Maxim DG406 Improved, 16-channel/dual 8-channel, cmos analog multiplexer Datasheet

19-4729; Rev 6; 3/10
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
____________________________Features
Maxim’s redesigned DG406 and DG407 CMOS analog
multiplexers now feature guaranteed matching between
channels (8Ω, max) and flatness over the specified signal range (9Ω, max). These low on-resistance muxes
(100Ω, max) conduct equally well in either direction and
feature guaranteed low charge injection (15pC, max). In
addition, these new muxes offer low input off-leakage
current over temperature—less than 5nA at +85°C.
The DG406 is a 1 of 16 multiplexer/demultiplexer and
the DG407 is a dual 8-channel multiplexer/demultiplexer. Both muxes operate with a +5V to +30V single supply and with ±4.5V to ±20V dual supplies. ESD
protection is guaranteed to be greater than 2000V per
Method 3015.7 of MIL-STD 883. These improved muxes
are pin-compatible plug-in upgrades for the industry
standard DG406 and DG407.
♦ Pin-Compatible Plug-In Upgrade for Industry
Standard DG406/DG407
♦ Guaranteed Matching Between Channels, 8Ω (max)
♦ Guaranteed On-Resistance Flatness, 9Ω (max)
♦ Guaranteed Low Charge Injection, 15pC (max)
♦ Low On-Resistance 100Ω (max)
♦ Input Leakage, 5nA (max) at +85°C
♦ Low Power Consumption, 1.25mW (max)
♦ Rail-to-Rail Signal Handling
♦ Digital Input Controls TTL/CMOS Compatible
♦ ESD Protection >2000V per Method 3015.7
________________________Applications
Sample-and-Hold Circuits
Test Equipment
Guidance and Control Systems
Communications Systems
Data-Acquisition Systems
Audio Signal Routing
_________________Pin Configurations
Ordering Information
PART
DG406CJ+
DG406CWI+
DG406C/D
DG406DJ+
DG406EWI+
DG406DN+
DG406AK+
DG406EUI+
TEMP RANGE
PIN-PACKAGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-40°C to +85°C
28 Plastic DIP
28 Wide SO
Dice*
28 Plastic DIP
28 Wide SO
28 PLCC
28 CERDIP
28 TSSOP
Ordering Information continued at end of data sheet.
*Contact factory for dice specifications.
+Denotes a lead(Pb)-free/RoHS-compliant package.
_______________Functional Diagrams
TOP VIEW
+
V+ 1
28 D
N.C. 2
27 V-
N.C. 3
26 S8
S16 4
25 S7
S15 5
S14 6
24 S6
DG406
23 S5
S13 7
22 S4
S12 8
21 S3
S11 9
20 S2
S10 10
19 S1
S9 11
18 EN
GND 12
17 A0
N.C. 13
16 A1
A3 14
15 A2
V+
DIP/SO/TSSOP
GND
S1
S2
S3
S4
S5
S6
S7
S8
S9
S10
S11
S12
S13
S14
S15
S16
D
CMOS DECODERS/DRIVERS
A0
Pin Configurations continued at end of data sheet.
V-
A1
A2
A3
EN
DG406 16-CHANNEL SINGLE-ENDED MULTIPLEXER
Functional Diagrams continued at end of data sheet.
________________________________________________________________ Maxim Integrated Products
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
1
DG406/DG407
General Description
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
ABSOLUTE MAXIMUM RATINGS
(Voltage Referenced to V-)
V+ ............................................................................-0.3V, 44V
GND .........................................................................-0.3V, 25V
Digital Inputs, S, D (Note 1)....................(V- - 2V) to (V+ + 2V) or
30mA (whichever occurs first)
Continuous Current (any terminal) ......................................30mA
Peak Current, S or D
(pulsed at 1ms, 10% duty cycle max) ..........................100mA
Continuous Power Dissipation (TA = +70°C)
28-Pin Plastic DIP (derate 9.09mW/°C above +70°C) ..727mW
28-Pin Wide SO (derate 12.50mW/°C above +70°C) ...1000mW
28-Pin PLCC (derate 10.53mW/°C above +70°C) ........842mW
28-Pin CERDIP (derate 16.67mW/°C above +70°C)...1333mW
28-Pin TSSOP (derate 12.8mW/°C above +70°C) ......1025mW
Operating Temperature Ranges
DG406/DG407C_ ...............................................0°C to +70°C
DG406/DG407D_ ............................................-40°C to +85°C
DG406/DG407AK ..........................................-55°C to +125°C
Storage Temperature Range .............................-65°C to +150°C
Lead Temperature (excluding dice; soldering, 10s) .......+300°C
Soldering Temperature (reflow)
Plastic DIP, Wide SO, TSSOP ......................................+260°C
PLCC............................................................................+245°C
CERDIP, Dice...............................................................+240°C
Signals on S_, D_, A0, A1, A2, A3, or EN exceeding V+ or V- are clamped by internal diodes. Limit forward current to maximum current ratings.
