STMicroelectronics L7915C Negative voltage regulator Datasheet

L7900
SERIES
NEGATIVE VOLTAGE REGULATORS
■
OUTPUT CURRENT UP TO 1.5A
■
OUTPUT VOLTAGES OF -5; -5.2; -6; -8; -9;
-12; -15; -18; -20; -22; -24V
■
THERMAL OVERLOAD PROTECTION
■
SHORT CIRCUIT PROTECTION
■
OUTPUT TRANSITION SOA PROTECTION
DESCRIPTION
The L7900 series of three-terminal negative
regulators is available in TO-220, TO-220FP,
TO-3 and D2PAK packages and several fixed
output voltages, making it useful in a wide range of
applications. These regulators can provide local
on-card regulation, eliminating the distribution
problems associated with single point regulation;
furthermore, having the same voltage option as
the L7800 positive standard series, they are
particularly suited for split power supplies. In
addition, the -5.2V is also available for ECL
system. If adequate heat sinking is provided, they
can deliver over 1.5A output current.
Although designed primarily as fixed voltage
regulators, these devices can be used with
external components to obtain adjustable voltages
and currents.
TO-220
D2PAK
TO-220FP
TO-3
SCHEMATIC DIAGRAM
February 2003
1/16
L7900 SERIES
ABSOLUTE MAXIMUM RATINGS
Symbol
VI
Parameter²
DC Input Voltage
Value
for VO = 5 to 18V
-35
for VO = 20, 24V
-40
Unit
V
Output Current
Internally Limited
Ptot
Power Dissipation
Internally Limited
Tstg
Storage Temperature Range
Top
Operating Junction Temperature Range
IO
-65 to 150
°C
0 to 150
°C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is
not implied.
THERMAL DATA
Symbol
D2PAK
Parameter
TO-220
TO-220FP
TO-3
Unit
Rthj-case
Thermal Resistance Junction-case
Max
3
3
5
4
°C/W
Rthj-amb
Thermal Resistance Junction-ambient
Max
62.5
50
60
35
°C/W
CONNECTION DIAGRAM (top view)
TO-220
D2PAK
2/16
TO-220FP
TO-3
L7900 SERIES
ORDERING CODES
TYPE
TO-220
D2PAK (*)
TO-220FP
TO-3
OUTPUT VOLTAGE
L7905C
L7952C
L7906C
L7908C
L7912C
L7915C
L7918C
L7920C
L7922C
L7924C
L7905CV
L7952CV
L7906CV
L7908CV
L7912CV
L7915CV
L7918CV
L7920CV
L7922CV
L7924CV
L7905ACD2T
L7952ACD2T
L7906ACD2T
L7908ACD2T
L7912ACD2T
L7915ACD2T
L7918ACD2T
L7920ACD2T
L7922ACD2T
L7924ACD2T
L7905CP
L7905CT
L7952CT
L7906CT
L7908CT
L7912CT
L7915CT
L7918CT
L7920CT
L7922CT
L7924CT
-5 V
-5.2 V
-6 V
-8 V
-12 V
-15 V
-18 V
-20 V
-22 V
-24 V
L7906CP
L7908CP
L7912CP
L7915CP
L7918CP
L7920CP
L7924CP
(*) Available in Tape & Reel with the suffix "-TR".
TEST CIRCUIT
ELECTRICAL CHARACTERISTICS OF L7905C (refer to the test circuits, TJ = 0 to 125°C, VI = -10V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = -5 mA to -1 A
VI = 8 to 20 V
∆VO(*)
Line Regulation
∆VO(*)
Id
∆Id
Load Regulation
PO ≤ 15 W
Min.
Typ.
