BS42 200N-D--F Orrder Code:B BS4200N-D-F Version: A0 2014-02--28 Thyyristor Surgge Suppresseer Ex xterior Feaatures Excellent capaability of abso orbing transieent surge Q Quick response to surge volltage Eliminates oveervoltage cau used by fast rissing transientts M Moisture sensiitivity level: leevel 1 W Weight:87mg N degenerattive Non SMB-F Appplication innformation Package P (topp view) E Ethernet ` B4 42ND D 1309 1 Aggency Apprrovals 2 Schematic Syymbol Icon Description n C Compliance with h 2011/65/EU C Compliance with hIEC61249-2-21:2003 1 2 Partt Number annd Electricaal Parameterr V S ① @ IS IDRM@VDRRM Part Number N μA V M MAX BS4200 0N-D-F 5 V mA A MA AX 4 400 52 20 V T @ IT V A MAX 800 0 4 2.2 IH CO② mA pF MAX MAX 50 35 Ab bsolute maxim mum ratings measured at TA= 25ºC RH R = 45%-75% (unless oth herwise noted d). ① Vs is measured at 100KV V/S ② Off-state cap pacitance is measured m in VDC=2V, VRM Hz MS=1V,f=1MH 1/5 www.benncent.com.cn S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications BS42 200N-D--F Orrder Code:B BS4200N-D-F Version: A0 2014-02--28 Thyyristor Surgge Suppresseer Parrt Numberinng System BS 4200 0 (1) (2) Mark M N D ( 3) B42 2ND B006 6U2G G B4 42LC 13 309 09 909 09 909 F (4) (5) (1))Bencent Sem miconductor Surge S Arresteer (2))Off-state Volltage,e.g.：42 200=420×10 00=420V (3)) Package : SM MB B42ND: Paart Number (4)) Rating Surgge Voltage:8K KV (10/700μs) s (5))Flat 1309:Septeember,2013 Feet V-II Curve P Parameters Definition n VDRM Peaak Off-stateV Voltage IDRM O Off-stateCurr rent VS S Switching Volltage IS S Switching Currrent IH H Holding Currrent VT O On-state Volttage IT O On-state Currrent CO Off ff-state Capaccitance +I IT IS IH IDRM -V +V VT VDRM VS -I Surgge Ratings Cu urrent Wavefform 8/20μs 5/320μs* 10/1000μs Vo oltage Wavefform 1 1.2/50 μs 10/700 0μs* 10/1000μs Ipp 400A 200A A 140A -Peaak pulse curreent rating (IPP) is repetitive and guaranteeed for the liffe of the prod duct; -Ben ncent only maakes the test for f 5/320μs@ @150A* (10/ /700μs@8KV V), but for oth her IPP valuee derived from m experience is just for reference r only y. Bencent wiill not take an ny obligation for these parrameters, so before b applyin ngour parts, please p make sure s to veriffy theparametters listed in the t above tab ble. Therrmal Considderations Sym mbol TJ TS 2/5 Parameter Opeerating Junctiion Tem mperature Ran nge Storaage Temperatture Range www.benncent.com.cn Prroduct Charracteristics Vaalue Un nit Lead Materrial -40 to o +150 ℃ Body Materrial -60 to o +150 ℃ Terminal Fin nish Copper Alloy L recognized epoxy e meetin ng UL flam mmability classification 94V V-0 100% Matte--Tin Plated S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications BS42 200N-D--F Orrder Code:B BS4200N-D-F Thyyristor Surgge Suppresseer Typpical Characcteristics 3/5 www.benncent.com.cn Version: A0 2014-02--28 S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications BS42 200N-D--F Orrder Code:B BS4200N-D-F Version: A0 2014-02--28 Thyyristor Surgge Suppresseer Ennvironmentaal Characterristics T Testing itemss Techn nical standard ds Temperaature: 150±3℃ ℃, Bias=80% %VDRM Time:16 68H Temperaature: 150℃ Time:16 68H Temperaature:From -4 40℃ to125℃ Dwell tiime: 30min, 10-100 1 cycles Temperaature: 85℃Hu umidity:85% Test tim me:168H Temperaature: 121℃, 2atm. Humidity:100% Test tim me: 24H to 168 8H Temperaature: 260±5℃ ℃ Time off dip solderingg: 10s, 3timess Hiigh Temperatture Reverse Bias B Test Hiigh Temperatture Life Testt Hiigh-low Temp perature Cyclle Test Hiigh Temperatture &High Humidity H Testt Prressure Cookeer Test Reesistance of Soldering S Heaat Noote: The abovve testing item ms can be speecified by cusstomer’s speccial request Prooduct Dimeensions REF mm inch A 5.4±0.3 3 0.213±0.012 0 B 4.4±0.2 2 0.173±0.008 0 C 2.0±0.1 1 0.079±0.004 0 D 3.3±0.3 3 0.130±0.012 0 E 0.8±0.3 3 0.032±0.012 0 F 0.25±0.0 05 0.010±0.002 0 G 2±0.3 0.079±0.012 0 REF mm inch A 6.4 0.252 B 3.4 0.134 C 2.75 0.108 A B C E Bottom vieew F G D Side view Reecommended Solderingg Pad A B C 4/5 www.benncent.com.cn S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications BS42 200N-D--F Orrder Code:B BS4200N-D-F Version: A0 2014-02--28 Thyyristor Surgge Suppresseer Refflow Profilee Reflow Condition perature Min. Temp +150 0°C Temp perature Max. +200 0°C Timee(Min to Max) 60 – 180 secs. Aveerage ramp up rate(Liquidus Tem mp(TL) to peak k) TS(m max) to TL - Ra amp-up Rate 3°C/ /sec. Max. (L Liquidus) - Temperature T (T TL) Peaak Temp (TP) 7°C +217 60 – 150 secs. (TP) TS TL 6°C/ /sec. Max. Tim me 25°C to peaak Temp (TP) 8 min n. Max. Do not exceed +260 0°C 5/5 Ramp-dow wn Preheat TS(min) 8 – 15 secs. Ram mp-down Ratee Pacckage Reeel TL TS(max) +(26 60+0/-5 )°C Tim me within 5°C of actual Peak k Temp Critical Zone TL to TP Ram mp-up TL 3°C/ /sec. Max. - Temperature T (T TL) Refflow TP TP Temperature Pre Heat Pb-F Free Assembly y 25 2 Time tim me to peak temperatu ure Informaation REF mm inch A 3 3.65+/-0.3 0.144+/-0 0.012 B 5 5.69+/-0.3 0.244+/0--.012 d 1.5+/-0.1 0.059+/-0 0.004 D 330.0 13.0 D1 100+/-3 3.937+/-0 0.118 D2 13+/-0.3 0.512+/-0 0.012 E 1.5+/-0.2 0.059+/-0 0.008 F 5 5.65+/-0.2 0.222+/-0 0.008 P 8.0+/-0.2 0.315+/-0 0.008 P0 4.0+/-0.2 0.157+/-0 0.008 P1 2.0+/-0.2 0.079+/-0 0.008 W 1 12.0+/-0.2 0.472+/-0 0.008 W1 1 16.8+/-2.0 0.661+/-0 0.079 OUTLINE REEL R (P PCS) PER CART TON (PCS) REEL DIAMETERS D S (mm) L W H TAPING 3 3,000 24,000 0 330 360 0 360 0 380 0 www.benncent.com.cn CARTON SIZE(mm) S S Specifications aare subject to ch hange without notice. n Customers should verify actuaal device perforrmance in their specific applications