IL66B Vishay Semiconductors Optocoupler, Photodarlington Output, with Internal RBE FEATURES • Internal RBE for high stability • Isolation test voltage, 5300 VRMS A 1 6 NC • No base connection C 2 5 C • High isolation resistance NC 3 4 E • Standard plastic DIP package • Lead (Pb)-free component • Component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC i179019 AGENCY APPROVALS DESCRIPTION The IL66B is an optically coupled isolator employing a gallium arsenide infrared emitter and a silicon photodarlington detector. Switching can be accomplished while maintaining a high degree of isolation between driving and load circuits. They can be used to replace reed and mercury relays with advantages of long life, high speed switching and elimination of magnetic fields. • UL1577, file no. E52744 system code H or J, double protection • BSI IEC 60950 IEC 60065 • CSA 93751 • DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 pending available with option 1 • FIMKO ORDER INFORMATION PART REMARKS IL66B-1 CTR > 200 %, DIP-6 IL66B-2 CTR > 750 %, DIP-6 IL66B-1X006 CTR > 200 %, DIP-6 400 mil (option 6) IL66B-2X006 CTR > 750 %, DIP-6 400 mil (option 6) IL66B-2X009 CTR > 750 %, SMD-6 (option 9) Note For additional information on the available options refer to option information. ABSOLUTE MAXIMUM RATINGS PARAMETER (1) TEST CONDITION SYMBOL VALUE UNIT VR IF Pdiss 6.0 60 100 1.33 V mA mW mW/°C BVCEO BVECO Pdiss 60 5.0 200 2.6 V V mW mW/°C INPUT Peak reverse voltage Forward continuous current Power dissipation Derate linearly from 55 °C OUTPUT Collector emitter breakdown voltage Emitter collector breakdown voltage Power dissipation Derate linearly from 25 °C Document Number: 83639 Rev. 1.5, 09-Nov-05 For technical questions, contact: [email protected] www.vishay.com 1 IL66B Optocoupler, Photodarlington Output, with Internal RBE Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (1) PARAMETER TEST CONDITION SYMBOL VALUE UNIT COUPLER t = 1.0 s VISO 5300 VRMS VIO = 500 V, Tamb = 25 °C RIO ≥ 1012 Ω VIO = 500 V, Tamb = 100 °C RIO ≥ 1011 Ω Ptot 250 3.3 7 mW mW/°C min mm 7 min mm Storage temperature Tstg - 55 to + 150 °C Operating temperature Tamb - 55 to + 100 °C Tsld 260 °C Isolation test voltage Isolation resistance Total dissipation Derate linearly Creepage path from 25 °C Clearance path Solder Temperature (2) 10 s Notes (1) T amb = 25 °C, unless otherwise specified Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (2) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT Forward voltage IF = 10 mA VF 1.25 1.5 V Reverse current VR = 3.0 V IR 0.01 100 µA VR = 0 CO 25 INPUT Capacitance pF OUTPUT IC = 100 µA BVCEO VCE = 50 V, IF = 0 A ICEO IC = 10 mA VCEsat Collector emitter breakdown voltage Collector emitter leakage current 60 V 1.0 100 nA 1.0 V COUPLER Saturation voltage Note Tamb = 25 °C, unless otherwise specified Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO PARAMETER Current transfer ratio TEST CONDITION IF = 2.0 mA, VCE = 5.0 V PART SYMBOL MIN. IL66B-1 CTR 200 IL66B-2 CTR 750 TYP. MAX. UNIT % 1000 % SWITCHING CHARACTERISTICS PARAMETER Turn-On, Turn-Off time www.vishay.com 2 TEST CONDITION SYMBOL VCC = 10 