Note 1:
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
ELECTRICAL CHARACTERISTICS—Dual Supplies
(V+ = 15V, V- = -15V, VGND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
MIN
CONDITIONS
TYP
MAX
(Note 2)
UNITS
SWITCH
Analog Signal Range
Drain-Source On-Resistance
VANALOG
(Note 3)
RDS(ON)
IS = -1.0mA,
VD = ±10V
TA = +25°C
-15
IS = -1.0mA,
VD = ±10V (Note 4)
TA = +25°C
TA = TMIN to TMAX
On-Resistance Matching
Between Channels
ΔRDS(ON)
On-Resistance Flatness
RFLAT
IS = -1.0mA,
VD = ±5V or 0V
TA = +25°C
Source-Off Leakage Current
(Note 5)
VD = +10V,
VS = ±10V,
VEN = 0V
TA = +25°C
IS(OFF)
VD = ±10V,
VS = +10V,
VEN = 0V
TA = +25°C
Drain-Off Leakage Current
(Note 5)
1.5
TA = TMIN to TMAX
TA = TMIN
to TMAX
DG406
TA = TMIN
to TMAX
DG407
TA = TMIN
to TMAX
Drain-On Leakage Current
(Note 5)
2
ID(ON)
+
IS(ON)
VD = ±10V,
VS = ±10V,
sequence
each switch
on
DG406
TA = TMIN
to TMAX
-0.5
-5
A
-50
-1
C, D
-40
A
-200
-1
C, D
-20
A
-100
-1
C, D
-40
A
-200
TA = +25°C
DG407
TA = TMIN
to TMAX
9
12
C, D
TA = +25°C
8
10
1.8
TA = +25°C
100
125
TA = TMIN to TMAX
ID(OFF)
VD = +10V,
VS = ±10V,
VEN = 0V
+15
60
-1
+0.01
V
Ω
Ω
Ω
+0.5
+5
nA
+50
+0.02
+1
+40
+200
+0.02
+1
nA
+20
+100
+0.02
+1
+40
+200
+0.02
+1
C, D
-20
+20
A
-100
+100
_______________________________________________________________________________________
nA
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
(V+ = 15V, V- = -15V, VGND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
(Note 2)
UNITS
INPUT
Input Current with
Input Voltage High
IAH
VA = 2.4V or 15V
-1.0
+1.0
µA
Input Current with
Input Voltage Low
IAL
VEN = 0V or 2.4V,
VA = 0V
-1.0
+1.0
µA
±20
30
75
0.5
1
+1
+10
V
SUPPLY
Power-Supply Range
±4.5
VEN = VA = 0V or 5.0V
Positive Supply Current
Negative Supply Current
I+
I-
VEN = 2.4V,
VA(ALL) = 0V
VEN = 2.4V,
VA(ALL) = 0V
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
16
0.075
-1
-10
µA
mA
µA
DYNAMIC
Transition Time
tTRANS
Figure 2
Break-Before-Make Interval
tOPEN
Figure 4
Enable Turn-On Time
tON(EN)
Figure 3
Enable Turn-Off Time
tOFF(EN)
Figure 3
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = +25°C
TA = TMIN to TMAX
TA = +25°C
TA = TMIN to TMAX
110
10
40
130
55
300
