EXPANDED “A SERIES” TOGGLE SWITCHES ISO 9001 Registered Phone: 888-768-2797 or 919-833-0707 Fax: 800-909-9171 or 919-833-8016 Web site: http://www.electro-nc.com E-mail: [email protected] Electroswitch Offers New Toggle Combinations to Cross Competition. Electroswitch is pleased to present this new expanded toggle brochure created to provide many additional crosses against competition: C&K 7000 and E Series Alco A and MTA Series NKK M2T and M Series Apem ST and 5000 Series E-Switch 100 and 100A Series All the new toggle switch combinations are produced at our plant in Raleigh, NC and you get the value of over 55 years of Electroswitch quality. In the coming months we plan to further expand our miniature switch line to include competitive crosses for rockers and washables. For information on all of our miniature and rotary switches, please check our web site at www.electro-nc.com 1 A Series Toggle Switch Series 1 Pole 2 Pole 3 Pole 4 Pole No. Poles + 1 2 3 4 Code OFF NONE NONE OFF OFF ON ON ON ON ON Keyway Circuits + ON ON ON* ON* ON* ON ON* ON* ON* ON 21 23 26 27 31 32 33 34 35 53 Code Circuit Pos. “C” * Momentary Contact ON ON ON ON* ON ON ON NONE ON* NONE Poles T1 T T2 K1 K2 K9 K12 K19 Large Bats 15/32” Bushing .468 Large .687 Large .610 Flatted Lever Locking Actuators Std. taper threaded Dome threaded Dome unthreaded Taper threaded Taper unthreaded L0 L1 L2 Longer Bats .840 Bat .640 Bat .550 Bat L3 L4 P1 P3 P4 Flatted Bats .840 Flat .450 (Std.) .250 Flat Plastic Bats .840 Plastic .571 Plastic S M Code Lever Options .410 Bat (Std.) .200 Bat (Std.) Type Lever Options + Toggle Switch Selection Guide L3 and L4 Colors Black Nylon Red Nylon White Nylon Bright Chrome Satin Chrome Black Finish Finishes + 4 5 6 1 2 3 Code Lever Finish Bushing Options T TW TX K For Locking Lever Only Y Y1 Y4 Y5 Y91 Y9 D D91 D9 D8 H H3 H31 H4 CW Code + 15/32” Bushing Options for Large Bats 15/32 Dia. (Std.) Splashproof Lever & Panel Seal 15/32 Splashproof Lever Seal Only .350 Threaded (Std.) .370 Threaded High Torque .370 Threaded High Torque w/ Flat .437 Threaded .350 Smooth with Keyway .350 Smooth .280 Threaded (Std.) .280 Smooth with keyway .280 Smooth .280 Smooth with Flat .350 Flatted with Shoulder (Std.) .350 Keyway with Shoulder .315 Threaded High Torque 8mm Threaded High Torque Splashproof lever & Bushing Seal Splashproof lever Seal Only CX Type + Bushing Options Solder Lugs (Std.) Quick Connect Right Angle PC (Std.) Right Angle PC / Snap-in Right Angle PC .156 Right Angle PC .200 Vertical PC .100 Spacing Vertical PC .150 Spacing (Std.) Vertical PC .150 Snap-in Right Angle extended PC Right Angle extended PC Right Angle extended PC Right Angle extended PC Printed Circuit Terminals (Std.) Right Angle Same Throw Right Angle Opposite Throw .555 PC Support Bracket .555 PC Snap-In Bracket HD .460 PC Support Bracket (Std.) .460 PC Snap-In Bracket .630 PC Support Bracket .630 PC Snap-In Bracket .460 PC Support Bracket .460 PC Snap-In Bracket HD .630 PC Support Bracket .630 PC Snap-In Bracket HD .953 PC Support Bracket .953 PC Snap-In Bracket HD 1.150 PC Support Bracket 1.150 PC Snap-In Bracket .750 Wire Wrap .964 Wire Wrap .425 Wire Wrap 1.062 Wire Wrap Type Terminal/Mounting Options Terminal Type Z Z3 A A3 A2 A7 AV AV2 AV3 AW AW1 AW3 AW4 C R R2 V20 V21 V30 V31 V40 V41 V60 V61 V70 V71 V80 V81 V90 V91 W W1 W3 W4 Code K,L,M not available with Z&Z3 K L M Optional Platings Same as B, G, Q, respectively Terminals tin-lead alloy Terminals tin-lead alloy Terminals tin-lead alloy Code B G Q Contact Material Gold/Nickel/Brass Gold/Nickel/Silver Coin Silver Type + Contact Material Other Options Other Anti-Rotation Epoxy Sealed