T
HMK316 BJ154[]L-T
HMK316 BJ224[]L-T
HMK316 BJ334[]L-T
HMK316 BJ474[]L-T
HMK316 BJ105[]L-T
QMK316 BJ333[]L-T
QMK316 BJ473[]L-T
QMK316 BJ683[]L-T
QMK316 BJ104[]L-T
SMK316 BJ153[]L-T
SMK316 BJ223[]L-T
Rated voltage [V]
100
250
630
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
B
B
B
X5R*1
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
p
p
μ
μ
μ
μ
μ
μ
p
p
p
μ
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
150
150
150
150
120
120
Thickness
[mm]
*3
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 1.15mm thickness（F）
Part number 1
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
BJ102[]F-T
BJ152[]F-T
BJ222[]F-T
BJ332[]F-T
BJ472[]F-T
BJ682[]F-T
BJ103[]F-T
Part number 2
Rated voltage [V]
630
Temperature
characteristics
B
B
B
B
B
B
B
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
p
p
p
p
p
p
p
HTLT
Rated voltage x ％
120
120
120
120
120
120
120
Thickness*3
[mm]
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
26
14
■PARTS NUMBER
【Temperature Characteristic B7 : X7R】 1.6mm thickness（L）
Part number 1
Part number 2
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
100
250
630
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
47000
68000
0.1
0.15
0.22
0.33
0.47
1
33000
47000
68000
0.1
15000
22000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
1000
1500
2200
3300
4700
6800
10000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
3.5
p
p
μ
μ
μ
μ
μ
μ
p
p
p
μ
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
200
200
150
150
150
150
120
120
Thickness
[mm]
*3
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
1.6±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 1.15mm thickness（F）
Part number 1
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
SMK316
Part number 2
B7102[]F-T
B7152[]F-T
B7222[]F-T
B7332[]F-T
B7472[]F-T
B7682[]F-T
B7103[]F-T
Rated voltage [V]
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
630
p
p
p
p
p
p
p
HTLT
Rated voltage x ％
120
120
120
120
120
120
120
Thickness
[mm]
*3
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
1.15±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
●325TYPE
【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M）
Part number 1
Part number 2
HMK325 BJ225[]M-T
Rated voltage [V]
100
Temperature
characteristics
Capacitance
[F]
X5R*1
2.2 μ
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.15
0.22
0.33
0.47
0.68
1
47000
0.1
0.15
0.22
22000
33000
47000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
3.5
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
3.5
B
HTLT
Rated voltage x ％
200
Thickness
[mm]
*3
2.5±0.20
CERAMIC CAPACITORS
HMK316 B7473[]L-T
HMK316 B7683[]L-T
HMK316 B7104[]L-T
HMK316 B7154[]L-T
HMK316 B7224[]L-T
HMK316 B7334[]L-T
HMK316 B7474[]L-T
HMK316 B7105[]L-T
QMK316 B7333[]L-T
QMK316 B7473[]L-T
QMK316 B7683[]L-T
QMK316 B7104[]L-T
SMK316 B7153[]L-T
SMK316 B7223[]L-T
Rated voltage [V]
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic BJ : B/X5R】 1.9mm thickness（N）
Part number 1
Part number 2
HMK325 BJ154[]N-T
HMK325 BJ224[]N-T
HMK325 BJ334[]N-T
HMK325 BJ474[]N-T
HMK325 BJ684[]N-T
HMK325 BJ105[]N-T
QMK325 BJ473[]N-T
QMK325 BJ104[]N-T
QMK325 BJ154[]N-T
QMK325 BJ224[]N-T
SMK325 BJ223[]N-T
SMK325 BJ333[]N-T
SMK325 BJ473[]N-T
Rated voltage [V]
100
250
630
B
B
B
B
B
B
B
B
B
B
B
B
B
X5R*1
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
μ
μ
μ
μ
μ
μ
p
μ
μ
μ
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
150
150
150
150
120
120
120
Thickness*3
[mm]
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic BJ : B/X5R】 1.15mm thickness（F）
Part number 1
Part number 2
HMK325 BJ104[]F-T
Rated voltage [V]
100
【Temperature Characteristic B7 : X7R】 2.5mm thickness（M）
Rated voltage [V]
Part number 1
Part number 2
HMK325 B7225[]M-T
100
Temperature
characteristics
Capacitance
[F]
*1
0.1 μ
Temperature
characteristics
Capacitance
[F]
X7R
2.2 μ
Temperature
characteristics
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.15
0.22
0.33
0.47
0.68
1
47000
0.1
0.15
0.22
22000
33000
47000
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
3.5
B
X5R
HTLT
Rated voltage x ％
200
HTLT
Rated voltage x ％
200
Thickness*3
[mm]
1.15±0.10
Thickness*3
[mm]
2.5±0.20
Soldering
R:Reflow
W:Wave
R
Soldering
R:Reflow
W:Wave
R
【Temperature Characteristic B7 : X7R】 1.9mm thickness（N）
Part number 1
Part number 2
HMK325 B7154[]N-T
HMK325 B7224[]N-T
HMK325 B7334[]N-T
HMK325 B7474[]N-T
HMK325 B7684[]N-T
HMK325 B7105[]N-T
QMK325 B7473[]N-T
QMK325 B7104[]N-T
QMK325 B7154[]N-T
QMK325 B7224[]N-T
SMK325 B7223[]N-T
SMK325 B7333[]N-T
SMK325 B7473[]N-T
Rated voltage [V]
100
250
630
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
μ
μ
μ
μ
μ
μ
p
μ
μ
μ
p
p
p
HTLT
Rated voltage x ％
200
200
200
200
200
200
150
150
150
150
120
120
120
Thickness*3
[mm]
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
1.9±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 1.15mm thickness（F）
Part number 1
HMK325 B7104[]F-T
Part number 2
Rated voltage [V]
100
Temperature
characteristics
Capacitance
[F]
X7R
0.1 μ
HTLT
Rated voltage x ％
200
Thickness*3
[mm]
1.15±0.10
Soldering
R:Reflow
W:Wave
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
27
■PARTS NUMBER
●432TYPE
【Temperature Characteristic BJ : B/X5R】 2.5mm thickness（M）
Part number 1
Part number 2
HMK432 BJ474[]M-T
HMK432 BJ105[]M-T
HMK432 BJ155[]M-T
HMK432 BJ225[]M-T
QMK432 BJ104[]M-T
QMK432 BJ224[]M-T
QMK432 BJ334[]M-T
QMK432 BJ474[]M-T
SMK432 BJ473[]M-T
SMK432 BJ683[]M-T
SMK432 BJ104[]M-T
Rated voltage [V]
100
250
630
Temperature
characteristics
B
B
B
B
B
B
B
B
B
B
B
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
*1
X5R
CERAMIC CAPACITORS
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.47
1
1.5
2.2
0.1
0.22
0.33
0.47
47000
68000
0.1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.47
1
1.5
2.2
0.1
0.22
0.33
0.47
47000
68000
0.1
