UNISONIC TECHNOLOGIES CO., LTD BTB16 Preliminary TRIAC 16A TRIACS DESCRIPTION The UTC BTB16 is a 16A triacs which can be operated in 4 quadrants, it uses UTC’s advanced technology to provide customers with high commutation performances and voltage insulated tab, etc. The UTC BTB16 is suitable for AC switching application and phase control application such as fan speed and temperature modulation control, lighting control and static switching relay, either in through-hole or surface-mount packages. SYMBOL ORDERING INFORMATION Ordering Number Lead Free Halogen Free BTB16L-x-x-TA3-T BTB16G-x-x-TA3-T TO-220 Packing Tube SENSITIVITY AND TYPE PART NUMBER B C ◎: Available Pin Assignment 1 2 3 MT1 MT2 G Package VOLTAGE 600V ◎ ◎ 800V ◎ SENSITIVITY TYPE 50mA 25mA STANDARD STANDARD MARKING INFORMATION PACKAGE MARKING TO-220 www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 3 QW-R401-044.b BTB16 Preliminary TRIAC ABSOLUTE MAXIMUM RATINGS PARAMETER RMS On-State Current (Full Sine Wave) TC=86°C Non Repetitive Surge Peak F=50 Hz t=20ms On-State Current (Full F=60 Hz t=16.7ms Cycle, TJ initial=25°C) SYMBOL IT(RMS) RATINGS 16 UNIT A 160 A 168 A ITSM 2 I t Value for Fusing tP=10ms It 144 A2 s Critical Rate of Rise of On-State Current IG=2xIGT, F=120 Hz TJ=125°C dI/dt 50 A/µs tr≤100ns Non Repetitive Surge Peak tP=10ms TJ=25°C VDSM/VRSM VDRM/VRRM+100 V Off-State Voltage Peak Gate Current tP=20µs TJ=125°C IGM 4 A Average Gate Power Dissipation TJ=125°C PG(AV) 1 W Operating Junction Temperature TJ -40~+125 °C Storage Junction Temperature TSTG -40~+150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. 2 THERMAL RESISTANCES PARAMETER Junction to Ambient Junction to Case (AC) SYMBOL θJA θJC RATINGS 60 1.2 UNIT °C/W °C/W ELECTRICAL CHARACTERISTICS (TJ =25°C unless otherwise specified.) FOR STANDARD TYPE (4 QUADRANTS) PARAMETER Gate Trigger Current (Note 1) Gate Trigger Voltage Gate Non-Trigger Voltage Holding Current (Note 2) Latching Current Critical Rate of Rise of Off-State Voltage (Note 2) Critical Rate of Rise of Off-State Voltage at Commutation(Note 2) SYMBOL IGT TEST CONDITIONS VD=12V, RL=33Ω I-II-III IV ALL VD=VDRM, RL=3.3kΩ, TJ=125°C ALL VGT VGD IH IT=500mA IL IG=1.2IGT C MIN TYP B UNIT MAX MIN TYP MAX 25 50 mA 50 100 mA 1.3 1.3 V 0.2 I-III-IV II 0.2 V 25 50 mA 40 80 60 120 mA mA dV/dt VD=67%VDRM, Gate Open, TJ=125°C 200 400 V/µs (dV/dt)c (dI/dt)c=7A/ms, TJ= 125°C 5 10 V/µs MIN TYP MAX UNIT 1.55 V 0.85 V 25 mΩ 5 μA 2 mA STATIC CHARACTERISTICS PARAMETER Peak On-State Voltage(Note 2) Threshold Voltage(Note 2) Dynamic Resistance(Note 2) SYMBOL TEST CONDITIONS VTM ITM=22.5A, tp=380μs TJ=25°C VTO TJ=125°C RD TJ=125°C IDRM TJ=25°C Repetitive Peak Off-State Current VDRM=VRRM IRRM TJ=125°C Note: 1. Minimum IGT is guaranteed at 5% of IGT max. 2. For both polarities of MT2 referenced to MT1. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 3 QW-R401-044.b BTB16 Preliminary TRIAC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 QW-R401-044.b