Internal Connectors Series MatchCon 180° Female Box Header w. and w/o Lock, (1.27mm Pitch) TH Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Voltage Rating: Operating Temp. Range: 1,000MΩ min. 500V ACrms for 1 minute 20mΩ max. 1.0A AC/DC 30V AC/DC –40°C to +105°C MBS - 16 - T 1 - LL - * Series (female) Pin Count Termination Type: T = TH Materials and Finish 1 = 180° Type Insulator: High Temperature Plastic UL94V-0 Contacts: Phosphor Bronze Plating: Tin over Nickel (matt finish) Plating: Mating / Termination Area LL = Tin / Tin Features 1 = with Locking 0 = without Locking 1.27mm staggered centre line Additional positioning spring absorbs relative movements Air tight connection Outline Dimensions with locking Outline Dimensions without locking PCB Layout Standard Types Part Number Pin Count A B C D MBS-6-T1-LL-* 6 12.24 6.35 8.14 9.54 MBS-8-T1-LL-* 8 14.78 8.89 10.68 12.08 MBS-10-T1-LL-* 10 17.32 11.43 13.22 14.62 MBS-12-T1-LL-* 12 19.86 13.97 15.76 17.16 MBS-14-T1-LL-* 14 22.40 16.51 18.30 19.70 MBS-16-T1-LL-* 16 24.94 19.05 20.84 22.24 B C D For the following pin counts are available on request, please contact Yamaichi Part Number Pin Count A MBS-4-T1-LL-* 4 9.70 3.81 5.60 7.00 MBS-18-T1-LL-* 18 27.48 21.59 23.38 24.78 MBS-20-T1-LL-* 20 30.02 24.13 25.92 27.32 MBS-22-T1-LL-* 22 32.56 26.67 28.46 29.86 MBS-24-T1-LL-* 24 35.10 29.21 31.00 32.40 MBS-26-T1-LL-* 26 37.64 31.75 33.54 34.94 D-50 Connectors SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Series MatchCon 180° Female Box Header w. and w/o Lock, (1.27mm Pitch) SMT Internal Connectors Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Voltage Rating: Operating Temp. Range: 1,000MΩ min. 500V ACrms for 1 minute 20mΩ max. 1.0A AC/DC 30V AC/DC –40°C to +105°C MBS - 16 - S 1 - LL * Series (female) No. of Pins Termination Type: S = SMT Materials and Finish 1 = 180° Type Insulator: High Temperature Plastic UL94V-0 Contacts: Phosphor Bronze Plating: Tin over Nickel (matt finish) Plating: Mating / Termination Area LL = Tin / Tin Features 1 = with Locking 0 = without Locking 1.27mm staggered centre line Additional positioning spring absorbs relative movements Air tight connection Outline Dimensions with locking 1.27mm Board-to-Board Connectors Outline Dimensions without locking PCB Layout Standard Types Part Number Pin Count A B C D MBS-6-S1-LL-* 6 12.24 6.35 8.14 9.54 MBS-8-S1-LL-* 8 14.78 8.89 10.68 12.08 MBS-10-S1-LL-* 10 17.32 11.43 13.22 14.62 MBS-12-S1-LL-* 12 19.86 13.97 15.76 17.16 MBS-14-S1-LL-* 14 22.40 16.51 18.30 19.70 MBS-16-S1-LL-* 16 24.94 19.05 20.84 22.24 For the following pin counts are available on request, please contact Yamaichi Part Number C D MBS-4-S1-LL-* 4 9.70 3.81 5.60 7.00 MBS-18-S1-LL-* 18 27.48 21.59 23.38 24.78 MBS-20-S1-LL-* 20 30.02 24.13 25.92 27.32 MBS-22-S1-LL-* 22 32.56 26.67 28.46 29.86 MBS-24-S1-LL-* 24 35.10 29.21 31.00 32.40 MBS-26-S1-LL-* 26 37.64 31.75 33.54 Trading Division Pin Count A B SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER 34.94 Connectors D-51 Internal Connectors Series MatchCon 180° Male Box Header, (1.27mm Pitch) TH Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Voltage Rating: Operating Temp. Range: 1,000MΩ min. 500V ACrms for 1 minute 20mΩ max. 1.0A AC/DC 30V AC/DC –40°C to +105°C MBP - 16 - T1 - LL - 0 Series (male) Pin Count Termination Type: T1 = TH (180° ) Materials and Finish Insulator: High Temperature Plastic UL94V-0 Contacts: Phosphor Bronze Plating: Tin over Nickel (matt finish) Plating: Mating / Termination Area LL = Tin / Tin 0 = Without Locking Features 1.27mm staggered centre line Additional positioning spring absorbs relative movements Air tight connection Outline Dimensions 180° PCB Layout Standard Types Part Number Pin Count A B MBP-6-T1-LL-0 6 9.74 MBP-8-T1-LL-0 8 12.28 5.08 7.62 MBP-10-T1-LL-0 10 14.82 10.16 MBP-12-T1-LL-0 12 17.36 12.70 MBP-14-T1-LL-0 14 19.90 15.24 MBP-16-T1-LL-0 16 22.44 17.78 For the following pin counts are available on request, please contact Yamaichi Part Number Pin Count A B MBP-4-T1-LL-0 4 7.20 MBP-18-T1-LL-0 18 24.98 20.32 MBP-20-T1-LL-0 20 27.52 22.86 MBP-22-T1-LL-0 22 30.06 25.40 MBP-24-T1-LL-0 24 