ON MPS2907ARLG General purpose transistor Datasheet

MPS2907A Series
General Purpose
Transistors
PNP Silicon
http://onsemi.com
Features
• These are Pb−Free Devices*
COLLECTOR
3
2
BASE
MAXIMUM RATINGS
Rating
Symbol
Value
Unit
Collector −Emitter Voltage
VCEO
−60
Vdc
Collector −Base Voltage
VCBO
−60
Vdc
Emitter −Base Voltage
VEBO
−5.0
Vdc
Collector Current − Continuous
IC
−600
mAdc
Total Device Dissipation @ TA = 25°C
Derate above 25°C
PD
625
5.0
mW
mW/°C
Total Device Dissipation @ TC = 25°C
Derate above 25°C
PD
1.5
12
W
mW/°C
TJ, Tstg
−55 to +150
°C
Characteristic
Symbol
Max
Unit
Thermal Resistance, Junction−to−Ambient
RqJA
200
°C/W
Thermal Resistance, Junction−to−Case
RqJC
83.3
°C/W
Operating and Storage Junction
Temperature Range
THERMAL CHARACTERISTICS
1
EMITTER
TO−92
CASE 29
STYLE 1
3
STRAIGHT LEAD
BULK PACK
Line 2
MPS2907AG
MPS
2907A
MPS2907ARLG
MPS2
907A
MPS2907ARLRAG
MPS
2907
MPS2907ARLRPG
MPS
2907
3
BENT LEAD
TAPE & REEL
AMMO PACK
MPSx
x907x
YWW G
G
DEVICE MARKING
Line 1
2
MARKING DIAGRAM
Stresses exceeding Maximum Ratings may damage the device. Maximum
Ratings are stress ratings only. Functional operation above the Recommended
Operating Conditions is not implied. Extended exposure to stresses above the
Recommended Operating Conditions may affect device reliability.
Device
1
12
Y
WW
G
= Year
= Work Week
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
*For additional information on our Pb−Free strategy and soldering details, please
download the ON Semiconductor Soldering and Mounting Techniques
Reference Manual, SOLDERRM/D.
© Semiconductor Components Industries, LLC, 2010
June, 2010 − Rev. 5
1
Publication Order Number:
MPS2907A/D
MPS2907A Series
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)
Symbol
Min
Max
Unit
Collector −Emitter Breakdown Voltage (Note 1) (IC = −10 mAdc, IB = 0)
V(BR)CEO
−60
−
Vdc
Collector −Base Breakdown Voltage (IC = −10 mAdc, IE = 0)
V(BR)CBO
−60
−
Vdc
Emitter −Base Breakdown Voltage (IE = −10 mAdc, IC = 0)
V(BR)EBO
−5.0
−
Vdc
Collector Cutoff Current (VCE = −30 Vdc, VEB(off) = −0.5 Vdc)
ICEX
−
−50
nAdc
Collector Cutoff Current
(VCB = −50 Vdc, IE = 0)
(VCB = −50 Vdc, IE = 0, TA = 150°C)
ICBO
−
−
−0.01
−10
−
−50
75
100
100
100
50
−
−
−
300
−
−
−
−0.4
−1.6
−
−
−1.3
−2.6
fT
200
−
MHz
Output Capacitance (VCB = −10 Vdc, IE = 0, f = 1.0 MHz)
Cobo
−
8.0
pF
Input Capacitance (VEB = −2.0 Vdc, IC = 0, f = 1.0 MHz)
Cibo
−
30
pF
ton
−
45
ns
td
−
10
ns
tr
−
40
ns
toff
−
100
ns
ts
−
80
ns
tf
−
30
ns
Characteristic
OFF CHARACTERISTICS
Base Current (VCE = −30 Vdc, VEB(off) = −0.5 Vdc)
IB
mAdc
nAdc
ON CHARACTERISTICS
DC Current Gain
(IC = −0.1 mAdc, VCE = −10 Vdc)
(IC = −1.0 mAdc, VCE = −10 Vdc)
(IC = −10 mAdc, VCE = −10 Vdc)
(IC = −150 mAdc, VCE = −10 Vdc) (Note 1)
(IC = −500 mAdc, VCE = −10 Vdc) (Note 1)
hFE
Collector −Emitter Saturation Voltage (Note 1)
(IC = −150 mAdc, IB = −15 mAdc)
(IC = −500 mAdc, IB = −50 mAdc)
VCE(sat)
Base −Emitter Saturation Voltage (Note 1)
(IC = −150 mAdc, IB = −15 mAdc)
(IC = −500 mAdc, IB = −50 mAdc)
VBE(sat)
−
Vdc
Vdc
SMALL−SIGNAL CHARACTERISTICS
Current −Gain − Bandwidth Product (Notes 1 and 2),
(IC = −50 mAdc, VCE = −20 Vdc, f = 100 MHz)
SWITCHING CHARACTERISTICS
Turn−On Time
Delay Time
(VCC = −30 Vdc, IC = −150 mAdc,
IB1 = −15 mAdc) (Figures 1 and 5)
Rise Time
Turn−Off Time
Storage Time
(VCC = −6.0 Vdc, IC = −150 mAdc,
IB1 = IB2 = 15 mAdc) (Figure 2)
Fall Time
1. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2%.