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
±10，±20
3.5
3.5
3.5
3.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
0.1
0.47
1
2.2
0.22
±20
±20
±20
±20
±20
±20
±20
±20
5
10
10
5
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.1
0.22
0.1
0.22
0.47
0.22
0.47
1
2.2
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
5
10
5
10
10
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
1
2.2
1
2.2
4.7
10
±20
±20
±20
±20
±20
±20
±20
±20
±20
5
5
5
10
10
10
10
10
10
Capacitance
[F]
Capacitance
tolerance [％]
tanδ
[％]
0.1
0.22
0.47
1
2.2
4.7
10
±20
±20
±20
±20
±20
±20
±20
5
5
5
10
10
10
10
μ
μ
μ
μ
μ
μ
μ
μ
p
p
μ
HTLT
Rated voltage x ％
200
200
200
200
150
150
150
150
120
120
120
Thickness*3
[mm]
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R】 2.5mm thickness（M）
Part number 1
Part number 2
HMK432 B7474[]M-T
HMK432 B7105[]M-T
HMK432 B7155[]M-T
HMK432 B7225[]M-T
QMK432 B7104[]M-T
QMK432 B7224[]M-T
QMK432 B7334[]M-T
QMK432 B7474[]M-T
SMK432 B7473[]M-T
SMK432 B7683[]M-T
SMK432 B7104[]M-T
Rated voltage [V]
100
250
630
Temperature
characteristics
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
X7R
μ
μ
μ
μ
μ
μ
μ
μ
p
p
μ
HTLT
Rated voltage x ％
200
200
200
200
150
150
150
150
120
120
120
Thickness
[mm]
*3
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
2.5±0.20
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
R
LW Reversal Decoupling Capacitors (LWDC TM )
●105TYPE
【Temperature Characteristic BJ : X5R】 0.3mm thickness（P）
Part number 1
Part number 2
TWK105 BJ104MP-F
EWK105 BJ224MP-F
LWK105 BJ474MP-F
JWK105 BJ104MP-F
JWK105 BJ474MP-F
JWK105 BJ105MP-F
JWK105 BJ225MP-F
AWK105 BJ224MP-F
Rated voltage [V]
25
16
10
6.3
4
Temperature
characteristics
X5R
X5R
X5R
X5R*1
*1
X5R
X5R
X5R
X5R
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
Thickness
[mm]
*3
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
【Temperature Characteristic C6 : X6S , C7 : X7S】 0.3mm thickness（P）
Part number 1
Part number 2
EWK105 C6104MP-F
LWK105 C7104MP-F
LWK105 C6224MP-F
JWK105 C7104MP-F
JWK105 C7224MP-F
JWK105 C6474MP-F
AWK105 C6224MP-F
AWK105 C6474MP-F
AWK105 C6105MP-F
AWK105 C6225MP-F
Rated voltage [V]
16
10
6.3
4
Temperature
characteristics
X6S
X7S
X6S
X7S
X7S
X6S
X6S
X6S
X6S
X6S
μ
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
150
150
Thickness
[mm]
*3
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
0.3±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
R
●107TYPE
【Temperature Characteristic BJ : X5R】 0.5mm thickness（V）
Part number 1
Part number 2
TWK107 BJ104MV-T
EWK107 BJ224MV-T
EWK107 BJ474MV-T
LWK107 BJ105MV-T
LWK107 BJ225MV-T
JWK107 BJ105MV-T
JWK107 BJ225MV-T
JWK107 BJ475MV-T
AWK107 BJ106MV-T
Rated voltage [V]
25
16
10
6.3
4
Temperature
characteristics
X5R*1
*1
X5R
*1
X5R
X5R
X5R
*1
X5R
X5R
X5R
X5R
μ
μ
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
150
150
Thickness
[mm]
*3
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
R
R
【Temperature Characteristic B7 : X7R , C6 : X6S , C7 : X7S】 0.5mm thickness（V）
Part number 1
TWK107 B7104MV-T
EWK107 B7224MV-T
EWK107 B7474MV-T
JWK107 C7105MV-T
AWK107 C7225MV-T
AWK107 C6475MV-T
PWK107 C6106MV-T
Part number 2
Rated voltage [V]
25
16
6.3
4
2.5
Temperature
characteristics
X7R
X7R
X7R
X7S
X7S
X6S
X6S
μ
μ
μ
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
150
150
150
Thickness*3
[mm]
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
0.5±0.05
Soldering
R:Reflow
W:Wave
R
R
R
R
R
R
R
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
28
14
■PARTS NUMBER
●212TYPE
【Temperature Characteristic BJ : X5R】 0.85mm thickness（D）
Part number 1
Part number 2
Rated voltage [V]
Temperature
characteristics
25
16
TWK212 BJ475[]D-T
EWK212 BJ106MD-T
LWK212 BJ475[]D-T
LWK212 BJ106MD-T
JWK212 BJ226MD-T
X5R
X5R
X5R
X5R
X5R
10
6.3
Capacitance
[F]
4.7
10
4.7
10
22
μ
μ
μ
μ
μ
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±20
±10，±20
±20
±20
10
10
10
10
10
Capacitance
tolerance [％]
tanδ
[％]
±10，±20
±10，±20
±20
±20
5
10
10
10
HTLT
Rated voltage x ％
150
150
150
150
150
Thickness*3
[mm]
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
R
【Temperature Characteristic B7 : X7R , C6 : X6S】 0.85mm thickness（D）
Part number 1
Rated voltage [V]
25
16
10
4
Temperature
characteristics
X7R
X6S
X6S
X6S
Capacitance
[F]
2.2
4.7
10
22
μ
μ
μ
μ
HTLT
Rated voltage x ％
150
150
150
150
Thickness
[mm]
*3
0.85±0.10
0.85±0.10
0.85±0.10
0.85±0.10
Soldering
R:Reflow
W:Wave
R
R
R
R
CERAMIC CAPACITORS
TWK212 B7225[]D-T
EWK212 C6475[]D-T
LWK212 C6106MD-T
AWK212 C6226MD-T
Part number 2
c_mlcc_e-E02R01
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
14
29
Multilayer Ceramic Capacitors
■PACKAGING
①Minimum Quantity
●Taped package
Thickness
Type(EIA)
□MK042(01005)
□VS042(01005)
□MK063(0201)
□WK105(0204) ※
□MK105(0402)
□VK105(0402) ※
□MK107(0603)
□WK107(0306) ※
□MR107(0603)
□MK212(0805)
□WK212(0508) ※
□MR212(0805)
□MK316(1206)
□MR316(1206)
□MK325(1210)
□MR325(1210)
□MK432(1812)
Note : ※ LW Reverse type.
mm
0.2
0.2
0.3
0.3
0.2
0.3
0.5
0.5
0.45
0.5
0.8
0.45
0.85
125
0.85
1.15
125
1.6
0.85
1.15
1.9
2.0max.
2.5
2.5
code
C, D
C
P, T
P
C
P
V
W
K
V
A
K
D
G
D
F
G
L
D
F
N
Y
M
M
Standard quantity [pcs]
Paper tape
Embossed tape
－
40000
15000
10000
20000
15000
－
10000
4000
－
4000
4000
－
－
4000
3000
－
－
3000
－
2000
－
2000
－
500（T）, 1000（P）
500
②Taping material
※No bottom tape for pressed carrier tape
●Card board carrier tape
●Embossed tape
Top tape
Top tape
Base tape
Sprocket hole
Sprocket hole
Bottom tape
Chip cavity
Base tape
Chip cavity
Chip filled
Chip
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E02R01
③Representative taping dimensions
●Paper Tape（8mm wide）
●Pressed carrier tape（ 2mm pitch）
Type(EIA)
Chip Cavity
Ａ
0.37
Ｂ
0.67
□MK063(0201)
□WK105(0204) ※
0.65
1.15
□MK105(0402) （*1 C）
□MK105(0402) （*1 P）
Note *1 Thickness, C：0.2mm ,P：0.3mm. ※ LW Reverse type.
