CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS PXA TM NPCAP Surface Mount - Series PXE P40 ・Super low ESR, impedance and high heat resistance have been obtained by using conductive polymer as electrolyte ・Rated voltage range : 2.5 to 25Vdc, case size range : φ4×5.2L toφ10×12.2L ・Suitable for DC-DC converters, voltage regulators and decoupling applications used on computer motherboards etc. ・Solvent resistant type (see PRECAUTIONS AND GUIDELINES) ・RoHS Compliant ・Halogen Free Lower ESR PXA ◆SPECIFICATIONS Items Characteristics Category Temperature Range Rated Voltage Range Capacitance Tolerance Surge Voltage Leakage Current Dissipation Factor (tanδ) Low Temperature Characteristics (Max. Impedance Ratio) Endurance -55 to +105℃ 2.5 to 25Vdc ±20% (M) Rated voltage×1.15 (Rated voltage 2.5 to 20Vdc, 25Vdc) / Rated voltage×1.00 (Rated voltage 23Vdc) Shall not exceed values shown in STANDARD RATINGS. 0.12 max. (at 20℃, 120Hz) (at 105℃) (at 20℃ after 2 minutes) (at 20℃, 120Hz) Z(-25℃)/Z(+20℃)≦1.15 Z(-55℃)/Z(+20℃)≦1.25 (at 100kHz) The following specifications shall be satisfied when the capacitors are restored to 20℃ after the rated voltage is applied for 15,000 hours (F45 : 3,000 hours) at 105℃. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The following specifications shall be satisfied when the capacitors are restored to 20℃ after subjecting them to the DC rated voltage at 60℃, 90 to 95% RH for 1,000 hours(F45 : 500 hours). Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value The capacitors shall be subjected to 1,000 cycles each consisting of charge with the surge voltage specified at 105℃ for 30 seconds through a protective resistor(R=1kΩ) and discharge for 5 minutes 30 seconds. Appearance No significant damage Capacitance change ≦±20% of the initial value D.F. (tanδ) ≦150% of the initial specified value ESR ≦150% of the initial specified value Leakage current ≦The initial specified value 0.5% per 1,000 hours maximum (Confidence level 60% at 105℃) Bias Humidity Surge Voltage Failure Rate *Note : If any doubt arises, measure the leakage current after the following voltage treatment. Voltage treatment : DC rated voltage is applied to the capacitors for 120 minutes at 105℃. ◆DIMENSIONS [mm] Code : A Size code D55 E60 F45 F55 F60 H70 HC0 J80 JC0 W P C±0.2 B±0.2 φD±0.5 ●Terminal ◆MARKING 0.3max. A±0.2 L±0.3 (Note) Note : L+0.1/-0.2 for F45 L±0.5 for HC0 and JC0 φD 4 5 6.3 6.3 6.3 8 8 10 10 L A B C 5.2 4.3 4.3 5.1 5.7 5.3 5.3 5.9 4.4 6.6 6.6 7.2 5.2 6.6 6.6 7.2 5.7 6.6 6.6 7.2 6.7 8.3 8.3 9.0 12.0 8.3 8.3 9.0 7.7 10.3 10.3 11.0 12.2 10.3 10.3 11.0 W 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.5 to 0.8 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 0.7 to 1.1 P 1.0 1.4 1.9 1.9 1.9 3.1 3.1 4.5 4.5 EX) 16V39µF A15L 39 16V ◆PART NUMBERING SYSTEM 1 2 3 4 A PXA 5 6 7 8 9 10 A RA 11 12 13 14 M 15 16 17 18 G Supplement code Size code Capacitance tolerance code Capacitance code (ex. 10µF:100,100µF:101) Taping code Terminal code Voltage code (ex. 6.3V:6R3,10V:100) Series code Category Please refer to "Product code guide (conductive polymer type)" Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 42 CAT. No. E1001Q CONDUCTIVE POLYMER ALUMINUM SOLID CAPACITORS TM NPCAP Surface Mount PXASeries - ◆STANDARD RATINGS WV Cap (Vdc) (µF) Leakage Rated ripple ESR current Size current (µA max./ (mΩ max./ 20℃, code (mArms/105℃, 100k to 300kHz) after 100kHz) 2 min.) 220 220 560 2.5 680 1,000 1,500 33 100 100 120 150 150 150 4 220 330 470 560 680 820 1,200 22 47 68 82 