V, IF = 2 mA, RL = 100 Ω ton, toff MIN. TYP. For technical questions, contact: [email protected] MAX. UNIT 200 µs Document Number: 83639 Rev. 1.5, 09-Nov-05 IL66B Optocoupler, Photodarlington Output, with Internal RBE Vishay Semiconductors TYPICAL CHARACTERISTICS 10000 1.3 1000 Ice - Collector Emitter Current (mA) 1.4 TA = - 55 °C 1.2 TA = 25 °C 1.1 1.0 0.9 TA = 100 °C 0.7 0.1 1 10 100 IF - Forward Current (mA) iil66_01 0.1 0.001 0.1 1 10 100 IF - LED Current (mA) Fig. 6 - Non-Saturated and Saturated Collector Emitter Current vs. LED Current 50 2.0 VCE = 5 V Normalized to: VCE = 5 V IF = 2 mA 1.5 1.0 0.5 VCE = 1 V tpHL - High/Low Propagation Delay - µs NCTRce - Normalized (CTRce) 1 iil66b_04 Fig. 3 - Forward Voltage vs. Forward Current 0.0 40 VCC = 5 V Vth = 1.5 V 10 KΩ 30 20 220 Ω 10 0 0.1 1 100 10 IF - LED Current (mA) iil66b_02 0 5 10 15 20 IF - LED Current (mA) iil66b_05 Fig. 4 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current NCTRce - Normalized (CTRce) VCE = 0.4 V 10 0.01 0.8 Fig. 7 - High to low Propagation Delay vs. Collector Load Resistance and LED Current 150 1.2 Normalized to: VCE = 5 V IF = 10 mA 1.0 VCE = 5 V 0.8 0.6 0.4 0.2 VCE = 0.4 V 0.0 10 KΩ 125 100 2 KΩ 75 VCC = 5 V Vth = 1.5 V 50 25 220 KΩ 0 1 0.1 iil66b_03 VCE = 5 V 100 tpLH - Low/High Propagation Delay - µs VF - Forward Voltage (V) Tamb = 25 °C, unless otherwise specified 10 100 1000 IF - LED Current (mA) Fig. 5 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current Document Number: 83639 Rev. 1.5, 09-Nov-05 0 iil66b_06 5 10 15 20 IF - LED Current (mA) Fig. 8 - Low to High Propagation Delay vs. Collector Load Resistance and LED Current For technical questions, contact: [email protected] www.vishay.com 3 IL66B Optocoupler, Photodarlington Output, with Internal RBE Vishay Semiconductors PACKAGE DIMENSIONS in inches (millimeters) 3 2 1 4 5 6 Pin one ID 0.248 (6.30) 0.256 (6.50) ISO method A 0.335 (8.50) 0.343 (8.70) 0.048 0.039 (1.00) min. 0.300 (7.62) (0.45) typ. 0.022 (0.55) 0.130 (3.30) 0.150 (3.81) 18 ° 4° typ. 0.114 (2.90) 0.031 (0.80) min. 0.031 (0.80) 0.018 (0.45) 0.130 (3.0) 3°to 9° 0.035 (0.90) 0.022 (0.55) 0.100 (2.54) typ. 0.010 (0.25) typ. 0.300 to 0.347 (7.62 to 8.81) i178004 Option 6 Option 9 0.375 (9.53) 0.395 (10.03 ) 0.407 (10.36) 0.391 (9.96) 0.307(7.8) 0.291(7.4) 0.300 (7.62 ) ref. 0.0040 (0.102) 0.0098 (0.249) 18493 www.vishay.com 4 0.014(0.35) 0.010 (0.25) 0.400(10.16) 0.430 (10.92) 0.012 (0.30) typ. 0.020 (0.51) 0.040 (1.02) 0.315 (8.00) min. For technical questions, contact: [email protected] 15° max. Document Number: 83639 Rev. 1.5, 09-Nov-05 IL66B Optocoupler, Photodarlington Output, with Internal RBE Vishay Semiconductors OZONE DEPLETING SUBSTANCES POLICY STATEMENT It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. 2. Regularly and continuously improve the performance of our products, processes, distribution and operating systems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively. 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Document Number: 83639 Rev. 1.5, 09-Nov-05 For technical questions, contact: [email protected] www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1