Insertion Pitch
Ｆ
2.0±0.05
Tape Thickness
Ｔ
T1
0.45max.
0.42max.
0.4max.
0.45max.
0.3max.
0.42max.
Unit：mm
●Punched carrier tape （2mm pitch）
Type(EIA)
□MK105 (0402)
□VK105 (0402)
Ａ
Chip Cavity
Ｂ
Insertion Pitch
Ｆ
Tape Thickness
Ｔ
0.65
1.15
2.0±0.05
0.8max.
Unit：mm
●Punched carrier tape （4mm pitch）
Type(EIA)
Chip Cavity
Ａ
Ｂ
Insertion Pitch
Ｆ
□MK107(0603)
□WK107(0306) ※
1.0
1.8
□MR107(0603)
4.0±0.1
□MK212(0805)
1.65
2.4
□WK212(0508) ※
□MK316(1206)
2.0
3.6
Note：Taping size might be different depending on the size of the product. ※ LW Reverse type.
Tape Thickness
Ｔ
1.1max.
1.1max.
Unit：mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E02R01
●Embossed tape（4mm wide）
Type(EIA)
□MK042(01005)
□VS042(01005)
Ａ
Chip Cavity
Ｂ
Insertion Pitch
Ｆ
K
Tape Thickness
T
0.23
0.43
1.0±0.02
0.5max.
0.25max.
Unit：mm
●Embossed tape（8mm wide）
Type(EIA)
□WK107(0306) ※
□MK212(0805)
□MR212(0805)
□MK316(1206)
□MR316(1206)
□MK325(1210)
□MR325(1210)
Note： ※ LW Reverse type.
Chip Cavity
Ａ
1.0
Ｂ
1.8
1.65
2.4
2.0
3.6
2.8
3.6
Insertion Pitch
Ｆ
4.0±0.1
Tape Thickness
K
1.3max.
T
0.25±0.1
3.4max.
0.6max.
Unit：mm
●Embossed tape（12mm wide）
Type(EIA)
□MK432(1812)
Chip Cavity
Ａ
3.7
Ｂ
4.9
Insertion Pitch
Ｆ
8.0±0.1
Tape Thickness
K
4.0max.
T
0.6max.
Unit：mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E02R01
④Trailer and Leader
Blank portion
Chip cavity
Blank portion
Leader
100mm or more
(3.94inches or more)
160mm or more
(6.3inches or more)
Direction of tape feed
400mm or more
(15.7inches or more)
⑤Reel size
t
E
C
R
B
A
D
W
A
φ178±2.0
B
φ50min.
C
φ13.0±0.2
D
φ21.0±0.8
4mm wide tape
8mm wide tape
12mm wide tape
T
1.5max.
2.5max.
2.5max.
W
5±1.0
10±1.5
14±1.5
Unit：mm
E
2.0±0.5
R
1.0
⑥Top Tape Strength
The top tape requires a peel-off force of 0.1 to 0.7N in the direction of the arrow as illustrated below.
Pull direction
0～20°
Top tape
Base tape
⑦Bulk Cassette
The exchange of individual specification is necessary.
Please contact Taiyo Yuden sales channels.
Slider
Shutter
1.0＋0/－0.1
12±0.1
2.0＋0/－0.1
1.5＋0.1/－0
6.8±0.1
8.8±0.1
12.0±0.1
31.5＋0.2/－0
36＋0/－0.2
Connecting Port
36＋0/－0.2
110±0.7
Unit：mm
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_pack_e-E02R01
Super Low Distortion Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Multilayer Ceramic Capacitors
■RELIABILITY DATA
1.Operating Temperature Range
Temperature
Compensating（Class1）
Standard
High Frequency Type
－55 to ＋125℃
Specification
Temperature Range
B
－25 to ＋85℃
BJ
X5R
－55 to ＋85℃
B7
X7R
－55 to ＋125℃
C6
X6S
－55 to ＋105℃
C7
X7S
－55 to ＋125℃
LD(※)
X5R
－55 to ＋85℃
F
－25 to ＋85℃
F
Y5V
－30 to ＋85℃
Note: ※LD Low distortion high value multilayer ceramic capacitor
Specified
Value
High Permittivity （Class2）
2. Storage Conditions
Temperature
Compensating（Class1）
Standard
High Frequency Type
－55 to ＋125℃
Specification
Temperature Range
B
－25 to ＋85℃
BJ
X5R
－55 to ＋85℃
B7
X7R
－55 to ＋125℃
C6
X6S
－55 to ＋105℃
C7
X7S
－55 to ＋125℃
LD(※)
X5R
－55 to ＋85℃
F
－25 to ＋85℃
F
Y5V
－30 to ＋85℃
Note: ※LD Low distortion high value multilayer ceramic capacitor
Specified
Value
High Permittivity （Class2）
3. Rated Voltage
Specified
Value
Temperature
Compensating（Class1）
Standard
50VDC, 25VDC, 16VDC
High Frequency Type
50VDC, 25VDC, 16VDC
High Permittivity （Class2）
50VDC, 35VDC, 25VDC, 16VDC, 10VDC, 6.3VDC, 4VDC, 2.5VDC
4. Withstanding Voltage （Between terminals）
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
No breakdown or damage
High Permittivity （Class2）
Test
Methods and
Remarks
Class 1
Rated voltage×3
Applied voltage
Duration
Charge/discharge current
Class 2
Rated voltage×2.5
1 to 5 sec.
50mA max.
5. Insulation Resistance
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
High Permittivity （Class2） Note 1
Test
Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
10000 MΩ min.
C≦0.047μF : 10000 MΩ min.
C＞0.047μF : 500MΩ・μF
: Rated voltage
: 60±5 sec.
: 50mA max.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
6. Capacitance （Tolerance）
Specified
Value
Temperature
Compensating（Class1）
Standard
C□
U□
SL
0.2pF≦C≦5pF
0.2pF≦C≦10pF
C＞10pF
: ±0.25pF
: ±0.5pF
: ±5% or ±10%
High Frequency Type
CH
0.2pF≦C≦2pF
C＞2pF
: ±0.1pF
: ±5%
BJ, B7, C6, C7, LD(※) : ±10% or ±20%,
F : ＋80/－20%
Note: ※LD Low distortion high value multilayer ceramic capacitor
High Permittivity （Class2）
Test
Methods and
Remarks
Standard
Preconditioning
Measuring frequency
Measuring voltage Note
Bias application
Class 1
High Frequency Type
None
1ＭHz±10%
0.5 to 5Vrms
Class 2
C≦10μF
C＞10μF
Thermal treatment （at 150℃ for 1hr） Note 2
1kHz±10%
120±10Hz
1±0.2Vrms
0.5±0.1Vrms
None
7. Q or Dissipation Factor
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
High Permittivity （Class2） Note 1
C＜30pF : Q≧400＋20C
C≧30pF : Q≧1000
（C：Nominal capacitance）
Refer to detailed specification
BJ, B7, C6, C7：2.5% max.,
Class 1
High Frequency Type
None
1ＭHz±10%
1GHz
0.5 to 5Vrms
Standard
Test
Methods and
Remarks
Preconditioning
Measuring frequency
Measuring voltage Note 1
Bias application
High Frequency Type
Measuring equipment
Measuring jig
F：7% max.
