Source OTP-345V1-PB-155-I Fsan high power triplexer Datasheet

FSAN High Power Triplexer
OTP-345V1-PF-622-SCA-D4
Features
• Low Cost 1310nm FP Design, 1490nm Digital Receiver, and
1555nm Analog Receiver
• High Isolation
• Multiple TIA Version for 155, 622, 1250 Mbps Applications
• 1 GHz Video Reciever Bandwidth
• Compliant to FSAN Class B ITU-T G.983.3 Specification
• Support ITR-B1F-AF4-1
Absolute Maximum Ratings
Parameter
Min
Typical
Max
Unit
Operating Temperature
-40
-
85
ºC
Storage Temperature
-40
-
85
ºC
Module Characteristics Note1
Parameter
(a)
Min
Typical
Max
Unit
32
-
-
dB
1490nm data to 1555nm Rx isolation (b)
34
-
-
dB
1310nm external to 1555nm Video isolation
22
-
-
dB
1310nm external to 1490nm data isolation
17
-
-
dB
1310nm Tx to 1490nm Rx crosstalk
-
-
-47
dB
1310nm Tx to 1555nm Rx crosstalk
-
-
-47
dB
Back Reflection @ 1310nm
-
-
-6
dB
Back Reflection @ 1555nm
-
-
-32
dB
Back Reflection @ 1490nm
-
-
-20
dB
1555nm Video to 1490nm Rx isolation
Note 1) All data is specified at EOL and across the operating temperature range.
(a) 1550nm to 1560nm isolation at digital receiver
(b) 1480nm to 1500nm isolation at video receiver
Transmitter Characteristics Note1
Parameter
Symbol
Min
Typical
Max
Unit
Wavelength
λ
1260
-
1360
nm
Spectral Width
∆λ
-
2
3
nm
Typical 1/2 Ppeak set point @25ºC
Pset
-
1.5
-
dBm
Tracking Error
TE
-3
-
3
dB
1/2 Ppeak over temp
1/2Ppeak
0.5
-
3.5
dBm
Bias Current (=Ith+1/2Imod)
Ibias,EOL
-
-
75
mA
Ith
2
-
50
mA
Threshold Current
(e)
Modulation Current
Imod
10
-
60
mA
PD Monitor Current (@ Pset) @25ºC
(@ Pset)
IPD,mon
100
-
1500
µA
PD Monitor Current (@ Pset) -40ºC and 85ºC
IPD,mon
100
-
1300
µA
Forward Voltage
Vf
-
1.2
1.7
Volts
Rise/Fall Time (c)
tr/tf
-
-
0.5
ns
µA
ID
-
-
1
PD Monitor Capacitance (d)
PD Monitor Dark Current
CPD
-
10
15
pF
Quantum Efficiency
QE
0.045
-
0.3
mW/mA
Note 1) All data is specified at EOL and across the operating temperature range.
(c) 10% to 90%
(d) VRD = 10V
(e) greater modulation current can be used to increase output power
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
1
LUMNDS826-AUG0105
rev. A.1
FSAN High Power Triplexer
OTP-345V1-PF-622-SCA-D4
Digital Receiver Electrical Characteristics (622 Mbps)
Parameter
Symbol
Min
Typical
Max
Unit
Detection Wavelength
λ
1480
-
1500
nm
Gain, Differential
G
12
-
-
mV/µW
-
-
-
-29
dBm
Pin
-4
-
-
dBm
3
-
-
dBm
Sensitivity
Optical Input Overload
Optical Input Power Damage Threshold
Supply Voltage
VCC
3.135
3.3
3.465
V
Supply Current (a)
ICC
20
35
50
mA
MHz
High Frequency -3 dB point (b)
f-3dB(h)
400
520
600
Vo(se)(p-p)
-
-
450
mV
Ro(se)
40
50
62
Ohm
Small Signal Transresistance, differential
Rtr
7
-
25
KΩ
Polarization Dependent Loss
PDL
-
-
0.5
dB
Unit
Single-ended Output Voltage (p-p) @100mA p-p
Single-ended Output Resistance
(a) AC coupled; RL = 50 Ohm
(b) Ci = 0.7 pF
Analog Receiver Characteristics
Parameter
Detection Wavelength
Optical Input power Damage Threshold
Symbol
Min
Typical
Max
λ
1550
1555
1560
nm
Pdamage
3
-
-
dBm
Responsivity
R
0.75
0.85
-
mA/mW
Bandwidth (a)
BW
1000
-
-
MHz
Dark Current at Vr=5V
Id
-
2
50
nA
Capacitance at Vr =5V and 1 MHz
C
-
0.6
1.5
pF
-
-
-70
dBc
-
-
-80
dBc
-
-
0.5
dB
DSO
DTB
Polarization Dependent Loss
PDL
(a) 0.5 dB measurement
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
2
LUMNDS826-AUG0105
rev. A.1
FSAN High Power Triplexer
OTP-345V1-PF-622-SCA-D4
Outline Drawing
Mechanical
Drawing
PIN
PIN-TIA
PIN-TIA Pin Assignment
PD+
PD-
Functional Schematic
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
3
LUMNDS826-AUG0105
rev. A.1
FSAN High Power Triplexer
OTP-345V1-PF-622-SCA-D4
Ordering Information
Available Options:
OTP-345V1-PF-622-SCA-D4
Part Numbering Definition:
M in.
OTP - 345V 1 - Half Peak Output Pow er -
Connector
Digital TIA - Isolator - Connector Type - Design specific
-
• Blank = No TIA
155
• PX
PA A = -13 to -16dBm
PA = -9 to -13 dBm
PB = -6 to -9 dBm
PC = -3 to -6 dBm
PD = -1 to -3 dBm
PE = -1 to +1 dBm
PF = +1 to +3 dBm
• Blank = Pigtail
RL = Receptacle LC
RS = Receptacle SC
622
1250
• Blank = No Isolator
I = Isolator
• SCX
LCX
FCX
STX
X = A (angled)
X = U (ultra)
• D4 : PIN and PIN TIA assignments rotate
180 aegree, Customer P/N:728-000261-06
Warnings:
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended.
Follow guidelines according to proper ESD procedures.
Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Notes:
IMPORTANT NOTICE!
All information contained in this document is subject to change without notice, at LuminentOIC’s sole and absolute discretion. LuminentOIC warrants
performance of its products to current specifications only in accordance with the company’s standard one-year warranty; however, specifications designated
as “preliminary” are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express,
implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to
the company’s Terms and Conditions of Sale for further warranty information.
LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or
intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and
LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights.
Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury
or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and
indemnify LuminentOIC for any damages resulting from such use or sale.
THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that LuminentOIC is not liable for any actual,
consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current.
© LuminentOIC, Inc. 2005
All rights reserved
LUMINENTOIC.COM
20550 Nordhoff St. • Chatsworth, CA 91311 • tel: 818.773.9044 • fax: 818.576.9486
9F, No 81, Shui Lee Rd. • Hsinchu, Taiwan, R.O.C. • tel: 886.3.5169222 • fax: 886.3.5169213
4
LUMNDS826-AUG0105
rev. A.1
Similar pages