SPECIFICATION Supplier : Samsung electro-mechanics Samsung P/N : CL21B224KBFNNNG Product : Multi-layer Ceramic Capacitor Description : CAP, 220㎋, 50V, ±10%, X7R, 0805 A. Samsung Part Number ① Series ② Size CL 21 B 224 K B F N N N G ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ Samsung Multi-layer Ceramic Capacitor 0805 (inch code) ③ Dielectric X7R ④ Capacitance 220 ㎋ ±10 % ⑤ Capacitance L: 2.0 ± 0.1 tolerance 50 V ⑥ Rated Voltage ⑦ Thickness 1.25 ± 0.1 mm mm 1.25 ± 0.1 W: ⑧ Inner electrode Ni Termination Cu Plating Sn 100% mm (Pb Free) ⑨ Product Normal ⑩ Special Reserved for future use ⑪ Packaging Embossed Type, 7"reel(3,000ea) B. Samsung Reliability Test and Judgement condition Performance 1.0±0.2Vrms More than 500Mohm㎌ Rated Voltage 60~120 sec. Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Visual inspection 250% of the rated voltage Voltage mechanical breakdown Temperature X7R Characteristics Adhesive Strength (From -55℃ to 125℃, Capacitance change should be within ±15%) No peeling shall be occur on the 500gF, for 10±1 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan δ (DF) Insulation Within specified tolerance Test condition 1㎑±10% Capacitance 0.025 max. Resistance within ±12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 245±5℃, 3±0.3sec. (preheating : 80~120℃ for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan δ, IR : initial spec. within ±7.5% Solder pot : 270±5℃, 10±1sec. Performance Vibration Test Capacitance change : within ±5% Tan δ, IR : initial spec. Moisture Capacitance change : Resistance Tan δ : 0.05 max IR Amplitude : 1.5mm From 10㎐ to 55㎐ (return : 1min.) 2hours 3 direction (x, y, z) within ±12.5% With rated voltage 40±2℃, 90~95%RH, 500+12/-0 hours : More than 25㏁·㎌ High Temperature Capacitance change : Resistance Tan δ : 0.05 max IR Test condition within ±12.5% With 200% of the rated voltage Max. operating temperature : More than 50㏁·㎌ 1000+48/-0 hours Temperature Capacitance change : Cycling Tan δ, IR : initial spec. within ±7.5% 1 cycle condition Min. operating temperature 25℃ → 25℃ → Max. operating temperature → 5 cycles test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5℃, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.