82 82 100 100 100 6.3 100 120 150 220 330 390 470 470 680 820 F55 F60 H70 HC0 J80 JC0 D55 F55 F60 F45 E60 F55 F60 H70 H70 J80 HC0 J80 JC0 JC0 D55 E60 F60 F45 F55 F60 E60 F45 F55 F60 F60 H70 H70 J80 HC0 HC0 J80 JC0 JC0 110 110 280 340 500 750 66.0 80.0 80.0 240 120 120 120 176 264 376 448 544 656 960 69.3 59.2 85.6 258 103 103 126 315 126 126 151 189 277 415 491 592 592 856 1,030 25 25 23 12 19 10 200 26 26 38 30 26 26 25 25 20 12 20 10 10 200 35 27 40 27 27 35 40 27 27 27 25 25 20 12 12 20 10 10 2,500 2,500 3,100 4,770 4,240 5,500 740 2,450 2,450 1,710 1,490 2,450 2,450 3,020 3,020 4,130 4,770 4,130 5,500 5,500 740 1,380 2,400 1,670 2,400 2,400 1,380 1,670 2,400 2,400 2,400 3,020 3,020 4,130 4,770 4,770 4,130 5,500 5,500 WV Cap (Vdc) (µF) Part No. APXA2R5ARA221MF55G APXA2R5ARA221MF60G APXA2R5ARA561MH70G APXA2R5ARA681MHC0G APXA2R5ARA102MJ80G APXA2R5ARA152MJC0G APXA4R0ARA330MD55G APXA4R0ARA101MF55G APXA4R0ARA101MF60G APXA4R0ARA121MF45G APXA4R0ARA151ME60G APXA4R0ARA151MF55G APXA4R0ARA151MF60G APXA4R0ARA221MH70G APXA4R0ARA331MH70G APXA4R0ARA471MJ80G APXA4R0ARA561MHC0G APXA4R0ARA681MJ80G APXA4R0ARA821MJC0G APXA4R0ARA122MJC0G APXA6R3ARA220MD55G APXA6R3ARA470ME60G APXA6R3ARA680MF60G APXA6R3ARA820MF45G APXA6R3ARA820MF55G APXA6R3ARA820MF60G APXA6R3ARA101ME60G APXA6R3ARA101MF45G APXA6R3ARA101MF55G APXA6R3ARA101MF60G APXA6R3ARA121MF60G APXA6R3ARA151MH70G APXA6R3ARA221MH70G APXA6R3ARA331MJ80G APXA6R3ARA391MHC0G APXA6R3ARA471MHC0G APXA6R3ARA471MJ80G APXA6R3ARA681MJC0G APXA6R3ARA821MJC0G 10 16 20 23 25 4.7 6.8 10 15 33 47 47 47 56 56 120 150 270 270 330 330 470 560 3.3 22 22 33 39 39 82 150 180 180 220 330 15 22 22 39 47 82 150 15 10 22 39 Leakage Rated ripple ESR current Size current (µA max./ (mΩ max./ 20℃, code (mArms/105℃, 100k to 300kHz) after 100kHz) 2 min.) D55 D55 D55 D55 E60 E60 F45 F60 F55 F60 H70 H70 HC0 J80 HC0 J80 JC0 JC0 D55 E60 F45 F60 F55 F60 H70 J80 HC0 J80 JC0 JC0 F45 F55 F60 H70 H70 J80 JC0 F45 F60 H70 J80 23.5 34.0 50.0 75.0 66.0 94.0 235 94.0 112 112 240 300 540 540 660 660 940 1,120 26.4 70.4 176 105 124 124 262 480 576 576 704 1,050 150 88.0 88.0 156 188 328 600 172 125 275 487 240 240 220 200 40 40 41 31 31 31 27 27 14 24 14 24 12 12 260 45 45 37 37 37 30 26 16 26 14 14 57 50 50 45 45 40 20 57 65 50 45 670 670 700 740 1,270 1,270 1,560 2,250 2,250 2,250 2,800 2,800 4,420 3,770 4,420 3,770 5,300 5,300 660 1,210 1,490 2,050 2,050 2,050 2,700 3,430 4,360 3,430 5,050 5,050 1,300 1,650 1,650 2,000 2,000 2,500 4,320 1,300 1,500 1,800 2,100 Part No. APXA100ARA4R7MD55G APXA100ARA6R8MD55G APXA100ARA100MD55G APXA100ARA150MD55G APXA100ARA330ME60G APXA100ARA470ME60G APXA100ARA470MF45G APXA100ARA470MF60G APXA100ARA560MF55G APXA100ARA560MF60G APXA100ARA121MH70G APXA100ARA151MH70G APXA100ARA271MHC0G APXA100ARA271MJ80G APXA100ARA331MHC0G APXA100ARA331MJ80G APXA100ARA471MJC0G APXA100ARA561MJC0G APXA160ARA3R3MD55G APXA160ARA220ME60G APXA160ARA220MF45G APXA160ARA330MF60G APXA160ARA390MF55G APXA160ARA390MF60G APXA160ARA820MH70G APXA160ARA151MJ80G APXA160ARA181MHC0G APXA160ARA181MJ80G APXA160ARA221MJC0G APXA160ARA331MJC0G APXA200ARA150MF45G APXA200ARA220MF55G APXA200ARA220MF60G APXA200ARA390MH70G APXA200ARA470MH70G APXA200ARA820MJ80G APXA200ARA151MJC0G APXA230ARA150MF45G APXA250ARA100MF60G APXA250ARA220MH70G APXA250ARA390MJ80G Product specifications in this catalog are subject to change without notice.Request our product specifications before purchase and/or use. Please use our products based on the information contained in this catalog and product specifications. 43 CAT. No. E1001Q