Class 2
C≦10μF
C＞10μF
Thermal treatment （at 150℃ for 1hr） Note 2
1ｋHz±10%
120±10Hz
1±0.2Vrms
0.5±0.1Vrms
None
: HP4291A
: HP16192A
8. Temperature Characteristic （Without voltage application）
Temperature Characteristic ［ppm/℃］
C□ : 0
CG,CH, CJ, CK
Temperature
Compensating（Class1）
Standard
U□ : －750
SL
High Frequency Type
UJ, UK
: ＋350 to －1000
Temperature Characteristic ［ppm/℃］
C□ : 0
CH
Specified
Value
Tolerance ［ppm/℃］
G : ±30
H : ±60
J : ±120
K : ±250
Tolerance ［ppm/℃］
H : ±60
Capacitance
Reference
Temperature Range
change
temperature
±10%
20℃
－25 to ＋85℃
±15%
25℃
－55 to ＋85℃
±15%
25℃
－55 to ＋125℃
±22%
25℃
－55 to ＋105℃
±22%
25℃
－55 to ＋125℃
±15%
25℃
－55 to ＋85℃
＋30/－80%
20℃
－25 to ＋85℃
＋22/－82%
25℃
－30 to ＋85℃
distortion high value multilayer ceramic capacitor
Specification
B
X5R
B7
X7R
C6
X6S
C7
X7S
LD(※)
X5R
F
F
Y5V
Note : ※LD Low
BJ
High Permittivity （Class2）
Class 1
Capacitance at 20℃ and 85℃ shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
（C85－C20）
×106（ppm/℃）
△T＝65
C20×△T
Test
Methods and
Remarks
Class 2
Capacitance at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the following
equation.
Step
B、F
X5R、X7R、X6S、X7S、Y5V
1
Minimum operating temperature
2
20℃
25℃
3
Maximum operating temperature
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
（C－C2）
×100（%）
C2
C ：Capacitance in Step 1 or Step 3
C2 ：Capacitance in Step 2
9. Deflection
Temperature
Compensating（Class1）
Specified
Value
Standard
Appearance
Capacitance change
: No abnormality
: Within ±5% or ±0.5 pF, whichever is larger.
High Frequency Type
Appearance
Capacitance change
: No abnormality
: Within±0.5 pF
Appearance
Capacitance change
: No abnormality
: Within ±12.5%（BJ, B7, C6, C7,LD(※)）
Within ±30%（F）
Note: ※LD Low distortion high value multilayer ceramic capacitor
High Permittivity （Class2）
Multilayer Ceramic Capacitors
105 Type
The other types
Glass epoxy-resin substrate
0.8mm
1.6mm
1mm
10 sec.
※
105 Type thickness, C： 0.2mm ,P： 0.3mm.
042, 063,
Board
Thickness
Warp
Duration
Test
Methods and
Remarks
※
Capacitance measurement shall be conducted
with the board bent
10. Body Strength
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
High Permittivity （Class2）
Test
Methods and
Remarks
－
No mechanical damage.
－
High Frequency Type
Applied force
: 5N
Duration
: 10 sec.
11. Adhesive Strength of Terminal Electrodes
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
No terminal separation or its indication.
High Permittivity （Class2）
Test
Methods and
Remarks
Applied force
Duration
Multilayer Ceramic Capacitors
042, 063 Type
105 Type or more
2N
5N
30±5 sec.
12. Solderability
Specified
Value
Temperature
Compensating（Class1）
Standard
High Frequency Type
At least 95% of terminal electrode is covered by new solder.
High Permittivity （Class2）
Test
Methods and
Remarks
Solder type
Solder temperature
Duration
Eutectic solder
H60A or H63A
230±5℃
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
4±1 sec.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
13. Resistance to Soldering
Standard
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
High Frequency Type
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5%
: Initial value
: Initial value
（between terminals） : No abnormality
Temperature
Compensating（Class1）
Specified
Value
Appearance
Capacitance change
High Permittivity （Class2）
: No abnormality
: Within ±7.5%（BJ, B7, C6, C7, LD(※)）
Within ±20%（F）
Dissipation factor
: Initial value
Insulation resistance
: Initial value
Withstanding voltage
（between terminals）: No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1
Class 1
042, 063 Type
105 Type
Preconditioning
Preheating
Test
Methods and
Remarks
None
Solder temp.
Duration
Recovery
270±5℃
3±0.5 sec.
6 to 24 hrs （Standard condition） Note 5
042、063 Type
Preconditioning
Preheating
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5 min.
150℃, 1 to 2 min.
150℃, 1 to 2 min.
Solder temp.
Duration
Recovery
Class 2
105, 107, 212 Type
316, 325 Type
Thermal treatment （at 150℃ for 1 hr） Note 2
80 to 100℃, 2 to 5 min.
80 to 100℃, 5 to 10 min.
150 to 200℃, 2 to 5 min.
150 to 200℃, 5 to 10 min.
270±5℃
3±0.5 sec.
24±2 hrs （Standard condition） Note 5
14. Temperature Cycle (Thermal Shock）
Standard
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±2.5% or ±0.25pF, whichever is larger.
: Initial value
: Initial value
（between terminals） : No abnormality
High Frequency Type
Appearance
Capacitance change
Q
Insulation resistance
Withstanding voltage
: No abnormality
: Within ±0.25pF
: Initial value
: Initial value
（between terminals） : No abnormality
Temperature
Compensating（Class1）
Specified
Value
Appearance
Capacitance change
High Permittivity （Class2）
: No abnormality
: Within ±7.5% （BJ, B7, C6, C7, LD(※)）
Within ±20% （F）
Dissipation factor
: Initial value
Insulation resistance
: Initial value
Withstanding voltage
（between terminals） : No abnormality
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1
Class 1
Preconditioning
Test
Methods and
Remarks
1 cycle
Number of cycles
Recovery
Class 2
Thermal treatment （at 150℃ for 1 hr）
Note 2
None
Step
1
2
3
4
Temperature（℃）
Minimum operating temperature
Normal temperature
Maximum operating temperature
Normal temperature
Time（min.）
30±3
2 to 3
30±3
2 to 3
5 times
6 to 24 hrs （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
15. Humidity （Steady State）
Appearance
Capacitance change
Q
Standard
Temperature
Compensating（Class1）
Specified
Value
High Frequency Type
Insulation resistance
: No abnormality
: Within ±5% or ±0.5pF, whichever is larger.
: C＜10pF : Q≧200＋10C
10≦C＜30pF : Q≧275＋2.5C
C≧30pF:Q≧350（C：Nominal capacitance）
: 1000 MΩ min.
Appearance
Capacitance change
Insulation resistance
: No abnormality
: Within ±0.5pF,
: 1000 MΩ min.
Appearance
Capacitance change
High Permittivity （Class2）
: No abnormality
: Within ±12.5% （BJ, B7, C6, C7, LD(※)）
Within ±30% （F）
Dissipation factor
: 5.0% max.（BJ, B7, C6, C7, LD(※)）
11.0% max.（F）
Insulation resistance
: 50 MΩμF or 1000 MΩ whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1
Class 1
Standard
Test
Methods and
Remarks
Preconditioning
Temperature
Humidity
Duration
Recovery
Class 2
All items
Thermal treatment（ at 150℃ for 1 hr） Note 2
40±2℃
90 to 95%RH
500＋24/－0 hrs
24±2 hrs （Standard condition） Note 5
High Frequency Type
None
40±2℃
60±2℃
90 to 95%RH
500＋24/－0 hrs
6 to 24 hrs （Standard condition） Note 5
16. Humidity Loading
Appearance
Capacitance change
Q
Standard
Insulation resistance
Temperature
Compensating（Class1）
Appearance
Capacitance change
High Frequency Type
Specified
Value
: No abnormality
: Within ±7.5% or ±0.75pF, whichever is larger.