2. fT is defined as the frequency at which |hfe| extrapolates to unity.
http://onsemi.com
2
MPS2907A Series
INPUT
Zo = 50 W
PRF = 150 PPS
RISE TIME ≤ 2.0 ns
P.W. < 200 ns
INPUT
Zo = 50 W
PRF = 150 PPS
RISE TIME ≤ 2.0 ns
P.W. < 200 ns
-30 V
200
1.0 k
0
TO OSCILLOSCOPE
RISE TIME ≤ 5.0 ns
-6.0 V
1.0 k
1.0 k
0
50
-16 V
+15 V
-30 V
50
37
TO OSCILLOSCOPE
RISE TIME ≤ 5.0 ns
1N916
200 ns
200 ns
Figure 1. Delay and Rise Time Test Circuit
Figure 2. Storage and Fall Time Test Circuit
TYPICAL CHARACTERISTICS
hFE , NORMALIZED CURRENT GAIN
3.0
VCE = -1.0 V
VCE = -10 V
2.0
TJ = 125°C
25°C
1.0
-55°C
0.7
0.5
0.3
0.2
-0.1
-0.2 -0.3
-0.5 -0.7 -1.0
-2.0
-3.0
-5.0 -7.0
-10
-20
-30
-50 -70 -100
-200 -300
-500
IC, COLLECTOR CURRENT (mA)
VCE, COLLECTOR-EMITTER VOLTAGE (VOLTS)
Figure 3. DC Current Gain
-1.0
-0.8
IC = -1.0 mA
-10 mA
-100 mA
-500 mA
-0.6
-0.4
-0.2
0
-0.005
-0.01
-0.02 -0.03 -0.05 -0.07 -0.1
-0.2 -0.3 -0.5 -0.7 -1.0
IB, BASE CURRENT (mA)
-2.0
Figure 4. Collector Saturation Region
http://onsemi.com
3
-3.0
-5.0 -7.0 -10
-20 -30
-50
MPS2907A Series
ORDERING INFORMATION
Package
Shipping†
MPS2907AG
TO−92
(Pb−Free)
5000 Units / Bulk
MPS2907ARLG
TO−92
(Pb−Free)
MPS2907ARLRAG
TO−92
(Pb−Free)
MPS2907ARLRPG
TO−92
(Pb−Free)
Device
2000 / Tape & Reel
2000 / Ammo Pack
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
t, TIME (ns)
300
200
VCC = -30 V
IC/IB = 10
TJ = 25°C
tr
100
70
50
30
20
td @ VBE(off) = 0 V
10
7.0
5.0
2.0 V
3.0
-5.0 -7.0 -10
-20 -30
-50 -70 -100
IC, COLLECTOR CURRENT
-200 -300 -500
Figure 5. Turn−On Time
500
300
VCC = -30 V
IC/IB = 10
IB1 = IB2
TJ = 25°C
200
t, TIME (ns)
tf
100
70
50
30
t′s = ts - 1/8 tf
20
10
7.0
5.0
-5.0 -7.0 -10
-20 -30
-50 -70 -100
-200 -300 -500
IC, COLLECTOR CURRENT (mA)
Figure 6. Turn−Off Time
http://onsemi.com
4
MPS2907A Series
TYPICAL SMALL−SIGNAL CHARACTERISTICS
NOISE FIGURE
VCE = 10 Vdc, TA = 25°C
10
10
8.0
8.0
NF, NOISE FIGURE (dB)
NF, NOISE FIGURE (dB)
f = 1.0 kHz
IC = -1.0 mA, Rs = 430 W
-500 mA, Rs = 560 W
-50 mA, Rs = 2.7 kW
-100 mA, Rs = 1.6 kW
6.0
4.0
Rs = OPTIMUM SOURCE RESISTANCE
2.0
0
0.01 0.02 0.05 0.1 0.2
0.5 1.0 2.0
5.0 10
20
50
6.0
IC = -50 mA
-100 mA
-500 mA
-1.0 mA
4.0
2.0
0
100
50
100
200
f, FREQUENCY (kHz)
30
C, CAPACITANCE (pF)
Ceb
10
7.0
Ccb
5.0
