Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection, 420 VAC/470 VAC Overview Applications Polypropylene metallized film with cylindrical aluminium can type filled with resin; faston, plastic deck or cable terminals and overpressure safety device. Typical applications include motor run P2 safety class: singlephase motors, low power electric motors and compressors. Benefits • • • • • Self-healing VDE, CQC and UL810 approved Rated frequency of 50 Hz and 60 Hz High capacitance density Safety device protection Part Number System C87 8 Series C87 = Motor Run Capacitors 0 = 10,000 hours/420 VAC (Class B) or 3,000 hours/470 VAC (Class C) 8 = 30,000 hours/420 VAC (Class A) or 10,000 hours/470 VAC (Class B) B Marking C870: C = Standard D = UL Z = Special C878: A = Standard B = UL Z = Special F Case & Fixing Bolt Code F = Cylindrical aluminum can with M8 bolt G = Cylindrical aluminum can with M12 bolt E= Without fixing bolt/flat bottom 3 Terminal Style 1 = Single faston 2.8 x 0.8 (hole) 2 = Single faston 6.3 x 0.8 3 = Double faston 6.3 x 0.8 4 = Single faston 2.8 x 0.8 (slot) 5 = Single faston 2.8 x 0.5 (hole) 4300 AA Capacitance Code Packaging (pF) Digits 2-4 indicate AA = the first three Standard digits of the capacitance value. First digit indicates the number of zeros to be added. 4 Internal Use 0, 1, 2, 4, 5 = Standard J Tolerance J = 5% K = 10% R = 0 to +10% X = Special tolerance One world. One KEMET © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3063_C87 • 11/20/2015 1 Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC Dimensions – Millimeters D H +1/-0 ±2 Mounting Stud (M) 25 25 25 30 30 30 35 35 35 35 40 40 45 45 45 50 55 60 60 48 60 78 48 60 78 48 60 78 98 78 98 78 98 133 133 133 98 133 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M8 x 10 M12 x 12.5 M12 x 12.5 M12 x 12.5 M12 x 12.5 © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3063_C87 • 11/20/2015 2 Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC Performance Characteristics Type of Service Continuous Operating Class C87/8 Class B 10,000 hours at 470 VAC, Class A 30,000 hours at 420 VAC C87/0 Class B 10,000 hours at 420 VAC, Class C 3,000 hours at 470 VAC C87/1 None C87/5 None Temperature Range Rated Voltage -25 to +85°C 470 VAC Rated Frequency 50 – 60 Hz Voltage Rise/Fall Time (Maximum) 0 = 15 V/μs 8 = 20 V/μs Maximum Permissible Voltage 1.10 x rated voltage Maximum Permissible Current 1.30 x rated current Dissipation Factor (DF) Safety Class Maximum Altitude Capacitance Tolerance Mounting Case Disk Filling Resin Dielectric Plates Test Voltage Terminal to Terminal (V TT) Test Voltage Terminal to Can (V TC) Total Harmonic Distortion Fire Load 20 x 10 -4 at +20°C, 50Hz P2 2,000 m ±5% Any position Aluminium Thermoplastic Polymer V0 (UL 94) Plastic deck with: - self-extinguishing features V0 (UL94) - GWT–GWFI–GWIT value in conformity with the Standard IEC60335-1 ed.4 par.30/EN60335-1 ed.3 par.30 Polyurethane Polypropylene Self-healing metal layer 2 Vn for 2 seconds 2,000 V for 2 seconds Up to 10% 40 MJ/kg Air Distance Between Live Parts ≥ 5 mm Air Distance Between Live Parts and Case ≥ 6 mm Vibration Test Maximum Tightening Torque IEC 68-2-6 5 Nm (M8), 10 Nm (M12) © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3063_C87 • 11/20/2015 3 Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC Table 1 – Ratings & Part Number Reference Capacitance Value (µF) VAC 16 18 20 20 22 25 25 30 35 40 45 50 60 70 75 75 80 100 100 100 110 1 1.5 1.8 2 2.5 3 3.5 4 5 6 7.5 8 10 11 12 15 16 20 23 25 29 30 46 50 55 60 8 8 10 12 12 16 16 20 25 30 40 1 2 2.5 Capacitance Value (µF) Maximum Dimensions in mm D H dV/dt (V/µs) 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 450 470 470 470 470 470 470 470 470 470 470 470 470 470 470 40 40 35 35 40 45 40 40 45 45 45 50 60 55 60 50 50 55 55 60 60 30 30 30 30 30 30 35 35 30 30 30 30 35 35 35 40 40 45 45 45 45 45 45 50 50 50 30 35 35 35 40 40 40 45 45 45 45 30 30 30 78 78 98 98 78 78 98 98 98 98 133 133 98 133 133 133 133 133 133 133 133 48 48 48 48 48 48 48 48 60 78 78 78 78 78 78 78 78 78 78 98 98 98 133 133 133 133 78 78 78 78 78 78 98 78 98 98 133 48 48 48 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 15 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Single Fast-On Single Fast-On Single Fast-On Single Fast-On Single Fast-On Single Fast-On Single Fast-On Single Fast-On Single Fast-On Single Fast-On Single Fast-On Double Fast-On Double Fast-On Double Fast-On C870CF35160AA1J C870CF35180AA0J C870CF35200AA0J C870CF35200AA1J C870CF35220AA0J C870CF35250AA0J C870CF35250AA1J C870CF35300AA1J C870CF35350AA0J C870CF35400AA0J C870CF35450AA0J C870CG35500AA1J C870CG35600AA5J C870CG35700AA1J C870CG35750AA0J C870CG35750AA2J C870CG35800AA2J C870CG36100AA0J C870CG36100AA0K C870CG36100AA1J C870CG36110AA0J C878BF34100SA4J C878BF34150SA4J C878ZF34180SA0J C878BF34200SA0J C878BF34250SA4J C878BF34300SA4J C878BF34350SA4J C878BF34400SA0J C878BF34500SA0J