Terminals Type + P Std. Code Following the table from left to right, the designer is able to specify the options wanted. The options are described and illustrated. To determine a part number select the options desired and fill in the boxes in the selection guides illustrated below. Ordering Table – Standard Toggle Switches MINIATURE SWITCHES MINIATURE SWITCHES SPECIFICATOINS: STANDARD MATERIALS: Contact Ratings - Base (body) - Diallyl Phthalate (DAP). Lever (toggle) - Brass, chrome plated. Flat Lever - Brass, satin chrome finish. Locking Lever Cap - Anodized aluminum. Bushing - Brass, nickel plated. Clamp (frame) - Stainless steel. Support Brackets - Steel, tin plated. Switching Contacts and Rockers Letter Code B,K - gold/nickel/brass Letter Code G,L - gold/nickel/silver Letter Code Q,M - Coin silver Center Terminal Letter codes G,L and Q,M - 6 amp at 125 VAC, 3 amp @ 250 VAC (U.L. recognized, CSA certified) or 6 amp at 28 VDC resistive. Letter codes B,K and G,L – 0.5 volt-amp (VA) maximum @ 28 V maximum (AC or DC). Life Under Load - 60,000 make-and-break cycles — resistive load only. Initial Contact Resistance -10 milliohms maximum initial at 3 VDC, 100 ma for both silver and gold plated contacts. Insulation Resistance - 1,000 megohms, min. Dielectric Strength - 1,000 volts RMS minimum at sea level. Weight (including hardware) - SP 0.19 oz.; DP 0.23 oz.; 3-pole 0.28 oz.; 4-pole 0.32 oz. Letter Codes B,K, G,L - Gold flash/nickel/brass Letter Code Q,M - Silver plated brass. Epoxy sealed terminals are supplied as standard STANDARD DIMENSIONS & PART NUMBERS ONE POLE TWO POLE Keyway Keyway Code ON ON ON ON* OFF NONE NONE OFF POS. "C" ON ON ON* ON* 21 23 26 27 Part Number A121S1YZQ A123S1YZQ A126S1YZQ A127S1YZQ Code ON ON ON ON* OFF NONE NONE OFF POS. "C" ON ON ON* ON* THREE POLE 2 POS. "C" ON ON ON* ON* A221S1YZQ A223S1YZQ A226S1YZQ A227S1YZQ Keyway Code OFF NONE NONE OFF 21 23 26 27 FOUR POLE Keyway ON ON ON ON* Part Number 21 23 26 27 Part Number A321S1YZQ A323S1YZQ A326S1YZQ A327S1YZQ Code ON ON ON ON* OFF NONE NONE OFF POS. "C" ON ON ON* ON* 21 23 26 27 Part Number A421S1YZQ A423S1YZQ A426S1YZQ A427S1YZQ TOGGLE LEVER OPTIONS S Std. Bat (.410”) M Short (.200”) T Large Toggle T1 Large Toggle T2 P1 Flatted (.840”) P3 Flatted (.448”) P4 Not available with lever seal L0 Long (.840”) L1 Lever shown with dimensions for .352 long bushings L4 Plastic (.571”) Lever shown with dimensions for .352 long bushings Not available with lever seal L2 Long (.640”) Lever shown with dimensions for .352 long bushings K1 Long (.550”) Not available with lever seal L3 Lever shown with dimensions for .352 long bushings Locking Lever Lever cap supplied with anodized finish only. No lever seals. Flatted (.250”) Plastic (.840”) Lever shown with dimensions for .352 long bushings K12 Threaded K2 Threaded K19 Unthreaded K9 Unthreaded Lever cap supplied with anodized finish only. No lever seals. Lever cap supplied with anodized finish only. No lever seals. LEVER LOCK BUSHING STYLES STYLE 1 STYLE 2 STYLE 3 STYLE 4 STYLE 5 ON-OFF-ON ON-NONE-ON ON-NONE-ON* ON*-OFF-ON* ON-OFF-ON* Locked In Three Positions Locked Out Of Center Positions Locked Into Side Opposite Keyway – Momentary Keyway Side Locked In Center Position – Momentary Either Side Locked In Center Position – Momentary Keyway Side 3 BUSHING OPTIONS CX Threaded with Lever Seal Y Threaded Y9 Smooth (No Keyway) Y91 Smooth w / Keyway D D9 D91 D8 Threaded H High Torque Flatted with Shoulder Smooth (No Keyway) Smooth w / Keyway Smooth w / Flat Add 0.070 to actuator length when using a .280 long bushing. H4 8mm Threaded High Torque H3 High Torque H31 Will withstand 12 in-lbs of torque