ISB01 Series DC-DC Converter 1 Watt xxx Series • Regulated Single & Dual Output • 2:1 Input Range • Compact SMD Package • 1500 VDC Isolation • Operating Temperature -40 °C to +95 °C • Remote On/Off • Tape & Reel Package Available • Optional Water Washable Versions • 3 Year Warranty Dimensions: ISB01: 0.74 x 0.68 x 0.34” (18.9 x 17.2 x 8.7 mm) Models & Ratings Input voltage Output voltage Output current Input current(1,2) No load Full load Maximum Reflected ripple capacitive load(3) current Efficiency Model number(4) 5V 200 mA 256 mA 1680 µF 78% ISB0105S05 12 V 83 mA 252 mA 820 µF 79% ISB0105S12 15 V 67 mA 248 mA 680 µF ±12 V ±42 mA 255 mA ±15 V ±33 mA 5V 200 mA 12 V 83 mA 15 V 67 mA ±12 V 4.5-9V 40 mA 80 mA 81% ISB0105S15 ±470 µF 79% ISB0105D12 248 mA ±330 µF 80% ISB0105D15 105 mA 1680 µF 79% ISB0112S05 105 mA 820 µF 79% ISB0112S12 102 mA 680 µF ±42 mA 104 mA ±15 V ±33 mA 5V 200 mA 12 V 83 mA 15 V 67 mA ±12 V 9-18V 82% ISB0112S15 ±470 µF 81% ISB0112D12 103 mA ±330 µF 80% ISB0112D15 53 mA 1680 µF 79% ISB0124S05 51 mA 820 µF 82% ISB0124S12 51 mA 680 µF ±42 mA 51 mA ±15 V ±33 mA 5V 200 mA 12 V 83 mA 15 V 67 mA ±12 V ±15 V 18-36V 36-75V 20 mA 10 mA 40mA 82% ISB0124S15 ±470 µF 82% ISB0124D12 50 mA ±330 µF 82% ISB0124D15 26 mA 1680 µF 79% ISB0148S05 26 mA 820 µF 80% ISB0148S12 26 mA 680 µF ±42 mA 26 mA ±33 mA 25 mA 7 mA 30mA 20mA 80% ISB0148S15 ±470 µF 81% ISB0148D12 ±330 µF 81% ISB0148D15 Notes 1. Input currents measured at nominal input voltage. 2. Input current is typically 2.5 mA at nominal input voltage when output is remotely turned off. 3. Maximum capacitive load is per output. 4. For optional water washable version, add suffix ‘-P’ e.g. ISB0112S12-P. Mechanical Details 0.74 (18.9) 0.60 (15.24) 0.5 (12.7) 0.1 (2.54) 9 14 8 Top View 1 2 6 0.04 (1.0) 1 7 0.54 (13.7) 0.68 (17.2) 0.33 (8.45) 0.01 (0.25) S 0.04 (1.1) 0.6 (15.0) www.xppower.com Seating Plane 0.73 (18.6) 0.54 (13.7) 0.64 (16.15) 0~ 4 0.1 (1.8) 0.15 S 0.10 (2.54) 0.06 (1.6) 0.10 (2.45) ISB01 Series DC-DC Converter Input Characteristic Minimum Typical 4.5 Input Voltage Range Input Filter Maximum Units 9 9.0 18 18.0 36 36.0 75 VDC 12 V nominal 24 V nominal 48 V nominal Internal Capacitor Input Surge 15 5 V nominal 25 12 V nominal 50 VDC for 1 s 24 V models 48 V models 100 Remote On/Off Notes & Conditions 5 V nominal ON: Logic high (2.5 - 5.5 V) or open circuit OFF: Logic low (<0.8 V) or short pin 1 to pin 2 Output Maximum Units Notes & Conditions 30 VDC See Models and Ratings table Initial Set Accuracy ±1.0 % Output Voltage Balance ±1.0 % For dual output with balanced laods A No minimum load required Characteristic Minimum Output Voltage Typical 5 Minimum Load Line Regulation ±0.2 % Load Regulation ±1.0 % Cross Regulation ±5.0 % 5 % deviation 75 mV pk-pk Transient Response 3 Ripple & Noise On dual output models when one load is varied between 25% and 100% and other is fixed at 100% Short Circuit Protection Recovery within 1% in less than 250 µs for a 25% load change. 20 MHz bandwidth. Measured using 0.47 µF ceramic capacitor. Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ ˚C Maximum Units General Characteristic Minimum Efficiency Isolation: Input to Output Isolation Resistance Typical 80 pF kHz At 500 VDC 50 5.8 W/in3 220 Power Density Mean Time Between Failure Weight See Models and Ratings table 60 s/1 s 109 Switching Frequency Notes & Conditions VDC 1500/1800 Isolation Capacitance Moisture Sensitivity Level % Ω 2.8 MHrs 0.01 (4.5) lb (g) Level 2 At 1 V, 100 kHz MIL-HDBK-217F, +25 °C GB IPC/JEDEC J-STD-020D.1 Environmental Characteristic Maximum Units Notes & Conditions Operating Temperature Minimum -40 Typical +95 °C See Derating Curve. Storage Temperature -55 +125 °C Case Temperature +95 °C Humidity 95 %RH Cooling Case Flammability Non-condensing Natural convection UL 94V-0 Rated Non conductive black plastic Lead-Free Reflow Solder Process IPC/JEDEC J-STD-020D.1 www.xppower.com 2 ISB01 Series DC-DC Converter Safety Approvals Safety Agency Safety Standard Notes & Conditions CB IEC60950-1 ITE UL UL/cUL60950-1 ITE EMC: Emissions Phenomenon Standard Test Level Conducted EN55022 Class A Notes & Conditions Mechanical Details Connecting Pin Pattern 0.74 (18.9) 0.5 (12.7) 0.1 (1.8) 9 14 8 Top View 1 6 2 0.60 (15.24) 0.1 (2.54) 0.54 (13.7) 0.68 (17.2) 7 0.73 (18.6) 0.54 (13.7) 0.64 (16.15) 0.04 (1.0) 0.06 (1.6) 0.10 (2.54) 0.33 (8.45) 0.04 (1.1) 0.01 (0.25) 0.6 (15.0) Seating Plane 0~ 4 S 0.15 S 0.10 (2.45) Pin Connections Pin 1 2 6 7 8 9 14 Single -Vin Remote On/Off No Connection No Connection +Vout -Vout +Vin Dual -Vin Remote On/Off Common -Vout +Vout Common +Vin Application Notes Derating Curve Output Power (%) 100 0 -40 75 95 Ambient Temperature (°C) Notes 1. All dimensions are in inches (mm) 2. Weight: 0.01 lbs (4.5 g) approx. 3 3. Tolerance: X.XX±0.01 (X.X±0.25) X.XXX±0.005 (X.XX±0.13) 4. Pin Tolerance: ±0.002 (±0.05) www.xppower.com 22 Dec 15