March 6, 2007 SMD INDUCTOR DR353-3 SERIES Features z z z z z Low Profile Surface Mount Design Flat Top for Pick and Place Inductance Range from 1.0µH to 2200.0µH Operating Temp. -25°C to + 85°C Tinned Leads with Leaded Solder is Available (note 6) ELECTRICAL SPECIFICATIONS AT 25ºC Part No. Inductance (µH) DR353-3-102 DR353-3-122 DR353-3-152 DR353-3-182 DR353-3-222 DR353-3-272 DR353-3-332 DR353-3-392 DR353-3-472 DR353-3-562 DR353-3-682 DR353-3-822 DR353-3-103 DR353-3-123 DR353-3-153 DR353-3-183 DR353-3-223 DR353-3-273 DR353-3-333 DR353-3-393 DR353-3-473 DR353-3-563 DR353-3-683 DR353-3-823 DR353-3-104 DR353-3-124 DR353-3-154 DR353-3-184 DR353-3-224 DR353-3-274 DR353-3-334 DR353-3-394 DR353-3-474 DR353-3-564 DR353-3-684 DR353-3-824 DR353-3-105 DR353-3-125 DR353-3-155 DR353-3-185 DR353-3-225 DATATRONIC: 1.0±20% 1.2±20% 1.5±20% 1.8±20% 2.2±20% 2.7±20% 3.3±20% 3.9±20% 4.7±20% 5.6±20% 6.8±20% 8.2±20% 10±10% 12±10% 15±10% 18±10% 22±10% 27±10% 33±10% 39±10% 47±10% 56±10% 68±10% 82±10% 100±10% 120±10% 150±10% 180±10% 220±10% 270±10% 330±10% 390±10% 470±10% 560±10% 680±10% 820±10% 1000±10% 1200±10% 1500±10% 1800±10% 2200±10% @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1kHz @1kHz @1kHz @1kHz @1kHz @1kHz @1kHz @1kHz @1kHz DCR (Ω) Max. 0.20 0.20 0.30 0.30 0.30 0.32 0.35 0.38 0.40 0.47 0.50 0.56 0.56 0.62 0.73 0.82 0.94 1.1 1.2 1.4 1.5 1.7 1.9 2.2 2.5 3.0 3.7 4.5 5.4 6.8 8.2 9.7 11.8 14.5 17.0 20.5 25.0 30.0 37.0 45.0 50.0 20 20 20 20 20 20 20 20 30 30 30 30 35 35 35 35 35 35 35 35 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 Q Min. @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @1MHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @796kHz @252kHz @252kHz @252kHz @252kHz @252kHz I rated (mA) Max. 500 500 500 500 500 500 500 500 500 500 450 450 400 380 360 340 320 300 270 240 220 200 180 170 160 150 130 120 110 100 95 90 80 70 65 60 50 45 40 35 30 SRF (MHz) Min. 120 100 85 75 62 53 47 41 38 33 31 27 23 21 19 17 15 14 12 11 10 9.3 8.4 7.5 6.8 6.2 5.5 5.0 4.5 4.0 3.6 3.3 3.0 2.7 2.5 2.2 2.0 1.8 1.6 1.5 1.3 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specification are subject to change without notice. March 6, 2007 MECHANICAL OUTLINES 4.5 0.3 2.0 1.2 2.0 353-3 XXX 3.0 TOP VIEW PCB SOLDER PAD LAYOUT (REF.) 2.6 0.3 1 FRONT VIEW 1.0 Min. 1.0 Min. 1.0 Min. 2 SCHEMATIC 3.2 0.2 BOTTOM VIEW Notes: 1. All dimensions are shown in millimeter “mm” 2. General tolerance ±0.2mm, unless other specified 3. Irated for an approximate 40°C temperature rise 4. Irated for an approximate 20% drop maximum of the initial value 5. Tape and reel quantity, 500 pcs/reel 6. For non-RoHS parts replace DR prefix with 42- (e.g. DR353-3 becomes 42-353-3) 7. Terminal finish is compliant to RoHS requirements. Solder in accordance with J-STD-020C DATATRONIC: 28151Highway 74, Romoland, CA 92585 Tel: 951-928-7700 Toll Free Tel: 888-889-5391 Fax: 951-928-7701 Email: [email protected] 499 King’s Road, Hong KongTel: (852) 2562 3858, (852) 2564 8477 Fax: (852) 2565 7214, (852) 2563 1290 All specifications are subject to change without notice