D TYPE CONNECTORS - TURNED PIN PCB - RIGHT ANGLE PIN 9, 15, 25, 37 or 50 way Turned Pin (Machined) Contact Gold Plated Contacts Yellow Zinc Metal or Tin Housings available Current Rating - 5Amps SPECIFICATION Mechanical: Electrical: Termination: Polarisation: Coupling: Withdrawal force: Material and Finishes: Insulators: Contacts: Insertion Cycles: KB 220 according to DIN 53480 5A per contact with 20AWG cable 300V rms 1000V rms below 5 x 10 -3Ω over 10MΩ - 55°C to 125°C OUTLINE DRAWING PANEL CUT OUT 9 WAY 15 WAY 25 WAY 37 WAY 50 WAY B D B F 2.5 2.5 G 3.2ø 10ϒ E 4.5 3.2ø 10ϒ B C D E F G 25.0 33.3 47.0 63.5 61.1 12.4 12.4 12.4 12.4 15.4 22.2 30.5 44.3 60.7 58.3 13.0 13.0 13.0 13.0 13.0 20.5 28.8 42.5 59.1 56.3 11.4 11.4 11.4 11.4 14.1 Dimension - mm PLUG SOCKET A 30.8 39.2 53.1 69.5 67 0.6 50 WAY A 10 " " STRAIGHT pins for to PCB 4 C 6 4 B 5 SHELL DIMENSIONS 1 9.4 2.54 90° right angled pins for PCB ORDERING INFORMATION DBC TD Dubilier Connectors Series TD = Turn Pin D SR 09 Connector Type Contact Style Nº of Ways M1 = Male(plug) zinc F1 = Female(socket) zinc M2 = Male (Plug) Tin F2 = Female (Socket) Tin SR = Solder Right Angled 09 = 9ways 15 = 15ways 25 = 25ways 37 = 37ways 50 = 50ways M1 3 A A = Bracket, board and screwlocks 267 Fax: 01371 875075 www.dubilier.co.uk Tel: 01371 875758 SECTION 11 Creeping Current Stability: Working Current: Working Voltages: Test Voltage: Contact Resistance: Insulation Resistance: Temperature Range: Hand Solder Dip Solder straight Dip Solder 90°C Wire Wrap 0.6 x 0.6mm by trapezoidal shell by friction, locking by special accessories ca. 0.5 N per contact Shell steel with yellow passivation over zinc plate (standard), steel nickel plated and tinned Two part mouldings, polyester, glass fibre re-enforced, flame retarded according UL 94 V0 Gold plated over nickel 500