3.3V, HCMOS, SMD Oscillator RoHS Compliant / Pb Free Model: F4100 SERIES Page 1 of 2 Rev. 1/16/2014 http://www.foxonline.com/need_a_sample.htm • PART NUMBER SELECTION Part Number 116-Frequency-xxxxx 117-Frequency-xxxxx 124-Frequency-xxxxx 125-Frequency-xxxxx 126-Frequency-xxxxx 127-Frequency-xxxxx 128-Frequency-xxxxx Model Frequency Number Stability1 F4100 ±100PPM F4100R ±100PPM F4105 ±50PPM F4105R ±50PPM F4106 ±25PPM F4106R ±25PPM* F4108 ±20PPM* Operating Temperature (ºC) -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 -40 ~ +85 -10 ~ +70 Frequency Range (MHz) 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 170.000 0.012 ~ 165.000 0.012 ~ 156.520 0.012 ~ 162.000 XpressO® Equivalent FXO-HC73 Why XpressO? Lower Cost, Faster Delivery, Low Jitter! • ELECTRICAL CHARACTERISTICS MAX (unless otherwise noted) PARAMETERS Frequency Range (Fo) Storage Temperature Range (Tstg) Supply Voltage (Vdd) Input Current (Idd) 0.012 ~ 0.040 MHz 0.040+ ~ 1.500 MHz 1.500+ ~ 32.000 MHz 32.000+ ~ 50.000 MHz 50.000+ ~ 67.000 MHz 67.000+ ~ 170.000 MHz Output Symmetry (50% Vdd) 0.012 ~ 50.000 MHz 50.000+ ~ 170.000 MHz Rise Time (10% ~ 90% Vdd) (Tr) 0.012 ~ 80.000 MHz 80.000+ ~ 125.000 MHz 125.000+ ~ 170.000 MHz Fall Time (90% ~ 10% Vdd) (Tf) 0.012 ~ 80.000 MHz 80.000+ ~ 125.000 MHz 125.000+ ~ 170.000 MHz Output Voltage (Vol) (Voh) Output Current (Iol) (Ioh) Output Load (HCMOS) Standby Current Start-up Time (Ts) 0.012 ~ 32.000 MHz 32.000+ ~ 170.000 MHz Output Disable Time 2 Output Enable Time 2 0.012 ~ 32.000 MHz 32.000+ ~ 170.000 MHz Jitter (FO ≥ 100MHz) 12kHz ~ 20MHz RMS Period Cycle-to-Cycle 0.012 ~ 170.000 MHz -55ºC ~ +125ºC 3.3V ± 10% 3mA 6mA 15mA 20mA 25mA 40mA Top View #4 6nS 4nS 3nS 6nS 4nS 3nS 10% Vdd 90% Vdd Min 2mA Min -2mA Min 15pF 10µA 5mS 10mS 150nS 5mS 10mS 0.3pS Typ. 2.5pS Typ. 20pS Typ. Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. *Excludes Shock/Vibration 2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to minimize power supply line noise. Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary. All specifications subject to change without notice. 5570 Enterprise Parkway Fort Myers, Florida 33905 An Integrated Device Technology, Inc. company #3 5.2 Max #2 #1 Dot denotes pin 1 1.5 Max 1.4±0.2 45% ~ 55% 40% ~ 60% 1 Fox Electronics 7.5 Max Bottom View #1 #2 #4 #3 2.6±0.2 5.08±0.1 Recommended Solder Pad Layout 1.8±0.1 2.0±0.1 4.2±0.1 5.08±0.1 Pin Connections #1 E/D #3 output #2 GnD #4 VDD All dimensions are in millimeters • Enable / Disable Function 2 INH (Pin 1) OUTPUT (Pin 3) OPEN 2 ACTIVE '1' Level Vih ≥ 70% Vdd ACTIVE '0' Level Vil ≤ 30% Vdd High Z USA +1.239.693.0099 FOXonline.com FAX +1.239.693.1554 3.3V, HCMOS, SMD Oscillator Model: F4100 SERIES Page 2 of 2 RoHS Compliant / Pb Free • TAPE SPECIFICATIONS (millimeters) MODEL F4100 Series • REEL SPECIFICATIONS (millimeters) B C D E F STD Reel QTY MODEL A F4100 Series 2,000 ∅1.5 4.0 8.0 7.5 16.0 2.15 Fox Electronics 5570 Enterprise Parkway Rev. 1/16/2014 http://www.foxonline.com/need_a_sample.htm Fort Myers, Florida 33905 An Integrated Device Technology, Inc. company G H I J K L M 2.0 ∅13 ∅21 ∅80 ∅255 17.5 2.0 USA +1.239.693.0099 FOXonline.com FAX +1.239.693.1554