Production specification Transient Voltage Suppressor BZG04--SERIES Features Plastic package has underwriters laboratory flammability classification 94V-0 Optimized for LAN protection applications Low profile package with built-in strain relief for surface mounted applications Glass passivated junction Low incremental surge resistance, excellent clamping capability 300W peak pulse power capability with a 10/1000μs wave form, repetition rate (duty cycle): 0.01% Very fast response time High temperature soldering guaranteed: 250°C/10 seconds at terminals Mechanical Data Case: SMA molded plastic Molding compound, UL flammability classification rating 94V-0 Polarity: Color band denotes cathode end Devices for Bidirectional Applications For bi-directional devices, use suffix C (e.g. BZG04-10C). Electrical characteristics apply in both directions. Maximum Ratings (@TA = 25°C unless otherwise specified) Parameter Symbol Value Units PRSM 300 W Non-repetitive peak reverse power dissipation 10/1000s exponential pulse(see Fig.3); TJ=25℃prior tosurge; see also Fig.1 Typical thermal resistance, junction to ambient RθJA 100(NOTE1) 150(NOTE2) ℃/W Forward voltage @IF=0.5A; seeFig.2 VF 1.2 V Operating junction temperature range RθJL -55---+175 ℃ Operating storage temperature range TJ -55---+175 ℃ NOTES: 1. Device mounted on an Al2O3 printed-circuit board, 0.7mm thick; thickness of Cu-layer ≥35m, see Fig.4. 2.Device mounted on an epoxy-glass printed-circuit board, 1.5mm thick; thickness of Cu-layer ≥40μm SMA001AA Rev.B www.gmicroelec.com Production specification Transient Voltage Suppressor BZG04--SERIES Electrical Characteristics (@TA = 25°C unless otherwise specified) Part number Marking Max. Max. Breakdown Test Clamping Peak Voltage VBR@IT Current Voltage Pulse @IPP Current code Max. Reverse Reverse Leakage Standoff @ Voltage VRWM V IT VC IPP IR VRWM MIN mA V A uA V 50 14.8 20.3 20 8.2 BZG04-8V2 D8V2 9.4 BZG04-9V1 D9V1 10.4 50 15.7 19.1 5.0 9.1 BZG04-10 D10 11.4 50 17.0 17.7 5.0 10 BZG04-11 D11 12.4 50 18.9 15.9 5.0 11 BZG04-12 D12 13.8 50 20.9 14.4 5.0 12 BZG04-13 D13 15.3 25 22.9 13.1 5.0 13 BZG04-15 D15 16.8 25 25.6 11.7 5.0 15 BZG04-16 D16 18.8 25 28.4 10.6 5.0 16 BZG04-18 D18 20.8 25 31.0 9.7 5.0 18 BZG04-20 D20 22.8 25 33.8 8.9 5.0 20 BZG04-22 D22 25.1 25 38.1 7.9 5.0 22 BZG04-24 D24 28 25 42.2 7.1 5.0 24 BZG04-27 D27 31 25 46.2 6.5 5.0 27 BZG04-30 D30 34 10 50.1 6.0 5.0 30 BZG04-33 D33 37 10 54.1 5.5 5.0 33 BZG04-36 D36 40 10 60.7 4.9 5.0 36 BZG04-39 D39 44 10 65.5 4.6 5.0 39 BZG04-43 D43 48 10 70.8 4.2 5.0 43 BZG04-47 D47 52 10 78.6 3.8 5.0 47 BZG04-51 D51 58 10 86.5 3.5 5.0 51 BZG04-56 D56 64 10 94.4 3.2 5.0 56 BZG04-62 D62 70 10 103.5 2.9 5.0 62 BZG04-68 D68 77 10 114 2.6 5.0 68 BZG04-75 D75 85 5.0 126 2.4 5.0 75 BZG04-82 D82 94 5.0 139 2.2 5.0 82 BZG04-91 D91 104 5.0 152 2.0 5.0 91 BZG04-100 D100 114 5.0 167 1.8 5.0 100 BZG04-110 D110 124 5.0 185 1.6 5.0 110 BZG04-120 D120 138 5.0 204 1.5 5.0 120 BZG04-130 D130 153 5.0 224 1.3 5.0 130 BZG04-150 D150 168 5.0 249 1.2 5.0 150 BZG04-160 D160 188 5.0 276 1.1 5.0 160 BZG04-180 D180 208 2.0 305 1.0 5.0 180 BZG04-200 D200 228 2.0 336 0.9 5.0 200 BZG04-220 D220 251 2.0 380 0.8 5.0 220 SMA001AA Rev.B www.gmicroelec.com Production specification Transient Voltage Suppressor BZG04--SERIES Ratings and Characteristic Curves (TA=25°C unless otherwise noted) SMA001AA Rev.B www.gmicroelec.com Production specification Transient Voltage Suppressor BZG04--SERIES Package Outline Dimensions(unit:mm) Mounting Pad Layout(unit:mm) Ordering Information Part No. Package Shipping BZG04-SERIES SMA 5000 /Tape&Reel SMA001AA Rev.B www.gmicroelec.com