400
ns
ns
200
400
150
300
ns
ns
CL = 1.0nF,
VS = 0V,
RS = 0Ω, Figure 5
TA = +25°C
2
VISO
VEN = 0V,
RL = 1kΩ,
f = 100kHz, Figure 6
TA = +25°C
-69
dB
Crosstalk Between Channels
VCT
VEN = 2.4V,
f = 100kHz,
VGEN = 1VP-P,
RL = 1kΩ, Figure 7
TA = +25°C
-92
dB
Logic Input Capacitance
CIN
f = 1MHz
TA = +25°C
8
pF
Source-Off Capacitance
CS(OFF)
f = 1MHz,
VEN = VS = 0V,
Figure 8
TA = +25°C
8
pF
Charge Injection
(Note 3)
Q
Off-Isolation
(Note 6)
Drain-Off Capacitance
Drain-Source On
Capacitance
CD(OFF)
CD(ON)
+
CS(ON)
f = 1MHz,
VEN = 0.8V,
VD = 0V,
Figure 8
f = 1MHz,
VEN = 2.4V,
VD = 0V,
Figure 8
DG406
pC
130
TA = +25°C
DG407
pF
65
DG406
140
TA = +25°C
DG407
15
pF
70
_______________________________________________________________________________________
3
DG406/DG407
ELECTRICAL CHARACTERISTICS—Dual Supplies (continued)
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
ELECTRICAL CHARACTERISTICS—Single Supply
(V+ = 12V, V- = 0V, VGND = 0V, VAH = +2.4V, VAL = +0.8V, TA = TMIN to TMAX, unless otherwise noted.)
PARAMETER
SYMBOL
CONDITIONS
MIN
TYP
MAX
(Note 2)
UNITS
SWITCH
Analog Signal Range
VANALOG
(Note 3)
0
12
V
Drain-Source On-Resistance
RDS(ON)
IS = -1.0mA
VD = 3V or 10V
TA = +25°C
120
175
Ω
TA = +25°C
130
450
ns
DYNAMIC
Transition Time
(Note 3)
tTRANS
VS1 = 8V,
VS16 = 0V,
VA = 0V,
Figure 2
Enable Turn-On Time
(Note 3)
tON(EN)
VAL = 0V,
VS1 = 5V,
Figure 3
TA = +25°C
105
600
ns
Enable Turn-Off Time
(Note 3)
tOFF(EN)
VAL = 0V,
VS1 = 5V,
Figure 3
TA = +25°C
80
300
ns
CL = 1.0nF,
VS1 = 0V,
RS = 0Ω
TA = +25°C
2
10
pC
Charge Injection
(Note 3)
Q
Note 2: The algebraic convention where the most negative value is a minimum and the most positive value a maximum is used in
this data sheet.
Note 3: Guaranteed by design.
Note 4: ΔRON = RON(MAX) - RON(MIN). On-resistance match between channels and flatness are guaranteed only with specified
voltages. Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured at
the extremes of the specified analog signal range.
Note 5: Leakage parameters are 100% tested at the maximum-rated hot temperature and guaranteed by correlation at +25°C.
Note 6: Off-isolation = 20log VD/VS, where VD = output and VS = input to off switch.
