SunLED AUG14C2-A 13.8mm (0.54) 14 segment dual digit alphanumeric display Datasheet

Part Number:
AUG14C2-A
13.8mm (0.54”) 14 SEGMENT DUAL DIGIT
ALPHANUMERIC DISPLAY
www.SunLED.com
Features
● 0.54 INCH CHARACTER HEIGHT.
●LOW CURRENT OPERATION.
●HIGH CONTRAST AND LIGHT OUTPUT.
● EASY MOUNTING ON P.C. BOARDS OR SOCKETS.
● CATEGORIZED FOR LUMINOUS INTENSITY.
● MECHANICALLY RUGGED.
● STANDARD: GRAY FACE, WHITE SEGMENT.
● RoHS COMPLIANT.
Operating Characteristics
(TA=25°C)
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ± 0.25(0.01") unless otherwise noted.
3. Specifications are subject to change without notice.
Absolute Maximum Ratings
(TA=25°C)
UG
(GaP)
Unit
UG
(GaP)
Unit
Forward Voltage (Typ.)
Per Segment or (DP)
(IF=10mA)
VF
2.0
V
Forward Voltage (Max.)
Per Segment or (DP)
(IF=10mA)
VF
2.5
V
IR
10
uA
Reverse Voltage
Per Segment or (DP)
VR
5
V
Forward Current
Per Segment or (DP)
IF
25
mA
Reverse Current (Max.)
Per Segment or (DP)
(VR=5V)
λP
565
nm
mA
Wavelength of Peak
Emission (Typ.)
(IF=10mA)
λD
568
nm
mW
Wavelength of Dominant
Emission (Typ.)
(IF=10mA)
Spectral Line Full Width
At Half-Maximum (Typ.)
(IF=10mA)
Δλ
30
nm
Capacitance (Typ.)
(VF=0V, f=1MHz)
C
15
pF
Forward Current (Peak)
Per Segment or (DP)
1/10 Duty Cycle
0.1ms Pulse Width
iFS
Power Dissipation
Per Segment or (DP)
PT
62.5
Operating Temperature
TA
-40 ~ +85
Tstg
-40 ~ +85
Storage Temperature
Lead Solder Temperature
[2mm Below Package Base]
Part
Number
AUG14C2-A
Emitting
Color
Green
Published Date : MAR 13,2008
140
°C
260°C For 3~5 Seconds
Emitting
Material
GaP
Luminous
Intensity
(IF=10mA)
ucd
min.
typ.
1900
7990
Drawing No : SDSA2376
V3
Wavelength
nm
λP
Description
565
Common Cathode. Rt. Hand Decimal
Checked : Shin Chi
P.1/4
Part Number:
AUG14C2-A
13.8mm (0.54”) 14 SEGMENT DUAL DIGIT
ALPHANUMERIC DISPLAY
www.SunLED.com
™ UG
Published Date : MAR 13,2008
Drawing No : SDSA2376
V3
Checked : Shin Chi
P.2/4
Part Number:
AUG14C2-A
13.8mm (0.54”) 14 SEGMENT DUAL DIGIT
ALPHANUMERIC DISPLAY
www.SunLED.com
AUG14C2-A
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : MAR 13,2008
Drawing No : SDSA2376
V3
Checked : Shin Chi
P.3/4
Part Number:
13.8mm (0.54”) 14 SEGMENT DUAL DIGIT
ALPHANUMERIC DISPLAY
www.SunLED.com
PACKING & LABEL SPECIFICATIONS
Published Date : MAR 13,2008
AUG14C2-A
Drawing No : SDSA2376
AUG14C2-A
V3
Checked : Shin Chi
P.4/4
Similar pages