: C＜30pF：Q≧100＋10C/3
C≧30pF：Q≧200 （C：Nominal capacitance）
: 500 MΩ min.
Insulation resistance
: No abnormality
: C≦2pF：Within ±0.4 pF
C＞2pF：Within ±0.75 pF
（C：Nominal capacitance）
: 500 MΩ min.
Appearance
Capacitance change
High Permittivity （Class2）
Note 1
90 to 95%RH
500＋24/－0 hrs
Rated voltage
Class 2
All items
Voltage treatment
（Rated voltage are applied for 1 hour at 40℃） Note 3
40±2℃
90 to 95%RH
500＋24/－0 hrs
Rated voltage
50mA max.
50mA max.
6 to 24 hrs （Standard condition） Note 5
24±2 hrs（Standard condition） Note 5
Standard
Preconditioning
Test
Methods and
Remarks
Temperature
Humidity
Duration
Applied voltage
Charge/discharge
current
Recovery
: No abnormality
: Within ±12.5% （BJ, B7, C6, C7, LD(※)）
Within ±30% （F）
Dissipation factor
: 5.0% max. （BJ, B7, C6, C7, LD(※)）
11.0% max. （F）
Insulation resistance
: 25 MΩμF or 500 MΩ, whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
High Frequency Type
None
40±2℃
60±2℃
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
17. High Temperature Loading
Appearance
Capacitance change
Q
Standard
Temperature
Compensating（Class1）
Specified
Value
High Frequency Type
Insulation resistance
: No abnormality
: Within ±3% or ±0.3pF, whichever is larger.
: C＜10pF： Q≧200＋10C
10≦C＜30pF：Q≧275＋2.5C
C≧30pF： Q≧350（C：Nominal capacitance）
: 1000 MΩ min.
Appearance
Capacitance change
Insulation resistance
: No abnormality
: Within ±3% or ±0.3pF, whichever is larger.
: 1000 MΩ min.
Appearance
Capacitance change
High Permittivity （Class2）
Note 1
Maximum operating temperature
1000＋48/－0 hrs
Rated voltage×2
Class 2
BJ, LD(※), F
C6
B7, C7
Voltage treatment（Twice the rated voltage shall be applied for
1 hour at 85℃, 105℃ or 125℃） Note 3, 4
Maximum operating temperature
1000＋48/－0 hrs
Rated voltage×2 Note 4
50mA max.
50mA max.
6 to 24hr （Standard condition） Note 5
24±2 hrs （Standard condition） Note 5
Standard
Preconditioning
Test
Methods and
Remarks
Temperature
Duration
Applied voltage
Charge/discharge
current
Recovery
: No abnormality
: Within ±12.5% （BJ, B7, C6, C7, LD(※)）
Within ±30% （F）
Dissipation factor
: 5.0% max.（BJ, B7, C6, C7, LD(※)）
11.0% max.（F）
Insulation resistance
: 50 MΩμF or 1000 MΩ, whichever is smaller.
Note: ※LD Low distortion high value multilayer ceramic capacitor
Class 1
High Frequency Type
None
Note: ※LD Low distortion high value multilayer ceramic capacitor
Note 1 The figures indicate typical specifications. Please refer to individual specifications in detail.
Note 2 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at room temperature for
24±2hours.
Note 3 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in
the test conditions, and kept at room temperature for 24±2hours.
Note 4 150% of rated voltage is applicable to some items. Please refer to their specifications for further information.
Note 5 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa When there are questions concerning
measurement results, in order to provide correlation data, the test shall be conducted under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa Unless otherwise specified, all the tests are conducted under the
"standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_reli_e-E02R01
Multilayer Ceramic Capacitors , Medium-High Voltage Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Super Low Distortion Multilayer Ceramic Capacitors （CFCAPTM）
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
－55 to ＋125℃
2. Storage Temperature Range
Specified Value
－55 to ＋125℃
3. Rated Voltage
Specified Value
6.3VDC, 10VDC, 16VDC, 25VDC, 35VDC, 50VDC
4. Dielectric Withstanding Voltage （Between terminals）
Specified Value
No breakdown or damage
Test Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
: Rated voltage×3
: 1 to 5 sec.
: 50mA max.
５．Insulation Resistance
Specified Value
10000 MΩ or 500MΩμF, whichever is smaller
Test Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
: Rated voltage
: 60±5 sec.
: 50mA max.
6．Capacitance （Tolerance）
Specified Value
±10％
Test Methods and
Remarks
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
７．Dissipation Factor
Specified Value
0.1%max
Test Methods and
Remarks
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
8．Bending Strength
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Warp
Speed
Duration
Test board
Thickness
:
:
:
:
:
: No abnormality
: ±5%
1mm
0.5mm/second
10 seconds
glass epoxy resin substrate
1.6mm
Capacitance measurement shall be conducted with the board bent.
9．Adhesive Force of Terminal Electrodes
Specified Value
Terminal electrodes shall be no exfoliation or a sign of exfoliation.
Applied force
Duration
: 5N
: 30 ±5 seconds
Test Methods and
Remarks
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E02R01
10．Solderability
Specified Value
Test Methods and
Remarks
At least 95% of terminal electrode is covered by new solder.
Eutectic solder
H60A or H63A
230±5℃
Solder type
Solder temperature
Duration
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
4±1 sec.
11．Resistance to Soldering Heat
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: No abnormality
: ±2.5% max.
: Initial value
: Initial value
（between terminals） : No abnormality
Solder temp.
Duration
Preheating conditions
Measurement shall be conducted
: 270 ±5℃
: 3 ±0.5 sec.
: 80 to 100℃, 2 to 5 min. or 5 to 10 min.
150 to 200℃, 2 to 5 min. or 5 to 10 min.
: 24±2hrs under the standard condition Note1
12．Temperature Cycle （Thermal Shock）
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: No abnormality
: ±2.5% max
: Initial value
: Initial value
（between terminals）: No abnormality
Conditions for 1 cycle
Step
temperature（℃）
1
Minimum operating temperature
2
Normal temperature
3
Maximum operating temperature
4
Normal temperature
Number of cycles: 5 times
Measurement shall be conducted : 24±2hrs under the standard condition
Time（min.）
30±3 min.
2 to 3 min.
30±3 min.
2 to 3 min.
Note1
13．Humidity （Steady state）
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
±5% max
0.5% max
50MΩμF or 1000MΩ, whichever is smaller
Test Methods and
Remarks
Temperature
Humidity
Duration
Measurement shall be conducted
:
:
:
:
40±2℃
90 to 95% RH
500 ＋24/－0 hrs
24 ±2hrs under the standard condition
Note1
14．Humidity Loading
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
±7.5% max
0.5% max
25MΩμF or 500MΩ, whichever is smaller
According to JIS C 5102 clause 9.9.
Temperature
Humidity
Duration
Applied voltage
Charge/discharge current
Measurement shall be conducted
: 40±2℃
: 90 to 95% RH
: 500 ＋24/－0 hrs
: Rated voltage
: 50mA max
: 24 ±2hrs under the standard condition
Note1
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E02R01
15．High Temperature Loading
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
:
:
:
:
No abnormality
±3% max
0.35% max
50MΩμF or 1000MΩ, whichever is smaller
According to JIS C 5102 clause 9.10.