4
_______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
ON-RESISTANCE vs. VD
(SINGLE SUPPLY)
ON-RESISTANCE vs. VD AND
TEMPERATURE (DUAL SUPPLIES)
140
±5V
V+ = 15V
V- = -15V
400
100
360
320
80
±15V
+85°C
60
+25°C
-55°C
40
±20V
40
5V
240
200
160
10V
120
20
20
-10
-5
0
5
10
15
20
-15
-10
-5
VD (V)
0
5
10
0
15
5
10
V+ = 15V
V- = -15V
100
1000
DG406/7 TOC-05
1000
DG406/7 TOC-04
V+ = 15V
V- = 0V
20
ON LEAKAGE vs. TEMPERATURE
OFF LEAKAGE vs. TEMPERATURE
160
15
VD (V)
VD (V)
ON-RESISTANCE vs. VD AND
TEMPERATURE (SINGLE SUPPLY)
140
20V
40
0
-15
15V
80
DG406/7 TOC-06
0
-20
V+ = 15V
V- = -15V
100
+125°C
+25°C
80
-55°C
60
10
OFF LEAKAGE (nA)
+85°C
100
ON LEAKAGE (nA)
120
1
ICOM (ON)
0.1
0
5
10
15
0.1
ICOM (ON)
0.001
0.0001
0.0001
-55 -35 -15
VD (V)
5
25 45
65
-55 -35 -15
85 105 125
85 105 125
100
I+
10
I+, I- (μA)
V+ = 15V
V- = -15V
0
V+ = 12V
V- = 0V
DG406/7 TOC-08
20
-10
65
SUPPLY CURRENT vs. TEMPERATURE
CHARGE INJECTION vs. VD
30
10
25 45
5
TEMPERATURE (°C)
TEMPERATURE (°C)
DG406/7 TOC-07
0
1
INO (OFF)
0.001
20
10
0.01
0.01
40
Qj (pC)
rDS (ON) (Ω)
280
rDS (ON) (Ω)
±10V
60
+125°C
80
rDS (ON) (Ω)
rDS (ON) (Ω)
120
100
DG406/7 TOC-03
120
DG406/7 TOC-01
160
DG406/7 TOC-02
ON-RESISTANCE vs. VD
(DUAL SUPPLIES)
1
0.1
I0.01
-20
V+ = +15V
V- = -15V
VEN = VA = 0V, 4.5V
0.001
-30
-15
-10
-5
0
VD (V)
5
10
15
-55 -35 -15
5
25 45
65
85 105 125
TEMPERATURE (°C)
_______________________________________________________________________________________
5
DG406/DG407
__________________________________________Typical Operating Characteristics
(TA = +25°C, unless otherwise noted.)
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
_____________________________________________________________Pin Descriptions
DG406
PIN
NAME
DG407
PIN
NAME
1
V+
Positive Supply Voltage Input
1
V+
Positive Supply Voltage Input
2, 3, 13
N.C.
No Connection. Not internally
connected.
2
DB
Bidirectional Output B
4–11
S16–S9
3, 13, 14
N.C.
12
GND
4–11
S8B–S1B
14–17
A3–A0
12
GND
18
EN
15, 16, 17
A2, A1, A0
19–26
S1–S8
18
EN
27
V-
Negative Supply Voltage Input
19–26
S1A–S8A
28
D
Bidirectional Output
27
V-
Negative Supply Voltage Input
28
DA
Bidirectional Output A
FUNCTION
Bidirectional Analog Inputs
Ground
Address Inputs
Enable Inputs
Bidirectional Analog Inputs
__________Applications Information
Operation with Supply Voltages
Other than ±15V
FUNCTION
No Connection. Not internally
connected.
Bidirectional Analog Inputs
Ground
Address Inputs
Enable Input
Bidirectional Analog Inputs
signal range to 1V above V+ and 1V below V-, but low
switch resistance and low leakage characteristics are
unaffected. Device operation is unchanged, and the
difference between V+ and V- should not exceed +44V.
Using supply voltages other than ±15V reduces the
analog signal range. The DG406/DG407 switches operate with ±4.5V to ±20V bipolar supplies or with a +5V to
+30V single supply; connect V- to GND when operating
with a single supply. Also, both device types can operate with unbalanced supplies such as +24V and
-5V. The Typical Operating Characteristics graphs
show typical on-resistance with 20V, 15V, 10V, and 5V
supplies. (Switching times increase by a factor of two
or more for operation at 5V.)
V+
S
D
Overvoltage Protection
Proper power-supply sequencing is recommended for
all CMOS devices. Do not exceed the absolute maximum ratings because stresses beyond the listed ratings may cause permanent damage to the devices.
