SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE MISCELLANEOUS HARDWARE & ACCESSORIES SWITCH HARDWARE....................................... D2 - D4 PUSHBUTTON AND TOGGLE CAPS............... D5 - D6 SECURITY GUARDS......................................... D7 - D9 SEALING BOOTS.............................................. D10 - D14 VL SERIES LED INDICATORS.......................... D15 - D16 D APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] D1 MISCELLANEOUS HARDWARE HEX NUT A112 Nickel plated brass 1/4-40 HEX NUT Brass 1/4-40 Nickel plated U76 Matte black U94 8.00 (.314) 9.00 (.354) HEX NUT Brass Chrome plated U1916 2.00 (.078) 2.00 (.086) 6.00 DIA x 0.75 SI (.236 DIA x 0.75SI) 6.35 DIA-40UNS (1/4-40UNS) HEX NUT U842 10mm (.393") Nickel plated brass D 12.00 (.472) HEX NUT A465 Nickel plated brass 15/32-32 HEX NUT Brass 15/32-32 Nickel plated U162 Matte black U41 Chrome plated U92 14.00 (.551) 2.30 (.090) 10.00 DIA x 0.75 SI (.393 DIA X 0.75 SI) 6.00 DIA x 0.75 SI (.236 DIA x 0.75SI) 2.30 (.090) PAL NUT U42 12mm (.472") Zinc plated steel 12.00DIA X 0.75SI (.472DIA X 0.75SI) 12.00DIA X 0.75SI (.472DIA X 0.75SI) HEX NUT 10-621 16mm (.629") Nickel plated brass 19.00 (.748) 12.00DIA X 0.75SI (.472DIA X 0.75SI) 14.00 (.551) 11.90 DIA-32UNS (15/32-32UNS) HEX CAP NUT Brass 12mm (.472") Chrome plated U35 HEX NUT Brass 12mm (.472") Nickel plated U166 Matte black U183 Chrome plated U212 3.00 (.118) 2.30 (.09) HEX NUT U1950-5 19mm (.748") Nickel plated brass 22.00 (.866) 3.00 (.118) 1.20-45 (.047-45 ) 16.00 (.629) 3.50 (.137) 16.00 (.629) 2.20 (.086) 16.00 DIAx1.00 SI (.629 DIAx1.00 IS) HEX NUT 10-855-5 19mm (.748") Nickel plated brass 22.00 (.866) 4.00 (.157) HEX NUT U1951-5 22mm (.866") Nickel plated brass 25.00 (.984) 3.00 (.118) HEX NUT 10-856-5 22mm (.866") Nickel plated brass 25.00 (.984) 1.30-45 (.051-45 ) 19.00 DIAx1.00 SI (.748 DIAx1.00 IS) PANEL DRESS NUT A168P1 Blind thread, Nickel plated brass 1/4-40 D2 19.00 DIAx1.00 SI (.748 DIAx1.00 IS) 4.00 (.157) HEX NUT U2059-5 24mm (.944") Nickel plated brass 27.00 (1.062) 1.30-45 (.051-45 ) 22.00 DIAx1.00 SI (.866 DIAx1.00 IS) PANEL DRESS NUT A168P2 Thru thread, Nickel plated brass 1/4-40 22.00 DIAx1.00 SI (.866 DIAx1.00 IS) PANEL DRESS NUT A274 Nickel plated brass 1/4-40 4.00 (.157) 1.30-45 (.051-45 ) 24.00 DIAx1.00 SI (.944 DIAx1.00 IS) PANEL DRESS NUT A540 Nickel plated brass 15/32-32 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 12.00 (.472) 1.60 (.062) HEX NUT Brass Nickel plated U208 Matte black U726 MISCELLANEOUS HARDWARE (CONT'D.) 2.54 (.100) 8.00 DIA (.314 DIA) 2.20 (.086) 9.00 DIA (.354 DIA) 2.60 (.102) 4.80 DIA (.188 DIA) 12.00 DIA (.472 DIA) 9.00 DIA (.354 DIA) 2.70 (.106) 2.70 (.106) KNURLED CAP NUT Brass Chrome plated U232 12.00 DIA (.472 DIA) 6.00 DIA x 0.75 SI (.236 DIA x 0.75SI) KNURLED NUT U2311 10mm (.393") Chrome plated brass 2.20 (.086) 14.00 DIA (.551 DIA) 6.35 DIA-40UNS (1/4-40UNS) KNURLED CAP NUT Brass Chrome pl. U461 Matte black U502 2.60 (.102) 6.35 DIA-40UNS (1/4-40UNS) 6.00 DIA x 0.75 SI (.236 DIA x 0.75SI) KNURLED