EDA60 SERIES AC-DC ENCLOSED SWITCHING POWER SUPPLY FEATURES ‧UNIVERSAL INPUT 88~264VAC ‧SHORT CIRCUIT PROTECTION ‧INTERNAL INPUT FILTER ‧3 YEARS WARRANTY ‧HIGH EFFICIENCY UP TO 89% ‧HIGH AVERAGE EFFICIENCY MEET ErP (except 5V model) ‧LOW STANDBY POWER CONSUMPTION R H a UL 60950-1 EN 60950-1 MODEL LIST MODEL NO. INPUT VOLTAGE OUTPUT WATTAGE OUTPUT VOLTAGE OUTPUT CURRENT EFF. (min.) EFF. (typ.) EFF. (avg.) Single Output Models EDA60-05 88~264 VAC 45 WATTS + 5 VDC 9000 mA 80% 82% 81% EDA60-12 88~264 VAC 60 WATTS + 12 VDC 5000 mA 86% 88% 87% EDA60-15 88~264 VAC 60 WATTS + 15 VDC 4000 mA 87% 89% 87% EDA60-24 88~264 VAC 60 WATTS + 24 VDC 2500 mA 87% 89% 87% SPECIFICATION o All Specifications Typical At Nominal Line, Full Load, 25 C Unless Otherwise Noticed GENERAL Characteristics typ. typ. min. Conditions max. unit Switching frequency Vi nom, Io nom Isolation voltage Input-Output 3,000 / 4,242 VAC / VDC Input-FG 1,500 / 2,121 VAC / VDC 500 / 710 VAC / VDC 100 MΩ 40 Output-FG Isolation resistance Input-Output, @ 500VDC Ambient temperature Operating at Vi nom 100 + 71 -40 o o KHz o C % / oC Derating (see derating curve) Vi nom, from 61 C to +71 C Storage temperature Non operational -40 + 85 Relative humidity Vi nom, Io nom 20 95 % RH Temperature coefficient Vi nom, Io min ± 0.03 % / oC MTBF Altitude during operation o Bellcore Issue 6 @40 C, GB www.chinfa.com 2014.07.09 o C 5V 618,000 Hours 12V 642,000 Hours 15V 645,000 Hours 24V 677,000 Hours IEC 60068-2-13 Dimension Cooling 2.5 4,850 L98 x W82 x H35 m mm Free air convection [email protected] P1 EDA60 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed INPUT SPECIFICATIONS Characteristics Conditions Rated input voltage Absolute input max. range Io nom Input current Rated input current Line frequency Vi : 115 / 230 VAC, Io nom Vi : 88 VAC, Io nom Vi nom, Io nom Vi : 115 / 230 VAC , Io nom Vi : 230 VAC, Io nom Inrush current Power dissipation Leakage current Standby power consumption min. AC in DC in Input-Output Input-FG Vi nom, Io=0A typ. 100 88 120 max. unit 240 264 375 0.25 3.5 0.3 0.5 VAC VAC VDC mA mA Hz A W W W W mA mA W W max. unit +1 % 1,100 / 600 1,500 63 30 / 60 47 5V 12V 15V 24V 11 10 9 8 5V 12V, 15V, 24V OUTPUT SPECIFICATIONS Characteristics Conditions min. Output voltage accuracy (Adjusted before shipment) Vi nom, Io max 0 Minimum load Line regulation Vi nom Io nom, Vi min ...Vi max 0 Load regulation Vi nom, Io min ...Io nom Voltage trim range Vi nom, 0.8 Io nom Rated continuous loading Vi nom typ. % ± 0.5 % VDC % 5V 4.5 ±1 5.5 12V 15V 10.8 13.2 VDC 13.5 16.5 VDC 24V 5V 27.6 21.6 9 A @ 5Vdc / 8.1 A @ 5.5 Vdc VDC 5 A @ 12Vdc / 4.5 A @ 13.2 Vdc 12V 15V 4 A @ 15Vdc / 3.6 A @ 16.5 Vdc 2.5 A @ 24Vdc / 2.15 A @ 27.6 Vdc 24V Hold up time Vi : 115 / 230 VAC , Io nom Turn on time Vi nom, Io nom 5V, 12V & 15V models 24V model 1,500 ms ms 2,000 ms Vi nom, Io nom 5V, 12V &15V models : with 7000μF CAP 24V model : with 3500μF CAP 2,000 ms 2,500 ms 150 ms 500 ms 150 ms Rise time 10 / 80 Vi nom, Io nom Vi nom, Io nom 5V, 12V &15V models : with 7000μF CAP 24V model : with 3500μF CAP Fall time Transient recovery time Vi nom, Io nom Ripple & noise Vi nom, Io nom, BW = 