DX ELECTRIC DOUBLE LAYER CAPACITORS 5.5V Miniaturized Standard Capacitor GREEN CAP 70℃ Smaller and lighter than Series DB. 5mm tall. Max. thin profile (H-shaped). Miniaturized but can encase up to 0.47F in 11.5×5mm case, and 1.5F in 19.0×20.5mm case. Marking color:White print on an indigo sleeve ■ SPECIFICATIONS Item Performance Category Temperature Range 25℃~+70℃ 25℃~+70℃ Tolerance at rated capacitance 20%~+80% Rated capacitance (F) Internal resistance () Internal resistance at 1 kHz 0.047 120 0.1 75 0.22 75 0.33 75 0.47 75 (11.5) 0.47 75 ((19.0) 1.0 30 Characteristics at high and low temperature Percentage of capacitance change Internal resistance Within ±30% of the value at 20℃ Less than five times of the value at 20 20℃ Endurance (70℃) Test time Percentage of capacitance change Internal resistance 1000 hours Within 30% of the initial measured value Less than four times of the initial specified value Shelf life (70℃) Test time:1000 hours; Same as endurance. Applicable standards Conforms to JIS C5160-1 2009 (IEC 62391-1 2006) ■ OUTLINE DRAWING Unit:mm Note Part numbering system (example : 5.5V0.1F) DB Series code ─ 1.5 30 5R5 □ 104 □ Rated voltage symbol Terminal code Rated capacitance symbol Additional symbol U Part number is refer to below table. Do not apply external force to products or terminals as stress such as twisting, bending, pushing, or falling of such products or terminals may remove the terminals, resulting in an open/short circuit or liquid leakage. Avoid applying excessive heat to capacitors during heating of an adhesive curing oven. For details, refer to the precautions in use of DYNACAP. ■ STANDARD RATINGS Max. operating voltage (V) Rated capacitance (F) 5.5 0.047 5.5 0.1 5.5 5.5 5.5 0.22 0.33 0.47 ELNA Parts No. DL (mm) DX-5R5V473U 11.513.0 DX-5R5H473U 11.55.0 DX-5R5V104U 11.513.0 DX-5R5H104U 11.55.0 DX-5R5V224U 11.513.0 DX-5R5H224U 11.55.0 DX-5R5V334U 11.513.0 DX-5R5H334U 11.55.0 DX-5R5V474SU 11.513.0 DX-5R5H474SU 11.55.0 DX-5R5V474U 19.020.5 5.5 1.0 DX-5R5V105U 19.020.5 5.5 1.5 DX-5R5V155U 19.020.5 33 NOTE Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use.