CAP NUT Brass 1/4-40 Chrome pl. U268 Matte black U725 6.35 DIA-40UNS (1/4-40UNS) 14.00 DIA (.551 DIA) 10.00 DIA x 0.75 SI (.393 DIA X 0.75 SI) 6.00 DIA x 0.75 SI (.236 DIA x 0.75SI) KNURLED CAP NUT U2220 10mm (.393") Chrome plated brass KNURLED NUT Brass 15/32-32 Nickel plated U53 Matte black U1634 16.00 DIA (.629 DIA) 4.00 (.157) 6.60 DIA (.259 DIA) 9.00 DIA (.354 DIA) 2.20 (.086) 9.00 DIA (.354 DIA) 6.35 DIA-40UNS (1/4-40UNS) KNURLED CAP NUT Brass 1/4-40 Chrome plated U216 Matte black U218 KNURLED NUT U826 Nickel plated brass 5.20 DIA (.204 DIA) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 6.35 DIA-40UNS (1/4-40UNS) KNURLED NUT Brass 1/4-40 Nickel plated U229 Matte black U230 2.00 (.078) 5.20 DIA (.204 DIA) 7.70 DIA (.303 DIA) KNURLED NUT U501 1/4-40 Chrome plated brass 4.80 DIA (.188 DIA) KNURLED NUT U369 1/4-40 Nickel plated brass 5.20 DIA (.204 DIA) DECORATIVE NUT A447 Thru thread, chromium plated brass 1/4-40 2.50 (.098) 10.00 DIA x 0.75 SI (.393 DIA X 0.75 SI) 11.90 DIA-32UNS (15/32-32UNS) 16.00 DIA (.629 DIA) 16.00 DIA (.629 DIA) PANEL DRESS NUT Brass 12mm (.472") Nickel plated U411, Matte black U413, Chrome plated U412 16.00 DIA (.63 DIA) 11.90 DIA-32UNS (15/32-32UNS) 11.90 DIA-32UNS (15/32-32UNS) INSULATED PANEL DRESS NUT 12mm (.472") ABS or polyamide with glass fiber. blue U521, black U522, green U523, gray U524, yellow U525, red U526, white U527/1, orange U529 2.50 (.098) KNURLED NUT 10-960-5 16mm (.629") Nickel plated brass 18.50 DIA (.728 DIA) 16.00 DIA (.629 DIA) 4.00 (.157) KNURLED NUT U1977-5 19mm (.748") Nickel plated brass 22.00 DIA (.866 DIA) 4.50 (.177) 4.00 (.157) 17.00 DIA (.669 DIA) 4.00 (.157) 16.00 DIAx1.00 SI (.629 DIAx1.00 IS) 1.20 - 45 (.047 - 45 ) 3.00 (.118) 16.00 DIA (.629 DIA) 3.00 (.118) 10.3 (.405) KNURLED CAP NUT Brass 12mm (.472") Chrome plated U118 Matte black U130 KNURLED CAP NUT Brass 12mm (.472") Chrome plated U117 Matte black U129 4.00 (.157) 8.20 DIA (.322 DIA) 8.70 DIA (.342 DIA) 4.00 (.157) KNURLED CAP NUT U124 15/32-32 Chrome plated brass 8.5 (.334) KNURLED CAP NUT U123 15/32-32 Chrome plated brass 19.00 DIAx1.00 SI (.748 DIAx1.00 IS) 1.30-45 (.051-45 ) APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] D3 D MISCELLANEOUS HARDWARE (CONT'D.) LOCKWASHER 1/4 Stainless steel U215 0.40 (.015) LOCKWASHER U14 .122 I.D. 9.50 DIA (.374 DIA) LOCKWASHER U843 10mm (.393") Stainless steel LOCKWASHER A115 Nickel plated steel 1/4 0.50 (.019) 14.40 DIA (.566 DIA) 0.80 (.031) 3.10 DIA (.122 DIA) 6.50 DIA (.255 DIA) 1.40 (.055) 0.40 (.015) 10.30 DIA (.405 DIA) LOCKWASHER U13 15/32 Zinc plated LOCKWASHER A466 Nickel plated steel 15/32 17.00 DIA (.669 DIA) LOCKING RING 1/4 Nickel plated U78 Matte black U93 9.60 DIA (.377 DIA) 0.50 (.019) 2.00 (.078) 5.20 (.204) D ANTI-ROTATE RING A107 Nickel plated brass 1/4 1.40 (.055) 12.10 DIA (.476 DIA) LOCKING RING Brass Nickel plated U198 Matte black U728 6.50 DIA (.255 DIA) ANTI-ROTATE RING (LARGE) A158 Nickel plated brass 1/4 LOCKING RING U844 10mm (.393") Nickel plated 14.00 DIA (.551 DIA) 11.80 DIA (.464 DIA) 0.80 (.031) ANTI-ROTATE RING A482 Nickel plated brass 15/32 2.50 (.098) 0.80 (.031) 1.10 (.043) 10.20 DIA (.401 DIA) LOCKING RING 12mm (.472") Nickel plated U121 Matte black U12 SEALING WASHER U60 15/32 12.00 DIA (.472 DIA) 2.80 (.110) 0.80 (.031) 17.00 DIA (.669 DIA) 11.10 (.437) 15.00 DIA (.590 DIA) 10.60 DIA (.417 DIA) 11.80 DIA (.464 DIA) 9.60 (.377) 11.20 (.440) 2.30 (.090) 12.20 DIA (.48 DIA) SWITCH PLATE ON-OFF U19 .480 I.D. 0.50 (.019) 6.35 (.25) 21.00 DIA (.826 DIA) 18.00 DIA (.708 DIA) 6.00 DIA (.236 DIA) ON 28.00 (1.102) I 28.00 (1.102) 12.20 DIA (.48 DIA) 18.00 DIA (.708 DIA) CONNECTING SCREW U03 4.50 (.177) SWITCH PLATE I-O U1050 .480 I.D. 0.80 (.031) GROUND CONNECTOR 12mm (.472") Nickel plated U187 0.50 (.019) 12.20 DIA (.480 DIA) 2.30 (.090) 6.40 DIA (.251 DIA) SEALING WASHER Nylon 12mm (.472") U21 18.20 DIA (.716 DIA) 5.80 (.228) 18.20 DIA (.716 DIA) SEALING WASHER U360 1/4-40 For keyway bushing 1.00 (.039) 6.10 DIA (.240 DIA) 5.65 (.222) 9.40 (.370) 5.50 (.216) 6.20 (.244) 2.00 (.078) 12.20 DIA (.48 DIA) OFF 3.00 DIAx0.5 (.118 DIAx0.5) 12.20 DIA (.48 DIA) D4 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 5.80 DIA (.228 DIA) Note: additional caps are shown in some switch sections. MISCELLANEOUS PUSHBUTTON ACCESSORIES & CAPS SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PANEL DRESS NUTS & CAPS FOR PUSHBUTTON SWITCHES ASSEMBLY NUMBER A1354P1 A1354P2 A1354P3 A1355P1 FITS SWITCH MODEL 810/820 401/402 PB 810/820 OPTION(S) REQUIRED KM S PY KM INCLUDES DRESS NUT A495P1 A495P1 A495P1 A495P2 CAP B494P1 B494P2 B494P3 B494P1 A1355P2 A1355P2 A1355P3 302 401/402 PB NONE NONE PY or P2Y1 A495P2 A495P2 A495P2 B494P2 B494P2 B494P3 (P.T.) PART NO. A495P1 A495P2 A DIA. .385 .413 'A' dimension is determined by panel thickness indicated in table and allows for (1) back-up Nut A112 and (1) Lockwasher A115. Order these separately to provide for secure, vibration resistant mounting. B DIA. .323 .245 COLOR CAP Vinyl plastisol Order Assembly Number from chart to left. Add cap color no. from color code chart below. Example: A1354P36 indicates assembly to fit a PB switch and is supplied with a red cap. SWITCH MODEL 810/820 PB PB 302 401/402 401/402 OPTION (IF REQ'D) KM PY P2Y1 S A1354 A P.T. .040 .062 .100 .125 .130 .062 A1355 A P.T. .090 .093 .135 .171 .120 .093 .070 .078 .130 .078 - PUSHBUTTON CAP A212 PUSHBUTTON CAPS (ALL) Material - Nylon PART NO. DIM. A A118 5/16 FITS ACTUATOR K A391 3/16 L2 A392 3/4 L Caps press fit adequately, however they may be pulled off. If permanent retention is required, cement with Loctite 405 or equivalent, insuring no cement enters switch. FITS PB SERIES COLOR CAPS B366 & B497 PUSHBUTTON CAPS A180 & A496 B366 fits 300 & 400 Series with S option only, and all PB Series. A180 fits all PB Series. A496 fits 800 Series with options KM, KS, KM1, K1M1, K2M, K2S &K2M1. B497 fits 800 Series with options KM, KS, KM1, K1M1 & K2M1. PUSHBUTTON CAP A420 PUSHBUTTON CAP A235 * - Fits all 300 Series except 301 & 305. Fits 301 & 305 with S option. Fits all 400 & PB Series. * - fits all