10/100Base-TX Interface Module with Enhanced Common Mode Attenuation ELECTRONICS INC. EPF8010GH • Robust construction to meet IR/VP soldering process • Complies with or exceeds IEEE 802.3, 10/100Base-TX Standards • Guaranteed to operate with 8 mA DC Bias at 70°C Electrical Parameters @ 25° C Insertion Loss (dB Max.) OCL (@ 70°C) Return Loss (dB Min.) Common Mode Rejection (dB Min.) 100 KHz, 0.1 Vrms 8 mA DC Bias 1-80 MHz 80-100 MHz 100-150 MHz 1-30 MHz 30-60 MHz 60-100 MHz 1-30 MHz 30-100 MHz 100-500 MHz Cable Side Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv Xmit/Rcv 350 µH -1/-1 -2/-2 -3.5/-3 -18/-18 -12/-12 -10/-10 -40/-40 -35/-30 -10/-10 • Crosstalk (dB Min.) 5-10 MHz 10-100 MHz -35 -35 Impedance : 100 Ω • Rise Time : 3.0 nS Max. • Isolation : 1500 Vrms • Schematic Transmit Channel Receive Channel RD+ 9 RD- 10 16 RX+ TD- 1 15 RX TD+ 2 8 TX- 7 TX+ 1CT:1CT CT 11 1CT:1CT 14 CT CT 3 6 CT Package .980 (24.89) Pin 1 I.D. .092 (2.34) .100 (2.54) .140 (3.56) PCA EPF8010GH Date Code .390 (9.91) .560 (14.22) .700 (17.78) .247 Max. (6.27) Pad Layout .030 (.762) .010/.015 (.254/.381) .008/.013 (.203/.330) 0°-8° .035 (.889) .017/.022 (.432/.559) .500 (12.70) .100 (2.54) Unless Otherwise Specified Dimensions are in Inches /mm ± .010 /.25 PCA ELECTRONICS, INC. 16799 SCHOENBORN ST. NORTH HILLS, CA 91343 Product performance is limited to specified parameters. Data is subject to change without prior notice. CSF8010GH Rev. 2 5/8/03 TEL: (818) 892-0761 FAX: (818) 894-5791 http://www.pca.com