-4.8
-5
-5.2
V
-5
-5.25
V
mV
VI = -7 to -25 V
TJ = 25°C
100
TJ = 25°C
50
IO = 5 mA to 1.5 A
TJ = 25°C
100
IO = 250 to 750 mA
TJ = 25°C
50
TJ = 25°C
Quiescent Current Change
IO = 5 mA to 1 A
VI = -8 to -25 V
eN
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
mV
3
mA
0.5
mA
1.3
IO = 5 mA
Output Noise Voltage
SVR
Unit
-4.75
VI = -8 to -12 V
Quiescent Current
∆VO/∆T Output Voltage Drift
Max.
TJ = 25°C
54
∆VO = 100 mV
-0.4
mV/°C
100
µV
60
dB
1.4
V
2.1
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
3/16
L7900 SERIES
ELECTRICAL CHARACTERISTICS OF L7952C (refer to the test circuits, TJ = 0 to 125°C, VI = -10V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = -5 mA to -1 A
VI = -9 to -21 V
∆VO(*)
Line Regulation
∆VO(*)
Id
∆Id
Load Regulation
Max.
Unit
-5.0
-5.2
-5.4
V
-4.95
-5.2
-5.45
V
mV
VI = -8 to -25 V
TJ = 25°C
105
VI = -9 to -12 V
TJ = 25°C
52
IO = 5 mA to 1.5 A
TJ = 25°C
105
IO = 250 to 750 mA
TJ = 25°C
52
mV
TJ = 25°C
3
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = -9 to -25 V
1.3
IO = 5 mA
Output Noise Voltage
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
SVR
Typ.
Quiescent Current
∆VO/∆T Output Voltage Drift
eN
PO ≤ 15 W
Min.
TJ = 25°C
54
∆VO = 100 mV
-0.5
mV/°C
125
µV
60
dB
1.4
V
2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7906C (refer to the test circuits, TJ = 0 to 125°C, VI = -11V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
VO
Output Voltage
TJ = 25°C
-5.75
-6
-6.25
V
VO
Output Voltage
IO = -5 mA to -1 A PO ≤ 15 W
VI = -9.5 to -21.5 V
-5.7
-6
-6.3
V
∆VO(*)
Line Regulation
mV
∆VO(*)
Id
∆Id
Load Regulation
Quiescent Current
Quiescent Current Change
∆VO/∆T Output Voltage Drift
eN
VI = -8.5 to -25 V
TJ = 25°C
120
VI = -9 to -15 V
TJ = 25°C
60
IO = 5 mA to 1.5 A
TJ = 25°C
120
IO = 250 to 750 mA
TJ = 25°C
60
TJ = 25°C
3
mA
IO = 5 mA to 1 A
0.5
mA
VI = -9.5 to -25 V
1.3
IO = 5 mA
Output Noise Voltage
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
SVR
mV
TJ = 25°C
54
∆VO = 100 mV
-0.6
mV/°C
144
µV
60
dB
1.4
V
2
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
4/16
L7900 SERIES
ELECTRICAL CHARACTERISTICS OF L7908C (refer to the test circuits, TJ = 0 to 125°C, VI = -14V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
VO
Output Voltage
TJ = 25°C
-7.7
-8
-8.3
V
VO
Output Voltage
IO = -5 mA to -1 A PO ≤ 15 W
VI = -11.5 to -23 V
-7.6
-8
-8.4
V
∆VO(*)
Line Regulation
mV
∆VO(*)
Id
∆Id
Load Regulation
VI = -10.5 to -25 V
TJ = 25°C
160
VI = -11 to -17 V
TJ = 25°C
80
IO = 5 mA to 1.5 A
TJ = 25°C
160
IO = 250 to 750 mA
TJ = 25°C
80
Quiescent Current
TJ = 25°C
Quiescent Current Change
IO = 5 mA to 1 A
VI = -11.5 to -25 V
∆VO/∆T Output Voltage Drift
eN
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
SVR
3
mA
0.5
mA
1
IO = 5 mA
Output Noise Voltage
mV
TJ = 25°C
54
∆VO = 100 mV
-0.6
mV/°C
175
µV
60
dB
1.1
V
1.5
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7912C (refer to the test circuits, TJ = 0 to 125°C, VI = -19V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