PB, 300 & 400 Series. ** - fits 800 Series with options KM, KS, KM1 & K2M1. ** - Fits 800 Series withoptions KM, KS, KM1 & K2M1. STANDARD COLOR CODE For nylon caps, actuators, bezels & bezel inserts. To specify, add selected color code to part number. Example: A2122 is a black A212 Cap.To specify for actuators, bezels and bezel inserts, see 'Order Format' section following specific series information in this catalog. Code 1 3 5 7 9 Color blue green yellow ivory orange Code 2 4 6 8 Color black gray red white APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] D5 D MISCELLANEOUS PUSHBUTTON ACCESSORIES & CAPS (CONT'D.) COLOR CAP B494 PUSHBUTTON CAP A631 ** - P1 fits all 800 Series except K1M & K1S. * - Fits all 300 Series except 301 & 305. Fits 301 & 305 with S option. Fits all 400 & PB Series. * - P2 fits all 300 & 400 Series. SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ** - Fits 800 Series with options KM, KS, KM1 & K2M1. * - P3 fits all PB Series. CUSTOM MARKING PUSHBUTTON CAP A632 Permanent ink marking is available for switch caps, bezels and rocker actuators. Consult factory with your special requirement. Representative samples available. Fits all PB Series. D SWITCH GUARDS Materials: 5056-H18 aluminum with clear or black anodize, or free machining brass withbright chrome plate. Dimensions in inches and (millimeters). Tolerances: A & D, ±.015" B & C, ±.005" MODEL MG11A MG11B TH'D. 10-48 10-48 COLOR NATURAL AL BLACK AL. FINISH PLAIN PLAIN MG12A MG12B MG12C MG12KA MG12KB MG12KC MG13A 1/4-40 1/4-40 1/4-40 1/4-40 1/4-40 1/4-40 1/4-40 NATURAL AL. BLACK AL. CHROMED BR. NATURAL AL. BLACK AL. CHROMED BR. NATURAL AL. PLAIN PLAIN PLAIN KNURLED KNURLED KNURLED PLAIN MG13B MG13C 1/4-40 1/4-40 BLACK AL. PLAIN CHROMED BR. PLAIN A B C D .530 (13.5) .413 (10.5) .315 (8.0) .236 (6.0) .730 (18.5) .610 (15.5) .315 (8.0) .236 (6.0) STANDARD COLOR CODE For nylon caps, actuators, bezels & bezel inserts. To specify, add selected color code to part number. Example: A2122 is a black A212 Cap.To specify for actuators, bezels and bezel inserts, see 'Order Format' section following specific series information in this catalog. CAPS FOR PRINTED CIRCUIT BOARD PROCESSING Outline Code 1 3 5 7 9 Color blue green yellow ivory orange Code 2 4 6 8 Material Part No. S Vinyl U3012 TP Vinyl U3502 Series Color black gray red white 16.00 (.629) Available on models with plain bushing. Supplied mounted on switches or separately. Provides additional protection during pcb processing. 17.45 (.687) 4.76 DIA (.187 DIA) 3.96 DIA (.155 DIA) D6 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] SECURITY GUARDS for switch series 12000, 3500, 600H and 6000 FEATURES ● ● SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ● ● ● Security guards prevent inadvertent switch operation. When guard cap is raised, switch actuator operates freely. When guard cap is depressed, switch actuator is locked in set position. Designed for use on switches with 11.9mm (.468") or 12mm (.472") dia. threaded bushings and actuator length 17.5mm (.688") outside