32.60 27.94 MBP-26-ST1-LL-0* 26 35.14 30.48 D-52 Connectors 2.54 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Internal Connectors Series MatchCon 90° Female Box Header (1.27mm Pitch) TH Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Voltage Rating: Operating Temp. Range: 1,000MΩ min. 500V ACrms for 1 minute 20mΩ max. 1.0A AC/DC 30V AC/DC –40°C to +105°C MBS - 16 - T9 - LL - 0 Series (female) Pin Count Termination Type: T9 = TH (90° ) Materials and Finish Insulator: High Temperature Plastic UL94V-0 Contacts: Phosphor Bronze Plating: Tin over Nickel (matt finish) Plating: Mating / Termination Area LL = Tin / Tin 0 = Without Locking Features 1.27mm staggered centre line Additional positioning spring absorbs relative movements Air tight connection Outline Dimensions (90°) 1.27mm Board-to-Board Connectors PCB Layout Standard Types Part Number Pin Count A B MBS-6-T9-LL-0 6 9.74 MBS-8-T9-LL-0 8 12.28 5.08 7.62 MBS-10-T9-LL-0 10 14.82 10.16 MBS-12-T9-LL-0 12 17.36 12.70 MBS-14-T9-LL-0 14 19.90 15.24 MBS-16-T9-LL-0 16 22.44 17.78 For the following pin counts are available on request, please contact Yamaichi Part Number Pin Count A B MBS-4-T9-LL-0 4 7.20 MBS-18-T9-LL-0 18 24.98 20.32 MBS-20-T9-LL-0 20 27.52 22.86 MBS-22-T9-LL-0 22 30.06 25.40 MBS-24-T9-LL-0 24 32.60 27.94 MBS-26-ST9-LL-0 26 35.14 30.48 Trading Division 2.54 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors D-53 Internal Connectors Series MatchCon 90° Male IDC Paddle Type (1.27mm Pitch) TH Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Voltage Rating: Operating Temp. Range: 1,000MΩ min. 500V ACrms for 1 minute 20mΩ max. 1.0A AC/DC 30V AC/DC –40°C to +105°C MCP - 16 - T I 9 - LL Series (male) No. of Pins Termination Type: T = TH I = IDC Materials and Finish Insulator: High Temperature Plastic UL94V-0 Contacts: Phosphor Bronze Plating: Tin over Nickel (matt finish) 9 = 90° Type Features 1.27mm staggered centre line Additional positioning spring absorbs relative movements Air tight connection Outline Dimensions (TH 90°) Plating: Mating / Termination Area LL = Tin / Tin Applicable Cables AWG 27 stranded wire, 1.27mm pitch (e.g. DK**-*, see Section F) PCB Layout Standard Types Part Number Pin Count A B MCP-6-TI9-LL 6 10.99 MCP-8-TI9-LL 8 13.53 5.08 7.62 MCP-10-TI9-LL 10 16.07 10.16 MCP-12-TI9-LL 12 18.61 12.70 MCP-14-TI9-LL 14 21.15 15.24 MCP-16-TI9-LL 16 23.69 17.78 For the followiing pin counts are available on request, please contact Yamaichi Part Number Pin Count A B MCP-4-TI9-LL 4 8.45 MCP-18-TI9-LL 18 26.23 20.32 MCP-20-TI9-LL 20 28.77 22.86 MCP-22-TI9-LL 22 31.31 25.40 MCP-24-TI9-LL 24 33.85 27.94 MCP-26-TI9-LL 26 36.39 30.48 D-54 Connectors 2.54 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Trading Division Internal Connectors Series MatchCon 90° Male IDC for Flat Cable (1.27mm Pitch) Part Number (Details) Specifications Insulation Resistance: Withstanding Voltage: Contact Resistance: Current Rating: Voltage Rating: Operating Temp. Range: 1,000MΩ min. 500V ACrms for 1 minute 20mΩ max. 1.0A AC/DC 30V AC/DC –40°C to +105°C MCP - 16 - I 9 - LL Series (male) No. of Pins Termination Type: I = IDC Materials and Finish Insulator: High Temperature Plastic UL94V-0 Contacts: Phosphor Bronze Plating: Tin over Nickel (matt finish) 9 = 90° Type Plating: Mating / Termination Area LL = Tin / Tin Features 1.27mm staggered centre line Additional positioning spring absorbs relative movements Air tight connection Applicable Cables AWG 27 stranded wire, 1.27mm pitch (e.g. DK**-*, see Section F) 1.27mm Board-to-Board Connectors Outline Dimensions (90°) Standard Types Part Number Pin Count A B MCP-6-I9-LL 6 10.99 MCP-8-I9-LL 8 13.53 5.08 7.62 MCP-10-I9-LL 10 16.07 10.16 MCP-12-I9-LL 12 18.61 12.70 MCP-14-I9-LL 14 21.15 15.24 MCP-16-I9-LL 16 23.69 17.78 For the followiing pin counts are available on request, please contact Yamaichi Part Number Pin Count A B MCP-4-I9-LL 4 8.45 MCP-18-I9-LL 18 26.23 20.32 MCP-20-I9-LL 20 28.77 22.86 MCP-22-I9-LL 22 31.31 25.40 MCP-24-I9-LL 24 33.85 27.94 MCP-26-I9-LL 26 36.39 30.48 Trading Division 2.54 SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER Connectors D-55