DCDC 10 Watts JHM10 Series xppower.com • International Medical Approvals • 4000 VAC Reinforced Insulation • Meets IEC606011, 3rd Edition • 2 µA Patient Leakage Current • DIP24 Package • EN55011 Level A With No External Components • 3 Year Warranty Specification Input Input Voltage Range Input Current Inrush Current Input Filter Patient Leakage Current Undervoltage Lockout Input Surge General • 5 V (4.5-9 VDC) 12 V (9-18 VDC) 24 V (18-36 VDC) • See table • 20 A max at 36 V • Pi network • 2 µA max • 5 V models, on at >4.4 V, off <4.2 V 12 V models, on at >8.8 V, off <8.3 V 24 V models, on at >17.5 V, off <17.0 V • 5 V models 15 V for 3 s 12 V models 25 V for 3 s 24 V models 50 V for 3 s Output Output Voltage Output Voltage Trim Minimum Load Initial Set Accuracy Start Up Delay Start Up Rise Time Line Regulation Load Regulation • • • • • • • • Cross Regulation • Transient Response • Ripple & Noise Overload Protection Overvoltage Protection Temperature Coefficient Short Circuit Protection • • • • See table ±10% No minimum load required ±1% max on V1, ±2% max on V2 5 ms typical 2 ms typical ±0.3% max ±2% max 0% to 10% load, ±1% max 10% to 100% load ±4% max on dual with one output set to 50% load and the other varied from 10% to 100% load (D05 is 20% to 100%) 4% max deviation, recovery to within 1% in <500 µs for a 50% load change at 0.25 A/µs rate 1% pk-pk max at 20 MHz bandwidth 120% - 200%, trip and restart 115% - 140% ±0.03/°C max • Trip and Restart (hiccup mode), auto recovery Efficiency Isolation Input to Output Capacitance Switching Frequency Power Density MTBF • See tables • 4000 VAC for 1 min. double/reinforced with a working voltage of 250 VAC. Meets 2 x MOPP per 3rd edition of IEC60601-1 5000 VAC for 10 ms in accordance with IEC60664-1 • 20 pF max • 80 kHz to 1.2 MHz variable • 20.0 W/in3 • >1 MHrs typical to MIL-STD-217F at 25 °C, GB Environmental Operating Temperature Case Temperature Storage Temperature Operating Humidity Cooling • • • • • -40 °C to +80 °C, see derating curve +100 °C max -40 °C to +100 °C 5-90%, non-condensing Natural convection EMC & Safety Emissions Immunity ESD Immunity Radiated Immunity EFT/Burst Surge Conducted Immunity Magnetic Field Safety Approvals • EN55011 & EN55022 level A conducted & radiated with no external components • IEC60601-1-2, EN61204-3 • EN61000-4-2, level 2, Perf Criteria A • EN61000-4-3, 10 V/m Perf Criteria A • EN61000-4-4, level 2 Perf Criteria A • EN61000-4-5, level 1 Perf Criteria A • EN61000-4-6, 10 Vm, Perf Criteria A • EN61000-4-8, 3 A/m Perf Criteria A • ANSI/AMMI ES60601-1 3rd Edition CSA-22.2 No.60601-1:2008 IEC60601-1 3rd Edition Input Voltage Output Voltage 4.5-9 V 9-18 V 18-36 V Input Current No Load(1) Full Load(2) Output Current Maximum Capacitive Load Efficiency(3) Model Number 5.0 V 2000 mA 100 mA 2690 mA 2200 µF 83.5% JHM1005S05 12.0 V 833 mA 115 mA 2640 mA 1000 µF 85.0% JHM1005S12 15.0 V 666 mA 115 mA 2640 mA 680 µF 85.0% JHM1005S15 ±5.0 V ±1000 mA 130 mA 2760 mA ±1000 µF 81.5% JHM1005D05 ±12.0 V ±420 mA 115 mA 2695 mA ±470 µF 84.0% JHM1005D12 ±15.0 V ±333 mA 115 mA 2670 mA ±470 µF 84.0% JHM1005D15 5.0 V 2000 mA 50 mA 1310 mA 2200 µF 86.0% JHM1012S05 12.0 V 833 mA 50 mA 1280 mA 1000 µF 88.0% JHM1012S12 15.0 V 666 mA 50 mA 1265 mA 680 µF 89.0% JHM1012S15 ±5.0 V ±1000 mA 50 mA 1345 mA ±1000 µF 84.0% JHM1012D05 ±12.0 V ±420 mA 50 mA 1290 mA ±470 µF 88.0% JHM1012D12 ±15.0 V ±333 mA 50 mA 1280 mA ±470 µF 88.0% JHM1012D15 5.0 V 2000 mA 25 mA 645 mA 2200 µF 87.0% JHM1024S05 12.0 V 833 mA 20 mA 630 mA 1000 µF 89.0% JHM1024S12 15.0 V 666 mA 20 mA 630 mA 680 µF 89.0% JHM1024S15 ±5.0 V ±1000 mA 20 mA 660 mA ±1000 µF 85.0% JHM1024D05 ±12.0 V ±420 mA 25 mA 640 mA ±470 µF 88.0% JHM1024D12 ±15.0 V ±333 mA 25 mA 635 mA ±470 µF 88.0% JHM1024D15 Notes 1. Input current measured at nominal input voltage. 2. Input current measured at lowest input voltage. 3. Typical values. Mechanical Details 1.25 (31.75) 0.10 (2.54) 0.20 (5.08) 14 16 0.80 (20.32) 22 23 0.60 (15.24) Bottom View 11 10 9 3 2 0.90 (22.86) 0.18 (4.57) Dual -Vin -Vin Common Trim -Vout +Vout Common +Vin +Vin Notes Notes: 1. Pin diameter: 0.02 ±0.002 (0.5 ±0.05) 2. Pin pitch tolerance: ±0.014 (±0.35) 3. Case Tolerance: ±0.02 (±0.5) 0.40 (10.40) Pin Connections Single -Vin -Vin No Pin Trim No Pin +Vout -Vout +Vin +Vin Pin 2 3 9 10 11 14 16 22 23 1. 2. 3. 4. 5. 0.12 (3.05) Min. All dimensions are in inches (mm) Weight: 0.04 lbs (20 g) approx. Pin diameter: 0.02 ±0.002 (0.5 ±0.05) Pin pitch tolerance: ±0.01 (±0.25) Case tolerance: ±0.02 (±0.5) Application Notes Derating Curve External Output Trim 10 Trim 1 8 2 Trim Up 3 Load (W) + Vout Trim Down 6 -Vout Trim 4 2 0 -40 -30 -20 -10 0 10 20 30 40 50 Ambient Temperature (°C) 1 JHM1012/24 S05, S12,S15, D12, D15 2 JHM1012/24 D05, JHM1005S05, S12, S15, D12, D15 3 JHM1005D05 60 70 80 90 For 5 V output: Trim +10%, R = 3.4 k typical Trim -10%, R = 1 k typical For ±5 V output: Trim +10%, R = 12.0 k typical Trim -10%, R = 8.0 k typical For 12 V output: Trim +10%, R = 5.9 k typical Trim -10%, R = 11.3 k typical For ±12 V output: Trim +10%, R = 12.8 k typical Trim -10%, R = 9.5 k typical For 15 V output: Trim +10%, R = 8.3 k typical Trim -10%, R = 10 k typical For ±15 V output: Trim +10%, R = 18 k typical Trim -10%, R = 14.8 k typical 13-Jan-14 DCDC JHM10 Models and Ratings