Always sequence V+ on first, then V-, followed by the
logic inputs and analog signals. If power-supply
sequencing is not possible, add two small signal
diodes in series with supply pins for overvoltage protection (Figure 1). Adding diodes reduces the analog
6
Vg
V-
Figure 1. Overvoltage Protection Using External Blocking
Diodes
_______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
+15V
V+
±10V
S1
A0
A1
S2-S15
A2
DG406
A3
S16
EN
+10V
D
GND
VOUT
V-
LOGIC
INPUT
50%
35pF
50Ω
0V
300Ω
+15V
-15V
VS1
V+
A1
SWITCH
OUTPUT
VOUT
±10V
S1B
A0
+10V
tTRANS
DB
GND
tTRANS
ON
VOUT
V-
50Ω
0V
VS16
S8B
EN
90%
90%
DG407 S1A-S8A
A2
tR < 20ns
tF < 20ns
+3V
35pF
300Ω
-15V
Figure 2. Transition Time
+15V
V+
EN
S1
A0
-5V
S2-S16
A1
DG406
A2
A3
D
GND
50Ω
VOUT
V-
35pF
1kΩ
LOGIC
INPUT
V+
S1B
-5V
90%
VOUT
DG407
A2
50Ω
10%
SWITCH
OUTPUT
S1A-S16A
S2B-S16B,
DA
A1
tOFF(EN)
0V
+15V
A0
50%
0V
tON(EN)
-15V
EN
tR < 20ns
tF < 20ns
+3V
DB
GND
VOUT
V1kΩ
35pF
-15V
Figure 3. Enable Switching Time
_______________________________________________________________________________________
7
DG406/DG407
______________________________________________Test Circuits/Timing Diagrams
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
_________________________________Test Circuits/Timing Diagrams (continued)
+15V
+2.4V
V+
EN
A0
S1-S16
+5V
tR < 20ns
tF < 20ns
+3V
LOGIC
INPUT
50%
0V
A1
A2
VOUT
DG406
80%
A3
D
GND
SWITCH
OUTPUT
VOUT
V-
35pF
tOPEN
0V
300Ω
50Ω
-15V
Figure 4. Break-Before-Make Interval
+15V
RS
S1-S16
V+
LOGIC
INPUT
EN
VS
CHANNEL
SELECT
+3V
OFF
ON
OFF
0V
A0
D
A1
VOUT
DG406
A2
A3
CL = 1000nF
GND
V-
ΔVOUT
VOUT
ΔVOUT IS THE MEASURED VOLTAGE DUE TO CHARGE TRANSFER
ERROR Q WHEN THE CHANNEL TURNS OFF.
-15V
Q = CL = ΔVOUT
Figure 5. Charge Injection
8
_______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
+15V
VOUT
VIN
S1
RS = 50Ω
10nF
10nF
+15V
V+
RL =
1kΩ
S16
V+
S1
S2
S16
A0
D
DG406
A1
VOUT
RS = 50Ω
RL = 1kΩ
A2
A0
DG406
COM
EN
V-
A1
A2
A3
GND
EN
A3
GND
V-
10nF
-15V
OFF ISOLATION = 20log
10nF
VOUT
VIN
CROSSTALK = 20log
Figure 6. Off-Isolation
-15V
VOUT
VIN
Figure 7. Crosstalk
+15V
V+
A3
CHANNEL
SELECT
S1
Meter
A2
DG406
A1
S16
A0
Impedance
Analyzer
D
GND
EN
V-
f = 1MHz
-15V
Figure 8. Source/Drain Capacitance
_______________________________________________________________________________________
9
DG406/DG407
_________________________________Test Circuits/Timing Diagrams (continued)
________Pin Configurations/Functional Diagrams/Truth Tables (continued)
TOP VIEW
V+ 1
28 DA
DB 2
27 V-
N.C. 3
26 S8A
S8B 4
25 S7A
S7B 5
24 S6A
DG407
S6B 6
23 S5A
S5B 7
22 S4A
S4B 8
21 S3A
S3B 9
20 S2A
S2B 10
19 S1A
S1B 11
18 EN
GND 12
17 A0
N.C. 13
16 A1
N.C. 14
15 A2
DB
V+
DA
1
28 27 26
S7B
5
25
S7A
S6B
6
24
S6A
S5B
7
23
S5A
DG407
22
S4A
9
21
S3A
S2B
10
20
S2A
S1B
11
19
S1A
18
A0
A2
16 17
EN
8
S3B
A1
S4B
N.C.
