UNISONIC TECHNOLOGIES CO., LTD BYR79 DIODE Preliminary ULTRA FAST-RECOVERY RECTIFIER DIODE DESCRIPTION The UTC BYR79 is a rectifier diode providing the designers with ultra-fast switching and low switching loss. It features low forward voltage drop, ultra fast reverse recovery times with very low stored charge and soft-recovery characteristic. The UTC BYR79 is suitable for switched-mode power supplies, SRPS and high-frequency circuits. FEATURES * Low Switching Loss * Low Forward Volt Drop * Ultra-Fast Switching * Soft Recovery Characteristic * Low Thermal Resistance SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free BYR79L-6-TA2-T BYR79G-6-TA2-T Note: Pin Assignment: A: Anode K: Cathode Package TO-220-2 Pin Assignment 1 2 K A Packing Tube MARKING www.unisonic.com.tw Copyright © 2015 Unisonic Technologies Co., Ltd 1 of 3 QW-R601-028.d BYR79 DIODE Preliminary ABSOLUTE MAXIMUM RATINGS PARAMETER Peak Repetitive Reverse Voltage Crest Working Reverse Voltage Continuous Reverse Voltage SYMBOL VRRM VRWM VR Average Forward Current IF(AV) Repetitive Peak Forward Current IFRM Non-Repetitive Peak Forward Current. IFSM CONDITIONS RATINGS 600 600 600 UNIT V V V 15 A 30 A 130 A Square waveform; δ=0.5; Tmb≦108°C t=25μs; square waveform; δ =0.5; Tmb≦108°C t=10ms;sinusoidal waveform 143 Junction Temperature TJ 150 Storage Temperature TSTG -40 ~ +150 Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. A °C °C THERMAL DATA PARAMETER Junction to Ambient Junction to Tab t=8.3ms;sinusoidal waveform SYMBOL θJA θJB RATINGS 60 2.0 UNIT K/W K/W ELECTRICAL CHARACTERISTICS (TJ =25°C, unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN TYP MAX UNIT IF =15A, TJ =150°C 1.0 1.2 V Forward Voltage VF 1.17 1.38 V IF =15A, TJ =25°C VR=600V, 5 50 µA Reverse Current IR 0.2 0.8 mA VR=600V, TJ=100°C Reverse Recovery Charge Qr IF =2A to VR ≥30V, dIF/dt =20A/μs, TJ=25°C 40 70 nC Reverse Recovery Time tRR IF=10A to VR ≥30V, dIF/dt=100A/μs, TJ=25°C 50 60 ns Note: Measured under pulse conditions to avoid excessive dissipation. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R601-028.d BYR79 DIODE Preliminary TYPICAL CHARACTERISTICS IF IF dIF dIt tRR time Qr 10 100 IR Definition of tRR and Qr UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R601-028.d