Temperature
Duration
Applied voltage
Charge/discharge current
Measurement shall be conducted
: Maximum operating temperature
: 1000 ＋48/－0 hrs
: Rated voltage x 2
: 50mA max
: 24 ±2hrs under the standard condition
Note1
Note1 Standard condition: Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted under the following
condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_CFcap_reli_e-E02R01
Multilayer Ceramic Capacitors , Super Low Distortion Multilayer Ceramic Capacitors and
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Medium-High Voltage Multilayer Ceramic Capacitor
■RELIABILITY DATA
1. Operating Temperature Range
Specified Value
X7R, X7S
X5R
B
: －55 to ＋125℃
: －55 to ＋85℃
: －25 to ＋85℃
2. Storage Temperature Range
Specified Value
X7R, X7S
X5R
B
: －55 to ＋125℃
: －55 to ＋85℃
: －25 to ＋85℃
3. Rated Voltage
Specified Value
100VDC(HMK), 250VDC(QMK), 630VDC(SMK)
4. Withstanding Voltage（Between terminals）
Specified Value
No breakdown or damage
Test Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
: Rated voltage×2.5（HMK）, Rated voltage×2（QMK）, Rated voltage×1.2（SMK）
: 1 to 5sec.
: 50mA max.
5. Insulation Resistance
Specified Value
100MΩ・μF or 10GΩ, whichever is smaller.
Test Methods and
Remarks
Applied voltage
Duration
Charge/discharge current
: Rated voltage（HMK, QMK）, 500V（SMK）
: 60±5sec.
: 50mA max.
6. Capacitance （Tolerance）
Specified Value
±10%, ±20%
Test Methods and
Remarks
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
7. Dissipation Factor
Specified Value
3.5%max（HMK）
2.5%max（QMK, SMK）
Test Methods and
Remarks
Measuring frequency
Measuring voltage
Bias application
: 1kHz±10%
: 1±0.2Vrms
: None
8. Temperature Characteristic of Capacitance
Specified Value
Test Methods and
Remarks
B
X5R
X7R
X7S
:
:
:
:
±10%（－25 to ＋85℃）
±15%（－55 to ＋85℃）
±15%（－55 to ＋125℃）
±22%（－55 to ＋125℃）
Capacitance value at each step shall be measured in thermal equilibrium, and the temperature characteristic shall be calculated from the
following equation.
Step
B
X5R、X7R、X7S
1
Minimum operating temperature
2
20℃
25℃
3
Maximum operating temperature
（C－C2）
×100（%）
C2
C : Capacitance value in Step 1 or Step 3
C2 : Capacitance value in Step 2
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E02R01
9. Deflection
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Warp
Duration
Test board
Thickness
:
:
:
:
: No abnormality
: Within±10%
1mm
10sec.
Glass epoxy-resin substrate
1.6mm
Capacitance measurement shall be conducted with the board bent.
10. Adhesive Strength of Terminal Electrodes
Specified Value
No terminal separation or its indication.
Applied force
Duration
: 5N
: 30±5sec.
Test Methods and
Remarks
11. Solderability
Specified Value
Test Methods and
Remarks
At least 95% of terminal electrode is covered by new solder
Eutectic solder
H60A or H63A
230±5℃
Solder type
Solder temperature
Duration
Lead-free solder
Sn-3.0Ag-0.5Cu
245±3℃
4±1 sec.
12. Resistance to Soldering
Specified Value
Test Methods and
Remarks
Appearance
Capacitance change
Dissipation factor
Insulation resistance
Withstanding voltage
: No abnormality
: Within±15%（HMK）, ±10%（QMK, SMK）
: Initial value
: Initial value
（between terminals） : No abnormality
Preconditioning
Solder temperature
Duration
Preheating conditions
:
:
:
:
Recovery
Thermal treatment（at 150℃ for 1hr） Note1
270±5℃
3±0.5sec.
80 to 100℃, 2 to 5 min.
150 to 200℃, 2 to 5min.
: 24±2hrs under the standard condition Note3
13. Temperature Cycle （Thermal Shock）
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
: No abnormality
: Within±15%（HMK）, ±7.5%（QMK, SMK）
: Initial value
: Initial value
Test Methods and
Remarks
Preconditioning : Thermal treatment （at 150℃ for 1hr） Note1
Conditions for 1 cycle
Step
Temperature（℃）
1
Minimum operating temperature
2
Normal temperature
3
Maximum operating temperature
4
Normal temperature
Number of cycles : 5 times
Recovery : 24±2hrs under the standard condition Note3
Time（min.）
30±3min.
2 to 3min.
30±3min.
2 to 3min.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E02R01
14. Humidity （Steady state）
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
: No abnormality
: Within±15%
: 7%max（HMK）, 5%max（QMK, SMK）.
: 25MΩμF or 1000MΩ, whichever is smaller.
Test Methods and
Remarks
Preconditioning
Temperature
Humidity
Duration
Recovery
:
:
:
:
:
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
: No abnormality
: Within±15%
: 7%max（HMK）, 5%max（QMK, SMK）.
: 10MΩμF or 500MΩ, whichever is smaller.
Test Methods and
Remarks
According to JIS 5102 clause 9.9.
Preconditioning
: Voltage treatment Note2
Temperature
: 40±2℃
Humidity
: 90 to 95%RH
Applied voltage
: Rated voltage
Charge/discharge current
: 50mA max.
Duration
: 500 ＋24/－0 hrs
Recovery
: 24±2hrs under the standard condition Note3
Thermal treatment（at 150℃ for 1hr） Note1
40±2℃
90 to 95%RH
500 ＋24/－0 hrs
24±2hrs under the standard condition Note3
15. Humidity Loading
16. High Temperature Loading
Specified Value
Appearance
Capacitance change
Dissipation factor
Insulation resistance
: No abnormality
: Within±15%
: 7%max（HMK）, 5%max（QMK, SMK）.
: 50MΩμF or 1000MΩ, whichever is smaller.
Test Methods and
Remarks
According to JIS 5102 clause 9.10.
Preconditioning
: Voltage treatment Note2
Temperature
: Maximum operating temperature
Applied voltage
: Rated voltage×2（HMK）
Rated voltage×1.5（QMK）
Rated voltage×1.2（SMK）
Charge/discharge current
: 50mA max.
Duration
: 1000 ＋24/－0 hrs
Recovery
: 24±2hrs under the standard condition Note3
Note1 Thermal treatment : Initial value shall be measured after test sample is heat-treated at 150＋0/－10℃ for an hour and kept at
room temperature for
24±2hours.
Note2 Voltage treatment : Initial value shall be measured after test sample is voltage-treated for an hour at both the temperature and voltage specified in the
test conditions, and kept at room temperature for 24±2hours.
Note3 Standard condition : Temperature: 5 to 35℃, Relative humidity: 45 to 85 % RH, Air pressure: 86 to 106kPa
When there are questions concerning measurement results, in order to provide correlation data, the test shall be conducted
under the following condition.
Temperature: 20±2℃, Relative humidity: 60 to 70 % RH, Air pressure: 86 to 106kPa
Unless otherwise specified, all the tests are conducted under the "standard condition".
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_mhv_reli_e-E02R01
High Reliability Application Multilayer Ceramic Capacitors are noted separately.
Precautions on the use of Multilayer Ceramic Capacitors
■PRECAUTIONS
1. Circuit Design
Precautions
◆Verification of operating environment, electrical rating and performance
1. A malfunction of equipment in fields such as medical, aerospace, nuclear control, etc. may cause serious harm to human life or have
severe social ramifications.