with no distortion. Y1 (.370”) Threaded High Torque Y4 (.370”) Flat Threaded High Torque CW Splashproof Sealed Lever and Panel Seal (.315”) Threaded High Torque Will withstand 12 in-lbs of torque with no distortion. Y5 Long Bushing (.437”) TW Splashproof Sealed Lever and Panel Seal T&TX P Bushing for T, T1 and T2 Bats Anti-Rotation Anti rotation for 15/32” bushing not done w/pin. 4 TERMINATION SWITCHES C W Printed Circuit Wire-Wrap W1 W3 Wire-Wrap Wire-Wrap W4 Z Wire-Wrap Standard Z3 Quick Connect Not available in K,L, and M contact materials. TERMINATION / MOUNTING SWITCHES A A3 Right Angle PC Std. Right Angle Snap in ONE POLE A A3 Right Angle PC Std. Right Angle Snap in TWO POLE A A3 Snap in Terminal bend radii manufacturing option. Right Angle PC Std. Right Angle Snap in Snap in THREE POLE Terminal bend radii manufacturing option. EXTENDED TERMINAL OPTIONS AW Snap in Terminal bend radii manufacturing option. AW1 AW3 AW4 Right Angle, Extended PC Thru-Hole AW (Right Angle PC Terminals) AW1 AW4 Right Angle, Extended PC Thru-Hole OPTION CODE DIM ”A” AW AW1 AW3 AW4 ONE POLE AW4 Right Angle, Extended PC Thru-Hole OPTION CODE DIM ”A” .50 .72 .20 .83 AW AW1 AW4 TWO POLE .19 .40 .50 .33 THREE POLE 5 TERMINATION / MOUNTING OPTIONS A2 Right Angle PC .156” Spacing Not available w/ CW, H, H3, T, TX, TW, T1, K2, K9, K19, H4, Y1, & Y4. Large bushing and shoulders interfere with printed circuit board. A4 Right Angle PC .156” Spacing Not available w/ CW, H, H3, T, TX, TW, T1, K2, K9, K19, H4, Y1, & Y4. Large bushing and shoulders interfere with printed circuit board. A7 Right Angle PC .200” Spacing R Right Angle Same Throw Not available w/ CW, H, H3, T, TX, TW, T1, K2, K9, K19, H4, Y1, & Y4. Large bushing and shoulders interfere with printed circuit board. Contacts Make on Same Side Toggle Thrown ONE POLE R2 Not available w/ CW, H, H3, T, TX, TW, T1, K2, K9, K19, H4, Y1, & Y4. Large bushing and shoulders interfere with printed circuit board. Not UL or CSA recognized. Right Angle Opposite Throw Contacts Make on Opposite Side Toggle Thrown ONE POLE 6 Not available w/ CW, H, H3, T, TX, TW, T1, K2, K9, K19, H4, Y1, & Y4. Large bushing and shoulders interfere with printed circuit board. TERMINATION / MOUNTING OPTIONS AV AV2 AV3 w/.100” Terminal Spacing w/.150” Terminal Spacing (pictured below) w/.150” Terminal Spacing Snap in Bracket Snap in ONE POLE AV AV2 AV3 Terminal bend radii manufacturing option. w/.100” Terminal Spacing w/.150” Terminal Spacing (pictured below) w/.150” Terminal Spacing Snap in Bracket Snap in TWO POLE AV AV2 AV3 Terminal bend radii manufacturing option. w/.100” Terminal Spacing w/.150” Terminal Spacing (pictured below) w/.150” Terminal Spacing Snap in Bracket Snap in THREE POLE AV AV2 AV3 Terminal bend radii manufacturing option. w/.100” Terminal Spacing w/.150” Terminal Spacing (pictured below) w/.150” Terminal Spacing Snap in Bracket Snap in FOUR POLE Terminal bend radii manufacturing option. 7 TERMINATION MOUNTING OPTIONS V20 V21 .555” high bracket HD Snap In HD ONE POLE Snap in TWO POLE V30 V31 .460” high bracket Snap In ONE POLE Snap in TWO POLE V40 V41 .630” high bracket Snap In ONE POLE Snap in TWO POLE V60 V61 .460” high bracket HD Snap In HD ONE POLE Snap in TWO POLE 8 TERMINATION / MOUNTING OPTIONS V70 V71 .630” high bracket HD Snap In HD ONE POLE Snap in TWO POLE V80 V81 .953” high bracket HD Snap In HD ONE POLE Snap in TWO POLE V90 V91 1.150” high bracket Snap In .620 ONE POLE Snap in .620 TWO POLE 9 2010 Yonkers Road Raleigh, North Carolina 27604 USA Phone: 888-768-2797 or 919-833-0707 Fax: 800-909-9171 or 919-833-8016 Web site: http://www.electro-nc.com E-mail: [email protected]