VO
Output Voltage
TJ = 25°C
-11.5
-12
-12.5
V
VO
Output Voltage
IO = -5 mA to -1 A PO ≤ 15 W
VI = -15.5 to -27 V
-11.4
-12
-12.6
V
∆VO(*)
Line Regulation
mV
∆VO(*)
Id
∆Id
Load Regulation
Quiescent Current
Quiescent Current Change
∆VO/∆T Output Voltage Drift
eN
VI = -14.5 to -30 V
TJ = 25°C
240
VI = -16 to -22 V
TJ = 25°C
120
IO = 5 mA to 1.5 A
TJ = 25°C
240
IO = 250 to 750 mA
TJ = 25°C
120
TJ = 25°C
3
mA
IO = 5 mA to 1 A
0.5
mA
VI = -15 to -30 V
1
IO = 5 mA
Output Noise Voltage
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
SVR
mV
TJ = 25°C
54
∆VO = 100 mV
-0.8
mV/°C
200
µV
60
dB
1.1
V
1.5
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
5/16
L7900 SERIES
ELECTRICAL CHARACTERISTICS OF L7915C (refer to the test circuits, TJ = 0 to 125°C, VI = -23V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
Min.
Typ.
Max.
Unit
VO
Output Voltage
TJ = 25°C
-14.4
-15
-15.6
V
VO
Output Voltage
IO = -5 mA to -1 A PO ≤ 15 W
VI = -18.5 to -30 V
-14.3
-15
-15.7
V
∆VO(*)
Line Regulation
mV
∆VO(*)
Id
∆Id
Load Regulation
VI = -17.5 to -30 V
TJ = 25°C
300
VI = -20 to -26 V
TJ = 25°C
150
IO = 5 mA to 1.5 A
TJ = 25°C
300
IO = 250 to 750 mA
TJ = 25°C
150
Quiescent Current
TJ = 25°C
Quiescent Current Change
IO = 5 mA to 1 A
VI = -18.5 to -30 V
∆VO/∆T Output Voltage Drift
eN
3
mA
0.5
mA
1
IO = 5 mA
Output Noise Voltage
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
SVR
mV
TJ = 25°C
54
∆VO = 100 mV
-0.9
mV/°C
250
µV
60
dB
1.1
V
1.3
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7918C (refer to the test circuits, TJ = 0 to 125°C, VI = -27V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = -5 mA to -1 A
VI = -22 to -33 V
∆VO(*)
Line Regulation
∆VO(*)
Id
∆Id
Load Regulation
Quiescent Current
Quiescent Current Change
∆VO/∆T Output Voltage Drift
eN
PO ≤ 15 W
Typ.
Max.
Unit
-17.3
-18
-18.7
V
-17.1
-18
-18.9
V
mV
VI = -21 to -33 V
TJ = 25°C
360
VI = -24 to -30 V
TJ = 25°C
180
IO = 5 mA to 1.5 A
TJ = 25°C
360
IO = 250 to 750 mA
TJ = 25°C
180
TJ = 25°C
mV
3
mA
IO = 5 mA to 1 A
0.5
mA
VI = -22 to -33 V
1
IO = 5 mA
Output Noise Voltage
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
SVR
Min.
TJ = 25°C
54
∆VO = 100 mV
-1
mV/°C
300
µV
60
dB
1.1
V
1.1
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
6/16
L7900 SERIES
ELECTRICAL CHARACTERISTICS OF L7920C (refer to the test circuits, TJ = 0 to 125°C, VI = -29V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = -5 mA to -1 A
VI = -24 to -35 V
∆VO(*)
Line Regulation
∆VO(*)
Id
∆Id
Load Regulation
Max.
-19.2
-20
-20.8
V
-19
-20
-21
V
mV
VI = -23 to -35 V
TJ = 25°C
400
VI = -26 to -32 V
TJ = 25°C
200
IO = 5 mA to 1.5 A
TJ = 25°C
400
IO = 250 to 750 mA
TJ = 25°C
200
Unit
mV
TJ = 25°C
3
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = -24 to -35 V
1
IO = 5 mA
Output Noise Voltage
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
SVR
Typ.