Therefore, any capacitors to be used in such equipment may require higher safety and reliability, and shall be clearly differentiated from
them used in general purpose applications.
◆Operating Voltage （Verification of Rated voltage）
1. The operating voltage for capacitors must always be their rated voltage or less.
If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages shall be the rated voltage or less.
For a circuit where an AC or a pulse voltage may be used, the sum of their peak voltages shall also be the rated voltage or less.
2. Even if an applied voltage is the rated voltage or less reliability of capacitors may be deteriorated in case that either a high frequency AC
voltage or a pulse voltage having rapid rise time is used in a circuit.
2. PCB Design
Precautions
◆Pattern configurations （Design of Land-patterns）
1. When capacitors are mounted on PCBs, the amount of solder used （size of fillet） can directly affect the capacitor performance.
Therefore, the following items must be carefully considered in the design of land patterns:
（1）Excessive solder applied can cause mechanical stresses which lead to chip breaking or cracking. Therefore, please consider
appropriate land-patterns for proper amount of solder.
（2）When more than one component are jointly soldered onto the same land, each component's soldering point shall be separated by
solder-resist.
◆Pattern configurations （Capacitor layout on PCBs）
After capacitors are mounted on boards, they can be subjected to mechanical stresses in subsequent manufacturing processes （PCB
cutting, board inspection, mounting of additional parts, assembly into the chassis, wave soldering of the boards, etc.）. For this reason, land
pattern configurations and positions of capacitors shall be carefully considered to minimize stresses.
◆Pattern configurations （Design of Land-patterns）
The following diagrams and tables show some examples of recommended land patterns to prevent excessive solder amounts.
（1）Recommended land dimensions for typical chip capacitors
Land patterns for PCBs
●Multilayer Ceramic Capacitors : Recommended land dimensions
Land pattern
（unit: mm）
Solder-resist
Wave-soldering
Chip capacitor
Type
107
212
316
325
L
1.6
2.0
3.2
3.2
C
Size
W
0.8
1.25
1.6
2.5
A
0.8 to 1.0
1.0 to 1.4
1.8 to 2.5
1.8 to 2.5
B
0.5 to 0.8
0.8 to 1.5
0.8 to 1.7
0.8 to 1.7
B
A
B
C
0.6 to 0.8
0.9 to 1.2
1.2 to 1.6
1.8 to 2.5
Chip capacitor
W
Technical
considerations
L
Reflow-soldering
Type
042
063
105
L
0.4
0.6
1.0
Size
W
0.2
0.3
0.5
A
0.15 to 0.25
0.20 to 0.30
0.45 to 0.55
B
0.15 to 0.20
0.20 to 0.30
0.40 to 0.50
C
0.15 to 0.30
0.25 to 0.40
0.45 to 0.55
Note：Recommended land size might be different according
107
212
316
1.6
2.0
3.2
0.8
1.25
1.6
0.8 to 1.0
0.8 to 1.2
1.8 to 2.5
0.6 to 0.8
0.8 to 1.2
1.0 to 1.5
0.6 to 0.8
0.9 to 1.6
1.2 to 2.0
to the allowance of the size of the product.
●LWDC: Recommended land dimensions for reflow-soldering
（unit: mm）
Type
105
107
212
L
0.52
0.8
1.25
Size
W
1.0
1.6
2.0
A
0.18 to 0.22
0.25 to 0.3
0.5 to 0.7
B
0.2 to 0.25
0.3 to 0.4
0.4 to 0.5
C
0.9 to 1.1
1.5 to 1.7
1.9 to 2.1
325
3.2
2.5
1.8 to 2.5
1.0 to 1.5
1.8 to 3.2
432
4.5
3.2
2.5 to 3.5
1.5 to 1.8
2.3 to 3.5
LWDC
W
L
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
（2）Examples of good and bad solder application
Item
Not recommended
Lead wire of component
Recommended
Solder-resist
Mixed mounting of SMD and
leaded components
Chassis
Solder (for grounding)
Solder-resist
Component placement close to
the chassis
Electrode pattern
Lead wire of component
Soldering iron
Hand-soldering of leaded
components near mounted
components
Solder-resist
Solder-resist
Horizontal component
placement
◆Pattern configurations （Capacitor layout on PCBs）
1-1. The following is examples of good and bad capacitor layouts ; capacitors shall be located to minimize any
stresses from board warp or deflection.
Items
Not recommended
Recommended
possible mechanical
Place the product at a right
angle to the direction of the
anticipated mechanical
stress.
Deflection of board
1-2. The amount of mechanical stresses given will vary depending on capacitor layout. Please refer to diagram below.
E
D
Perforation
C
A
B
Slit
Magnitude of stress
A＞B＝C＞D＞E
1-3. When PCB is split, the amount of mechanical stress on the capacitors can vary according to the method used. The following methods
are listed in order from least stressful to most stressful: push-back, slit, V-grooving, and perforation. Thus, please consider the PCB,
split methods as well as chip location.
3. Mounting
Precautions
◆Adjustment of mounting machine
1. When capacitors are mounted on PCB, excessive impact load shall not be imposed on them.
2. Maintenance and inspection of mounting machines shall be conducted periodically.
◆Selection of Adhesives
1. When chips are attached on PCBs with adhesives prior to soldering, it may cause capacitor characteristics degradation unless the
following factors are appropriately checked : size of land patterns, type of adhesive, amount applied, hardening temperature and
hardening period. Therefore, please contact us for further information.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
◆Adjustment of mounting machine
1. When the bottom dead center of a pick-up nozzle is too low, excessive force is imposed on capacitors and causes damages. To avoid
this, the following points shall be considerable.
（1）The bottom dead center of the pick-up nozzle shall be adjusted to the surface level of PCB without the board deflection.
（2）The pressure of nozzle shall be adjusted between 1 and 3 N static loads.
（3）To reduce the amount of deflection of the board caused by impact of the pick-up nozzle, supporting pins or back-up pins shall be
used on the other side of the PCB. The following diagrams show some typical examples of good and bad pick-up nozzle
placement:
Item
Improper method
Proper method
Single-sided mounting
chipping
or cracking
supporting pins
or back-up pins
Double-sided mounting
chipping
or cracking
Technical
considerations
supporting pins
or back-up pins
2. As the alignment pin is worn out, adjustment of the nozzle height can cause chipping or cracking of capacitors because of mechanical
impact on the capacitors.
To avoid this, the monitoring of the width between the alignment pins in the stopped position, maintenance, check and replacement of
the pin shall be conducted periodically.
◆Selection of Adhesives
Some adhesives may cause IR deterioration. The different shrinkage percentage of between the adhesive and the capacitors may result in
stresses on the capacitors and lead to cracking. Moreover, too little or too much adhesive applied to the board may adversely affect
components. Therefore, the following precautions shall be noted in the application of adhesives.
（1）Required adhesive characteristics
a. The adhesive shall be strong enough to hold parts on the board during the mounting & solder process.
b. The adhesive shall have sufficient strength at high temperatures.
c. The adhesive shall have good coating and thickness consistency.
d. The adhesive shall be used during its prescribed shelf life.
e. The adhesive shall harden rapidly.
f. The adhesive shall have corrosion resistance.
g. The adhesive shall have excellent insulation characteristics.
h. The adhesive shall have no emission of toxic gasses and no effect on the human body.