3.0
2.0
-0.1
-0.2 -0.3 -0.5
-1.0
-2.0 -3.0 -5.0
-10
-20 -30
20 k
50 k
400
300
200
100
80
VCE = -20 V
TJ = 25°C
60
40
30
20
-1.0 -2.0
-5.0
-10
-20
-50
-100 -200
-500 -1000
REVERSE VOLTAGE (VOLTS)
IC, COLLECTOR CURRENT (mA)
Figure 9. Capacitances
Figure 10. Current−Gain — Bandwidth Product
+0.5
-1.0
TJ = 25°C
-0.6
0
VBE(sat) @ IC/IB = 10
COEFFICIENT (mV/ ° C)
-0.8
V, VOLTAGE (VOLTS)
5.0 k 10 k
Figure 8. Source Resistance Effects
f T, CURRENT-GAIN — BANDWIDTH PRODUCT (MHz)
Figure 7. Frequency Effects
20
500 1.0 k 2.0 k
Rs, SOURCE RESISTANCE (OHMS)
VBE(on) @ VCE = -10 V
-0.4
-0.2
RqVC for VCE(sat)
-0.5
-1.0
-1.5
RqVB for VBE
-2.0
VCE(sat) @ IC/IB = 10
0
-0.1 -0.2
-0.5 -1.0 -2.0 -5.0 -10 -20
-50 -100 -200
-2.5
-0.1 -0.2 -0.5 -1.0 -2.0
-500
-5.0 -10 -20
-50 -100 -200 -500
IC, COLLECTOR CURRENT (mA)
IC, COLLECTOR CURRENT (mA)
Figure 11. “On” Voltage
Figure 12. Temperature Coefficients
http://onsemi.com
5
MPS2907A Series
PACKAGE DIMENSIONS
TO−92 (TO−226)
CASE 29−11
ISSUE AM
A
B
STRAIGHT LEAD
BULK PACK
R
P
L
SEATING
PLANE
K
D
X X
G
J
H
V
C
SECTION X−X
N
1
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. CONTOUR OF PACKAGE BEYOND DIMENSION R
IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P AND
BEYOND DIMENSION K MINIMUM.
DIM
A
B
C
D
G
H
J
K
L
N
P
R
V
INCHES
MIN
MAX
0.175
0.205
0.170
0.210
0.125
0.165
0.016
0.021
0.045
0.055
0.095
0.105
0.015
0.020
0.500
--0.250
--0.080
0.105
--0.100
0.115
--0.135
---
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.407
0.533
1.15
1.39
2.42
2.66
0.39
0.50
12.70
--6.35
--2.04
2.66
--2.54
2.93
--3.43
---
N
A
R
BENT LEAD
TAPE & REEL
AMMO PACK
B
P
T
SEATING
PLANE
G
K
D
X X
J
V
1
C
N
SECTION X−X
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. CONTOUR OF PACKAGE BEYOND
DIMENSION R IS UNCONTROLLED.
4. LEAD DIMENSION IS UNCONTROLLED IN P
AND BEYOND DIMENSION K MINIMUM.
DIM
A
B
C
D
G
J
K
N
P
R
V
MILLIMETERS
MIN
MAX
4.45
5.20
4.32
5.33
3.18
4.19
0.40
0.54
2.40
2.80
0.39
0.50
12.70
--2.04
2.66
1.50
4.00
2.93
--3.43
--STYLE 1:
PIN 1. EMITTER
2. BASE
3. COLLECTOR
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should
Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
6
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
MPS2907A/D
Similar pages