bushing . Adjust guard for correct switch operation with 2 nuts. MATERIALS Support plate: Cap: Matte black steel Thermoset plastic D Series 20 - for 2 position switches Actuator returned then locked in down position (OFF) MODEL NO. 22 23 24 25 26 27 28 25/28 COLOR Gray White Orange Black Red Green Yellow Black/yellow striped Series 30 - for 3 position switches Actuator returned then locked in upper position MODEL NO. 32 33 34 35 36 37 38 39 35/38 COLOR Gray White Orange Black Red Green Yellow Yellow Black/yellow striped Series 40 - for 2 position switches Actuator returned then locked in upper position MODEL NO. 42 43 44 45 46 47 48 49 45/48 COLOR Gray White Orange Black Red Green Yellow Blue Black/yellow striped APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] D7 SECURITY GUARDS for switch series 12000, 3500, 600H and 6000 MODEL NO. 52 53 54 55 56 57 58 59 55/58 COLOR Gray White Orange Black Red Green Yellow Blue Black/yellow striped D Series 60 - for 3 position switches Actuator returned then locked in upper position MODEL NO. 62 63 64 65 66 67 68 69 65/68 COLOR Gray White Orange Black Red Green Yellow Blue Black/yellow striped Series 70 - for 2 position switches Actuator returned then locked in upper position MODEL NO. 72 73 74 75 76 77 78 79 75/78 COLOR Gray White Orange Black Red Green Yellow Yellow Black/yellow striped Series 20PN - for 2 position switches Actuator returned then locked in down position (OFF) Option P - holes for wiring seal standard on this model MODEL NO. 22PN 23PN 24PN 25PN 26PN 27PN 28PN 29PN D8 COLOR Gray White Orange Black Red Green Yellow Blue APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE Series 50 - for 2 position switches Actuator returned then locked in down position (OFF) SECURITY GUARDS for switch series 12000, 3500, 600H and 6000 SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE PANEL CUT-OUTS & OPTIONS With keying Series 20 - 30 - 40 With locking ring With 'D' flat Series 50 - 60 - 70 P Holes for wiring seal Cap engraving available - consult factory. Other locking configurations such as locked center position available - consult factory. D SECURITY GUARDS for switch series 3500, 600H and 6000 Series 90 Actuator locked in center position Bushing shapes - for standard products B A D C - for other products F E H G Security guard cap shape 1 Locks in center position Prevents down position Security guard cap colors OPTION 1 2 3 4 5 6 7/1 9 0 4 3 2 COLOR Blue Black Green Gray Yellow Red White Orange Striped (see color of stripes) Prevents up position Locks in down position Color of stripes OPTION A B C D STRIPE 1 Red Yellow Red White STRIPE 2 Black Black White Black 5 Locks in up position How to order Series 9 Bushing shape Cap shape Cap color Color of stripes 0 Fill in boxes by making selections from each category indicated. Example of completely specified model number: 90A10B APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] D9 SEALING BOOTS FOR SWITCHES ● ● ● ● ● Prevents dust, sand and water from entering switches. Prevents ice from