C878BF34600SA0J C878BF34750SA0J C878BF34800SA0J C878BF35100SA0J C878BF35110SA0J C878BF35120SA0J C878BF35150SA0J C878BF35160SA0J C878BF35200SA0J C878BF35230SA0J C878BF35250SA0J C878BF35290SA0J C878BF35300SA0J C878BF35460SA0J C878BF35500SA0J C878BF35550SA0J C878BF35600SA0J C878AF24800AA0J C878AF24800AA1J C878AF25100AA0J C878AF25120AA0J C878AF25120AA1J C878AF25160AA0J C878AF25160AA1J C878AF25200AA0J C878AF25250AA0J C878AF25300AA0J C878AF25400AA0J C878AF34100AA4J C878AF34200AA4J C878AF34250AA4J VAC B (mm) H (mm) dV/dt (V/µs) Termination Part Number © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Termination Part Number F3063_C87 • 11/20/2015 4 Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC Table 1 – Ratings & Part Number Reference cont'd Capacitance Value (µF) VAC 3 3.5 4 5 6 6 7.5 7.5 8 9 10 11 12 12 12.5 14 15 16 16 16 18 20 22.5 25 30 30 31.5 35 40 40 45 50 50 55 60 60 80 Capacitance Value (µF) Maximum Dimensions in mm D H dV/dt (V/µs) 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 470 30 35 35 35 30 35 30 35 30 35 35 35 35 40 35 40 40 40 40 35 45 45 45 45 45 45 45 45 45 50 50 50 55 50 50 60 60 48 48 48 48 78 78 78 60 78 78 78 78 78 78 78 78 78 78 98 98 78 78 78 98 98 133 98 133 133 133 133 133 133 133 133 133 133 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On Double Fast-On C878AF34300AA4J C878AF34350AA4J C878AF34400AA4J C878AF34500AA4J C878AF34600AA0J C878AF34600AA1J C878AF34750AA0J C878AF34750AA2J C878AF34800AA0J C878AF34900AA0J C878AF35100AA0J C878AF35110AA0J C878AF35120AA0J C878AF35120AA1J C878AF35125AA0J C878AF35140AA0J C878AF35150AA0J C878AF35160AA0J C878AF35160AA1J C878AF35160AA2J C878AF35180AA0J C878AF35200AA0J C878AF35225AA0J C878AF35250AA0J C878AF35300AA0J C878AF35300AA1J C878AF35315AA0J C878AF35350AA0J C878AF35400AA0J C878AG35400AA2J C878AG35450AA0J C878AG35500AA0J C878AG35500AA1J C878AG35550AA0J C878AG35600AA0J C878AG35600AA1J C878AG35800AA0J VAC B (mm) H (mm) dV/dt (V/µs) Termination Part Number © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com Termination Part Number F3063_C87 • 11/20/2015 5 Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC Expected Life Hours C878 C870 Marking MKP C87 Capacitance Tolerance/Safety Class Capacitor Class Climate Class Rated Voltage based on UL Standards UL Approvals Self-Healing dielectric Data Code © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3063_C87 • 11/20/2015 6 Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC Dissipation Factor Dissipation factor is a complex function involved with the inefficiency of the capacitor. The tgδ may change up and down with increased temperature. For more information, please refer to Performance Characteristics. Sealing Hermetically Sealed Capacitors When the temperature increases, the pressure inside the capacitor increases. If the internal pressure is high enough, it can cause a breach in the capacitor which can result in leakage, impregnation, filling fluid or moisture susceptibility. Resin Encased/Wrap & Fill Capacitors The resin seals on resin encased and wrap and fill capacitors will withstand short-term exposure to high humidity environments without degradation. Resins and plastic tapes will form a pseudo-impervious barrier to humidity and chemicals. These case materials are somewhat porous and through osmosis can cause contaminants to enter the capacitor. The second area of contaminated absorption is the lead-wire/resin interface. Since resins cannot bond 100% to tinned wires, there can be a path formed up to the lead wire into the capacitor section. Aqueous cleaning of circuit boards can aggravate this condition. Barometric Pressure The altitude at which hermetically sealed capacitors are operated controls the voltage rating of the capacitor. As the barometric pressure decreases, the susceptibility to terminal arc-over increases. Non-hermetic capacitors can be affected by internal stresses due to pressure changes. This can be in the form of capacitance changes or dielectric arc-over as well as low insulation resistance. Heat transfer can also be affected by altitude operation. Heat generated in operation cannot be dissipated properly and can result in high RI2 losses and eventual failure. Radiation Radiation capabilities of capacitors must be taken into consideration. Electrical degradation in the form of dielectric embitterment can take place causing shorts or opens. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3063_C87 • 11/20/2015 7 Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC Environmental Compliance As an environmentally conscious company, KEMET is working continuously with improvements concerning the environmental effects of both our capacitors and the production of them. In Europe (RoHS Directive) and in some other geographical areas like China, legislation has been put in place to prevent the use of some hazardous materials, like Lead (Pb), in electronic equipment. All products in this catalog are produced to help our customers' obligations to guarantee their products to fulfill these legislative requirements. The only material of concern in our products has been Lead (Pb), which has been removed from all designs to fulfill the requirement of containing less than 0.1% of Lead in any homogeneous material. KEMET will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. Some customer segments like Medical, Military and Automotive Electronics may still require the use of Lead in electrode coatings. To clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for RoHS compatible capacitors. Because of customer requirements there may appear additional markings like LF = Lead Free or LFW = Lead Free Wires on the label. Materials & Environment The selection of materials used by KEMET for the production of capacitors is the result of extensive experience and constant attention to environmental protection. KEMET selects its suppliers according to ISO 9001 standards and carries out statistical analysis on the materials purchased before acceptance. All materials are, to the company's present knowledge, non-toxic and free from Cadmium, Mercury, Chrome and compounds, PCB (Polychlorine Triphenyl), Bromide and Chlorine Dioxins Bromurate Clorurate, CFC and HCFC and Asbestos. Green Products All KEMET power film products are ROHS Compliant. Insulation Resistance When the capacitor temperature increases, the insulation resistance decreases. This is due to increased electron activity. Low insulation resistance can also be the result of moisture trapped in the windings, caused by a prolonged exposure to excessive humidity. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3063_C87 • 11/20/2015 8 Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC KEMET Corporation World Headquarters Europe Asia Southern Europe Sasso Marconi, Italy Tel: 39-051-939111 Northeast Asia Hong Kong Tel: 852-2305-1168 Mailing Address: P.O. Box 5928 Greenville, SC 29606 Skopje, Macedonia Tel: 389-2-55-14-623 Shenzhen, China Tel: 86-755-2518-1306 www.kemet.com Tel: 864-963-6300 Fax: 864-963-6521 Central Europe Landsberg, Germany Tel: 49-8191-3350800 Corporate Offices Fort Lauderdale, FL Tel: 954-766-2800 Kamen, Germany Tel: 49-2307-438110 North America Northern Europe Wyboston, United Kingdom Tel: 44-1480-273082 Taipei, Taiwan Tel: 886-2-27528585 Espoo, Finland Tel: 358-9-5406-5000 Southeast Asia Singapore Tel: 65-6701-8033 2835 KEMET Way Simpsonville, SC 29681 Northeast Wilmington, MA Tel: 978-658-1663 Southeast Lake Mary, FL Tel: 407-855-8886 Central Novi, MI Tel: 248-994-1030 Beijing, China Tel: 86-10-5877-1075 Shanghai, China Tel: 86-21-6447-0707 Seoul, South Korea Tel: 82-2-6294-0550 Penang, Malaysia Tel: 60-4-6430200 Bangalore, India Tel: 91-806-53-76817 Irving, TX Tel: 972-915-6041 West Milpitas, CA Tel: 408-433-9950 Mexico Guadalajara, Jalisco Tel: 52-33-3123-2141 Note: KEMET reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. KEMET does not assume any responsibility for infringement that might result from the use of KEMET Capacitors in potential circuit designs. KEMET is a registered trademark of KEMET Electronics Corporation. © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3063_C87 • 11/20/2015 9 Motor Run Capacitors C87 Series, Cylindrical Aluminum Case, Overpressure Protection 420 VAC/470 VAC Prototype Sample Disclaimer The Customer acknowledges the following limitations of the prototype samples: (1) Prototype samples are manufactured from preliminary designs and manufacturing processes; may not represent final designs; have not been released for commercial use and are not subject to the same quality control procedures applicable to released products. (2) Prototype samples are not qualified parts and are provided “as-is” by KEMET Electronics Corporation, which specifically disclaims any and all warranties and guarantees, explicit or implied, including, without limitation, the warranties of merchantability and fitness for a particular purpose or use. (3) Prototype samples are not intended for commercial use; are provided for engineering evaluation only and are not recommended for use in the Customer’s production line. (4) The Customer assumes the risk ofany and alluses that the Customer makes of the prototype samples. General Disclaimer “All product specifications, statements, information and data given herein are believed to be accurate and reliable, but are presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on our knowledge of typical operating conditions for such applications, but are not intended to constitute – and we specifically disclaim – any warranty concerning suitability for a specific customer application or use. This Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. KEMET’s product warranty is set forth at www.kemet.com under Terms and Conditions of Sale.” © KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F3063_C87 • 11/20/2015 10