（2）The recommended amount of adhesives is as follows;
After capacitor are bonded
Amount adhesive
［Recommended condition］
a
a
Figure
212/316 case sizes as examples
a
0.3mm min
b
b
100 to 120μm
c
Adhesives shall not contact land
c
c
4. Soldering
Precautions
◆Selection of Flux
Since flux may have a significant effect on the performance of capacitors, it is necessary to verify the following conditions prior to use;
（1）Flux used shall be less than or equal to 0.1 wt%（ in Cl equivalent） of halogenated content. Flux having a strong acidity content shall
not be applied.
（2）When shall capacitors are soldered on boards, the amount of flux applied shall be controlled at the optimum level.
（3）When water-soluble flux is used, special care shall be taken to properly clean the boards.
◆Soldering
Temperature, time, amount of solder, etc. shall be set in accordance with their recommended conditions.
Sn-Zn solder paste can adversely affect MLCC reliability.
Please contact us prior to usage of Sn-Zn solder.
Technical
considerations
◆Selection of Flux
1-1. When too much halogenated substance（Chlorine, etc.） content is used to activate flux, or highly acidic flux is used, it may lead to
corrosion of terminal electrodes or degradation of insulation resistance on the surfaces of the capacitors.
1-2. Flux is used to increase solderability in wave soldering. However if too much flux is applied, a large amount of flux gas may be emitted
and may adversely affect the solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system.
1-3. Since the residue of water-soluble flux is easily dissolved in moisture in the air, the residues on the surfaces of capacitors in high
humidity conditions may cause a degradation of insulation resistance and reliability of the capacitors. Therefore, the cleaning
methods and the capability of the machines used shall also be considered carefully when water-soluble flux is used.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
◆Soldering
･ Ceramic chip capacitors are susceptible to thermal shock when exposed to rapid or concentrated heating or rapid cooling.
･ Therefore, the soldering must be conducted with great care so as to prevent malfunction of the components due to excessive thermal
shock.
･ Preheating : Capacitors shall be preheated sufficiently, and the temperature difference between the capacitors and solder shall be within
100 to 130℃.
･ Cooling : The temperature difference between the capacitors and cleaning process shall not be greater than 100℃.
［Reflow soldering］
【Recommended condition for Pb-free
【Recommended conditions for eutectic
soldering】
soldering】
300
300
Peak
260℃ Max.
Within 10sec.
230℃
Within 10sec.
60sec. 60sec
Min.
200 Min.
Slow cooling
100
Temperature（℃）
Temperature（℃）
Preheating
0
200
Slow
cooling
100
0
Preheating150℃ Heating above
230℃
60sec. Min.
40sec. Max.
1/2T～1/3T
Caution
①The ideal condition is to have solder mass（fillet）controlled to 1/2 to 1/3 of the
thickness of a capacitor.
②Because excessive dwell times can adversely affect solderability, soldering duration shall
be kept as close to recommended times as possible.
［Wave soldering］
【Recommended conditions for eutectic
【Recommended condition for Pb-free
soldering】
soldering】
300
Preheating
120sec. Min.
200
Slow cooling
100
0
200
120sec. Min.
Preheating
150℃
100
Solder
T
PC board
Peak
260℃ Max.
Within 10sec.
230～250℃
Within 3sec.
Temperature（℃）
Temperature（℃）
300
Capacitor
Slow
cooling
0
Caution
①Wave soldering must not be applied to capacitors designated as for reflow soldering only.
［Hand soldering］
【Recommended condition for Pb-free
【Recommended conditions for eutectic
soldering】
soldering】
400
300
200
Slow cooling
100
0
Preheating
60sec. Min.
Temperature（℃）
Temperature（℃）
300
⊿T
Slow cooling
200
Preheating
150℃ Min.
100
0
400
Peak
350℃ Max.
Within 3sec.
230～280℃
Within 3sec.
316type or less
200
0
Slow cooling
⊿T
Preheating
150℃ Min.
100
60sec. Min.
⊿T
⊿T≦150℃
Peak
280℃ Max.
Within 3sec.
300
温度（℃）
400
60sec. Min.
325type or more
⊿T
⊿T≦130℃
Caution
①Use a 50W soldering iron with a maximum tip diameter of 1.0 mm.
②The soldering iron shall not directly touch capacitors.
5. Cleaning
Precautions
Technical
considerations
◆Cleaning conditions
1. When PCBs are cleaned after capacitors mounting, please select the appropriate cleaning solution in accordance with the intended use
of the cleaning. （e.g. to remove soldering flux or other materials from the production process.）
2. Cleaning condition shall be determined after it is verified by using actual cleaning machine that the cleaning process does not affect
capacitor's characteristics.
1. The use of inappropriate cleaning solutions can cause foreign substances such as flux residue to adhere to capacitors or deteriorate
their outer coating, resulting in a degradation of the capacitor's electrical properties （especially insulation resistance）.
2. Inappropriate cleaning conditions（ insufficient or excessive cleaning） may adversely affect the performance of
the capacitors.
In the case of ultrasonic cleaning, too much power output can cause excessive vibration of PCBs which may lead
to the
cracking of capacitors or the soldered portion, or decrease the terminal electrodes' strength. Therefore, the following conditions shall
be carefully checked;
Ultrasonic output :
20 W/ℓ or less
Ultrasonic frequency :
40 kHz or less
Ultrasonic washing period : 5 min. or less
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01
6. Resin coating and mold
Precautions
1. With some type of resins, decomposition gas or chemical reaction vapor may remain inside the resin during the
hardening period or
while left under normal storage conditions resulting in the deterioration of the capacitor's performance.
2. When a resin's hardening temperature is higher than capacitor's operating temperature, the stresses generated by the excessive heat
may lead to damage or destruction of capacitors.
The use of such resins, molding materials etc. is not recommended.
7. Handling
◆Splitting of PCB
1. When PCBs are split after components mounting, care shall be taken so as not to give any stresses of deflection or twisting to the board.
2. Board separation shall not be done manually, but by using the appropriate devices.
Precautions
◆Mechanical considerations
Be careful not to subject capacitors to excessive mechanical shocks.
（1）If ceramic capacitors are dropped onto a floor or a hard surface, they shall not be used.
（2）Please be careful that the mounted components do not come in contact with or bump against other boards or
components.
8. Storage conditions
Precautions
◆Storage
1. To maintain the solderability of terminal electrodes and to keep packaging materials in good condition, care must be taken to control
temperature and humidity in the storage area. Humidity should especially be kept as low as possible.
・Recommended conditions
Ambient temperature : Below 30℃
Humidity
: Below 70% RH
The ambient temperature must be kept below 40℃. Even under ideal storage conditions, solderability of capacitor is deteriorated as
time passes, so capacitors shall be used within 6 months from the time of delivery.
・Ceramic chip capacitors shall be kept where no chlorine or sulfur exists in the air.
2. The capacitance values of high dielectric constant capacitors will gradually decrease with the passage of time, so
care shall be
taken to design circuits . Even if capacitance value decreases as time passes, it will get back to the initial value by a heat treatment at
150℃ for 1hour.
Technical
considerations
If capacitors are stored in a high temperature and humidity environment, it might rapidly cause poor solderability due to terminal oxidation and
quality loss of taping/packaging materials. For this reason, capacitors shall be used within 6 months from the time of delivery. If exceeding the
above period, please check solderability before using the capacitors.
※RCR-2335B（Safety Application Guide for fixed ceramic capacitors for use in electronic equipment）is published by JEITA.
Please check the guide regarding precautions for deflection test, soldering by spot heat, and so on.
▶ This catalog contains the typical specification only due to the limitation of space. When you consider the purchase of our products, please check our specification.
For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) .
c_mlcc_prec_e-E02R01