20MHz Power back immunity Vi nom, Io nom 1 second Vi nom, 1~0.5 Io nom Vi nom, Io nom Efficiency Vi nom, Io nom, Po / Pi ms 100 mV 5V 7.5 VDC 12V 15V 18 VDC 22 35 VDC 24V 5V, 12V &15V Capacitor load 2 24V 7,000 VDC μF μF 3,500 Up to 89%, See model list and typ efficiency curve CONTROL AND PROTECTION Characteristics Conditions min. Input fuse Internal surge voltage protection Rated over load protection www.chinfa.com 2014.07.09 typ. max. unit T2A / 250VAC internal IEC 61000-4-5 Vi nom (see typ current limited curve) Varistor 110 150 % [email protected] P2 EDA60 SERIES SPECIFICATION All Specifications Typical At Nominal Line, Full Load, 25oC Unless Otherwise Noticed CONTROL AND PROTECTION Characteristics Over voltage protection typ. min. max. unit 5V 5.75 6.75 VDC 12V 13.8 16.2 VDC 15V 17.25 20.25 VDC 24V 28.8 32.4 VDC Conditions Vi nom, 0.8 Io nom (Auto Recovery) Output short circuit Hiccup mode APPROVALS AND STANDARDS UL / cUL UL 60950-1 Recognized TUV EN 60950-1 CE EN 61000-6-3, EN 55022 Class B, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 55024 EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8 EN 61000-4-11, ENV 50204, EN 61204-3 Vibration resistance meet IEC 60068-2-6 (10-500 Hz, 2G, along X, Y, Z each Axis, 60 min for each Axis ) Shock resistance meet IEC 60068-2-27 (15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face) PHYSICAL CHARACTERISTICS Case size 98 x 82 x 35 mm (3.86 x 3.23 x 1.38 inches) Case material Metal Weight 310 g Packing 0.34kg ; 45 / 16kg / 1.01CUFT MECHANISM & PIN CONFIGURATION mm [inch] 55.00 [2.17] 8.20 [0.32] 9.50 [0.37] 19.50 [0.77] INSTALLATION 2-M3 L=Max 4mm Vout ADJ. 4.00 [0.16] 98.00 [3.86] 5.50 [0.22] 82.00 [3.23] Ventilation / Cooling Normal convection Connector size range AWG22-14 (0.2~2mm2 ) flexible / solid cable, connector can withstand torque at maximum 12 pound-inches. GENERAL TOLERANCE 0.00[0.00] - 30.00[1.18] ±0.30[0.01] 30.00[1.18] - 120.00[4.72] ±0.50[0.02] 5.00 [0.20] 88.5 [3.48] 40.00 [1.57] 40.5 [1.59] 4.40 82.00 [3.23] 87.00 [3.43] 17.00 [0.67] www.chinfa.com 2014.07.09 35.00 [1.38] 2-M3 L=Max 8mm 17.50 [0.69] 3.5 35.00 [1.38] 3.5 28.00 [1.10] 1 L 2 (AC) N 3 4 5 V +V +V Vout AD 74.00 [2.91] [email protected] P3 EDA60 SERIES PIN ASSIGNMENT Designation PIN NO. Input terminals (phase conductor, no polarity at DC input) Input terminals (neutral conductor, no polarity at DC input) IN 2 Description L N OTHER OUT 1 V - Negative output terminal V+ Vout ADJ. Positive output terminal DC ON Operation indicator LED Ground this terminal to minimize high-frequency emissions 3 4 5 Trimmer-potentiometer for Vout adjustment CIRCUIT SCHEMATIC ‧Block diagram for EDA60 series L Fuse Vo + Rectifier Line Filter Inrush Current Switching Limiter and Device Rectifier Vo - N Y Control Circuit FG Opto Isolation Reference & Error Amp. Vout ADJ. TYP. CURRENT LIMITED CURVE Output Voltage [ % ] v EDA60 Hiccup mode 100 50 t Time DERATING CURVE TYP. EFFICIENCY CURVE EDA60-24 90 88 EFFICIENCY [ % ] Power out [ % ] 100 75 Safe Operating Area 0 -40 o 61 Temperature [ C ] www.chinfa.com 2014.07.09 71 86 84 82 80 10 230 Vac 115 Vac 25 50 Power out [ % ] 75 100 [email protected] P4