blocking actuator movement on toggle switches. Compatible with internally sealed toggle and pushbutton actuators. Available in a wide range of colors . Each boot is supplied with a sealing ring or washer. MATERIALS AND SPECIFICATIONS D Boot material: Nut material: Operating temperature: Neoprene or silicone (see comparative advantages below) Nickel plated or matte black finished brass Neoprene; -20°C to 50°C -40°C to 85°C Comparative Advantages Temperature Range Low High Elasticity Mechanical Resistance Silicone Neoprene Excellent Poor Excellent Poor Poor Excellent Excellent Good TYPES OF BOOTS - CROSS SECTIONS Full toggle* (standard) Half toggle* * Color options available Two part* (no metal parts accessible) For double sealing EXAMPLES OF MOUNTING For toggle bushing 6 x 0.75 (.236 x 0.75) - 5500 series NUT Knurled Nickel plated Knurled Matte black Hex Nickel plated Hex Matte black D10 FULL TOGGLE SILICONE BOOTS Black Red Green White U1341 U1341-6 U1341-3 U1341-7 U1343 U1343-6 U1343-3 U1343-7 U1302 U1302-6 U1302-3 U1302-7 U1304 U1304-6 U1304-3 U1304-7 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE FEATURES SEALING BOOTS FOR SWITCHES For toggle bushing 6,35-40NS (1/4-40NS) - 5000 and 11000 series SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE NUT Knurled Nickel plated Knurled Matte black Hex Nickel plated Hex Matte black FULL TOGGLE SILICONE BOOTS Black Red Green White U1331 U1331-6 U1331-3 U1331-7 U1333 U1333-6 U1333-3 U1333-7 U1229 U1229-6 U1229-3 U1229-7 U1231 U1231-6 U1231-3 U1231-7 D For toggle bushing 6,35-40NS (1/4-40NS) - 5000 and 11000 series NUT SILICONE BOOTS (supplied as 2 separate parts) Black Red Green White U5149 U5149-6 U5149-3 U5149-7 When boot is mounted onto panel, metal parts of switch are completely covered by insulation. For toggle bushing 10 x 0.75 (.393 x 0.75) - 10600 series KNURLED NUT Nickel plated FULL TOGGLE SILICONE BOOTS Black Red Green White U1612 U1612-6 U1612-3 U1612-7 Matte black U1614 U1614-6 U1614-3 U1614-7 For toggle bushing 11,9-32 (15/32-32NS) - 12000, 3500 and 6000 series HEX NUT Nickel plated FULL TOGGLE SILICONE BOOTS Black Red Green White U1031 U1031-6 U1031-3 U1031-7 Matte black U1024 U1024-6 U1024-3 U1024-7 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] D11 SEALING BOOTS FOR SWITCHES HEX NUT Nickel plated HALF TOGGLE SILICONE BOOTS Black Red Green White U1600 U1600-6 U1600-3 U1600-7 Matte black U1602 U1602-6 U1602-3 U1602-7 D For toggle bushing 12 X 0.75 SI (.472 X 0.75 IS) - 4450, 4650 and 1600 series HEX NUT FULL TOGGLE BLACK NEOPRENE BOOTS U09 Nickel plated Matte black U223 For toggle bushing 12 x 0.75 SI (.472 x 0.75 IS) - 400, 500, 600H, 6-600H, 600SH, 660, 1000, 1500 and 3600 series HEX NUT Nickel plated FULL TOGGLE SILICONE BOOTS Black Red Green White U1565 U1565-6 U1565-3 U1565-7 Matte black U1567 U1567-6 U1567-3 U1567-7 FULL TOGGLE BLACK NEOPRENE BOOTS Nickel plated U851 Matte black U853 For toggle bushing 12 x 0.75 SI (.472 x 0.75 IS) - 400, 500, 600H, 6-600H, 660, 1000 and 3600 series HEX NUT Nickel plated HALF TOGGLE