A1
A0
EN
X
0
0
0
0
0
0
0
0
1
1
1
1
1
1
1
1
X
0
0
0
0
1
1
1
1
0
0
0
0
1
1
1
1
X
0
0
1
1
0
0
1
1
0
0
1
1
0
0
1
1
X
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
None
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
S8A
N.C.
2
V-
S8B
3
N.C.
A2
LOGIC “0” VAL ≤ 0.8V, LOGIC “1” = VAH ≥ 2.4V
4
12 13 14 15
A3
DG406
DIP/SO
GND
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
A2
A1
A0
EN
X
0
0
0
0
1
1
1
1
X
0
0
1
1
0
0
1
1
X
0
1
0
1
0
1
0
1
0
1
1
1
1
1
1
1
1
None
1
2
3
4
5
6
7
8
DG407
LOGIC “0” VAL ≤ 0.8V, LOGIC “1” = VAH ≥ 2.4V
PLCC
N.C. = NO INTERNAL CONNECTION
10
______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
_Ordering Information (continued)
PART
V+
V-
DG407CJ+
GND
S1A
S2A
S3A
S4A
S5A
S6A
S7A
S8A
S1B
S2B
S3B
S4B
S5B
S6B
S7B
S8B
DA
DG407CWI+
DG407C/D+
DG407DJ+
DG407EWI+
DG407DN+
DG407AK
DG407EUI+
TEMP RANGE
0°C to +70°C
0°C to +70°C
0°C to +70°C
-40°C to +85°C
-40°C to +85°C
-40°C to +85°C
-55°C to +125°C
-40°C to +85°C
PIN-PACKAGE
28 Plastic DIP
28 Wide SO
Dice*
28 Plastic DIP
28 Wide SO
28 PLCC
28 CERDIP
28 TSSOP
*Contact factory for dice specifications.
+Denotes a lead(Pb)-free/RoHS-compliant package.
DB
Package Information
CMOS DECODERS/DRIVERS
A0
A1
A2
EN
DG407 8-CHANNEL DIFFERENTIAL MULTIPLEXER
For the latest package outline information and land patterns,
go to www.maxim-ic.com/packages. Note that a “+”, “#”, or
“-” in the package code indicates RoHS status only. Package
drawings may show a different suffix character, but the drawing
pertains to the package regardless of RoHS status.
PACKAGE TYPE
PACKAGE CODE
DOCUMENT NO.
28 PDIP
P28+3
21-0044
28 Wide SO
W28+6
21-0042
28 PLCC
Q28+4
21-0049
28 TSSOP
U28+2
21-0066
28 CERDIP
J28+2
21-0046
______________________________________________________________________________________
11
DG406/DG407
__Functional Diagrams (continued)
DG406/DG407
Improved, 16-Channel/Dual 8-Channel,
CMOS Analog Multiplexers
__________________________________________________________Chip Topographies
DG406
EN
A0
A1
A2
DG407
A3
N.C.
EN
A0
A1
A2
N.C. N.C.
0.184"
(4.67mm)
0.184"
(4.67mm)
GND
GND
S1
S9
S1A
S1B
S2
S10
S2A
S2B
S3
S11
S3A
S3B
S4
S12
S4A
S4B
S5
S13
S5A
S5B
S6
S14
S6A
S6B
S7
S15
S7A
S7B
S8
S16
S8A
S8B
N.C.
V-
D
V+
DB
V-
0.078"
(1.98mm)
DA
V+
0.078"
(1.98mm)
N.C. = NO INTERNAL CONNECTION
SUBSTRATE IS INTERNALLY CONNECTED TO V+
12
SUBSTRATE IS INTERNALLY CONNECTED TO V+
______________________________________________________________________________________
Improved, 16-Channel/Dual 8-Channel,
High-Performance, CMOS Analog Multiplexers
REVISION
NUMBER
REVISION
DATE
6
3/10
DESCRIPTION
Updated the minimum limit of the single supply range.
Added the soldering temperature of all packages to the Absolute Maximum Ratings.
PAGES
CHANGED
1, 6
2
Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are
implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.
Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 13
© 2010 Maxim Integrated Products
Maxim is a registered trademark of Maxim Integrated Products, Inc.
DG406/DG407
Revision History
Similar pages