SILICONE BOOTS Black Red Green White U1151 U1151-6 U1151-3 U1151-7 Matte black U1153 U1153-6 U1153-3 U1153-7 HALF TOGGLE BLACK NEOPRENE BOOTS D12 Nickel plated U598 Matte black U600 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE For toggle bushing 11,9-32NS (15/32-32NS) - 12000, 3500 and 6000 series SEALING BOOTS FOR SWITCHES For pushbutton bushing 4 x 0.70 (.157 x 0.70) - 9500 series SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE HEX NUT Nickel plated PUSHBUTTON SILICONE BOOTS Black Red Green White U1829 U1829-6 U1829-3 U1829-7 Matte black U1831 U1831-6 U1831-3 U1831-7 D For pushbutton bushing 6,35-40NS (1/4-40NS) - 18000, 9000 and 13000 series NUT Knurled Nickel plated Knurled Matte black Hex Nickel plated Hex Matte black PUSHBUTTON SILICONE BOOTS Black Red Green White U1401 U1401-6 U1401-3 U1401-7 U1403 U1403-6 U1403-3 U1403-7 U1318 U1318-6 U1318-3 U1318-7 U1320 U1320-6 U1320-3 U1320-7 For pushbutton bushing 10 x 0.75 (.393 x 0.75) - 10400 series KNURLED NUT Nickel plated PUSHBUTTON SILICONE BOOTS Black Red Green White U1624 U1624-6 U1624-3 U1624-7 Matte black U1626 U1626-6 U1626-3 U1626-7 For pushbutton bushing 11,9-32NS (15/32-32NS) - 13000X778 and 13000X768 series HEX NUT Nickel plated PUSHBUTTON SILICONE BOOTS Black Red Green White U589 U589-6 U589-3 U589-7 Matte black U590 U590-6 U590-3 U590-7 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] D13 SEALING BOOTS FOR SWITCHES HEX NUT Nickel plated PUSHBUTTON SILICONE BOOTS Black Red Green White U1654 U1654-6 U1654-3 U1654-7 Matte black U1656 U1656-6 U1656-3 U1656-7 PUSHBUTTON BLACK NEOPRENE BOOTS Nickel plated U31 Matte black U225 Chrome plated U224 D For double sealing IP series TRANSPARENT SILICONE BOOT U5125 For external sealing on A02 series SILICONE BOOT A02WPC For 2600 series rocker switches TRANSPARENT SILICONE BOOT U2150 D14 APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE For pushbutton bushing 12 x 0.75 SI (.472 x 0.75) - 1200, 4700 and 4800 series VL SERIES LED INDICATORS FEATURES ● ● ● ● SPECIFICATIONS Insulation resistance: Dielectric strength: Electric life at high temperature: Torque: Climatic category: Protection level (sealed models): In accordance with NFC 93680 standard 1000 megohms min. 250 Vrms, 50 Hz min. 72 hours at 85°C 1.25 Nm (.922 ft.lb.) max.applied to nut 40/085/21 IP67 per IEC 529 LED SPECIFICATIONS MATERIALS (T ambient = 25°C) Forward voltage: Nominal current: Max. surge current: Max. reversed voltage: Max. forward current: Max. power dissipation: Bushing and collar: 2VDC (≤2.6V) 10mA 0.5 A (tp<10µs) 25V 40mA 100mW D Brass, bright or matte black chrome plated Lens: Polycarbonate Hardware supplied: 1 nickel plated brass hex nut; 9mm (.354") across flats for 6mm (.236") dia. indicator or 10mm (.393") across flats for 8mm (.314") dia. indicator. 3.90 DIA (.153 DIA) 6mm (.236") diameter - unsealed Red Yellow Green VL1000P600 VL1000P500 VL1000P300 VL100GP600 VL100GP500 VL100GP300 Note: Bright finish is standard. Arrow indicates bushing flat. Option: bushing without flat and lockwasher- on request 0.50 (.019) MATTE BLACK FINISH 5.50 (.216) BRIGHT FINISH 2.54 (.100) LED COLOR 0.50 (.019) (+) 9.00 DIA (.354 DIA) 6.00 DIA x 0.75 SI (.236 DIA x 0.75 IS) 2.50 (.098) 7.50 (.295) 1.30 Maxi (.051 MAX) (-) 8mm (.314") diameter - unsealed Red Yellow Green VL3000P600 VL3000P500 VL3000P300 VL300GP600 VL300GP500 VL300GP300 Note: Bright finish is standard. 0.50 (.019) MATTE BLACK FINISH 7.50 (.295) BRIGHT FINISH 0.50 (.019) (+) 2.54 (.100) LED COLOR 5.90 DIA (.232 DIA) 8.00 DIA x 0.75 SI (.314 DIA x 0.75 IS) 11.00 DIA (.433 DIA) SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE ● Indicators with red, yellow or green built-in LED. Flatted bushing for anti-rotation. 2 bushing diameters: 6mm (.236") and 8mm (.314"). Sealed and unsealed models. Bright chrome or matte black plated finishes. (-) 3.00 (.118) 11.00 (.433) 1.60 Maxi (.062 MAX) Arrow indicates bushing flat. Option: bushing without flat and lockwasher- on request APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] D15 VL SERIES LED INDICATORS 6mm (.236") diameter - sealed VL1CKGP600 VL1CKGP500 VL1CKGP300 Notes: Bright finish is standard. Lens cap is the same color as the LED. 1.30 Maxi (.051 MAX) Arrow indicates bushing flat. Option: bushing without flat and lockwasher- on request D 5.60 (.220) 0.50 (.019) VL1CK0P600 VL1CK0P500 VL1CK0P300 5.50 (.216) Red Yellow Green 0.50 (.019) (+) 2.54 (.100) MATTE BLACK FINISH 5.50 DIA (.216 DIA) BRIGHT FINISH 9.00 DIA (.354 DIA) O-RING LED COLOR (-) 5.70 (.224) 8mm (.314") diameter - sealed 5.90 DIA (.232 DIA) 8.00 DIA x 0.75 SI (.314 DIA x 0.75 IS) VL3CK0P600 VL3CK0P500 VL3CK0P300 VL3CKGP600 VL3CKGP500 VL3CKGP300 0.50 (.019) Red Yellow Green 7.50 (.295) MATTE BLACK FINISH 2.54 (.100) BRIGHT FINISH 0.50 (.019) (+) 9.50 DIA (.374 DIA) LED COLOR 12.70 DIA (.500 DIA) O-RING (-) Note: Bright finish is standard. Lens cap is the same color as the LED. 9.00 (.354) 7.00 (.275) 1.60 Maxi (.062 MAX) Arrow indicates bushing flat. Option: bushing without flat and lockwasher- on request LED'S 5.70 DIA (.224 DIA) 7.65 (.301) 11.40 (.448) Cathode 23.20 TYPE (.913) 2.54 (.100) Cathode 26.50 TYPE (1.043) 5.90 (.232) 2.54 (.100) LED's per customer specifications that meet drawings shown can be supplied - consult factory. 3.25 DIA (.127 DIA) 3.60 (.141) 2.80 DIA (.110 DIA) LED's are not removable. 8.60 (.338) 4.60 (.181) 4.95 DIA (.194 DIA) Observe polarity of DC supply to LED's. Longer lead is anode (+). Shorter lead is cathode (-) on flat side of bushing (see drawing). For 8mm (.314") indicators For 6mm (.236") indicators STANDARD HARDWARE AND PANEL CUT-OUTS 2.00 (.078) 9.00 (.354) 6.00 DIA x 0.75 SI (.236 DIA x 0.75 IS) For 6mm (.236") indicators D16 6.20 DIA (.244 DIA) 2.50 (.098) 3.00 (.118) 10.00 (.393) 8.00 DIA x 0.75 SI (.314 DIA x 0.75 IS) 8.20 DIA (.322 DIA) 3.50 (.137) For 8mm (.314") indicators APEM, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX: (781) 245-4531 E-mail: [email protected] SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE 3.90 DIA (.153 DIA) 6.00 DIA x 0.75 SI (.236 DIA x 0.75 IS)