Quiescent Current
∆VO/∆T Output Voltage Drift
eN
PO ≤ 15 W
Min.
TJ = 25°C
54
∆VO = 100 mV
-1.1
mV/°C
350
µV
60
dB
1.1
V
0.9
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
ELECTRICAL CHARACTERISTICS OF L7922C (refer to the test circuits, TJ = 0 to 125°C, VI = -31V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = -5 mA to -1 A
VI = -26 to -37 V
∆VO(*)
Line Regulation
∆VO(*)
Id
∆Id
Load Regulation
Quiescent Current
Quiescent Current Change
∆VO/∆T Output Voltage Drift
eN
PO ≤ 15 W
Typ.
Max.
Unit
-21.1
-22
-22.9
V
-20.9
-22
-23.1
V
mV
VI = -25 to -37 V
TJ = 25°C
440
VI = -28 to -34 V
TJ = 25°C
220
IO = 5 mA to 1.5 A
TJ = 25°C
440
IO = 250 to 750 mA
TJ = 25°C
220
TJ = 25°C
mV
3
mA
IO = 5 mA to 1 A
0.5
mA
VI = -26 to -37 V
1
IO = 5 mA
Output Noise Voltage
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
SVR
Min.
TJ = 25°C
54
∆VO = 100 mV
-1.1
mV/°C
375
µV
60
dB
1.1
V
1.1
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
7/16
L7900 SERIES
ELECTRICAL CHARACTERISTICS OF L7924C (refer to the test circuits, TJ = 0 to 125°C, VI = -33V,
IO = 500 mA, CI = 2.2 µF, CO = 1 µF unless otherwise specified).
Symbol
Parameter
Test Conditions
VO
Output Voltage
TJ = 25°C
VO
Output Voltage
IO = -5 mA to -1 A
VI = -27 to -38 V
∆VO(*)
Line Regulation
∆VO(*)
Id
∆Id
Load Regulation
Max.
Unit
-23
-24
-24.5
V
-22.8
-24
-25.2
V
mV
VI = -27 to -38 V
TJ = 25°C
480
VI = -30 to -36 V
TJ = 25°C
240
IO = 5 mA to 1.5 A
TJ = 25°C
480
IO = 250 to 750 mA
TJ = 25°C
240
mV
TJ = 25°C
3
mA
Quiescent Current Change
IO = 5 mA to 1 A
0.5
mA
VI = -27 to -38 V
1
IO = 5 mA
Output Noise Voltage
B = 10Hz to 100KHz
Supply Voltage Rejection
∆VI = 10 V
f = 120Hz
Vd
Dropout Voltage
IO = 1 A
TJ = 25°C
Isc
Short Circuit Current
SVR
Typ.
Quiescent Current
∆VO/∆T Output Voltage Drift
eN
PO ≤ 15 W
Min.
TJ = 25°C
54
∆VO = 100 mV
-1
mV/°C
400
µV
60
dB
1.1
V
1.1
A
(*) Load and line regulation are specified at constant junction temperature. Changes in VO due to heating effects must be taken into account
separately. Pulse testing with low duty cycle is used.
APPLICATIONS INFORMATION
Figure 1 : Fixed Output Regulator
NOTE:
1. To specify an output voltage, substitute voltage value for "XX".
2. Required for stability. For value given, capacitor must be solid tantalum. If aluminium electrolytics are used, at least ten times value should
be selected. C1 is required if regulator is located an appreciable distance from power supply filter.
3. To improve transient response. If large capacitors are used, a high current diode from input to output (1N4001 or similar) should be introduced to protect the device from momentary input short circuit.
8/16
L7900 SERIES
Figure 2 : Split Power Supply (± 15V/1A)
Against potential latch-up problems.
Figure 3 : Circuit for Increasing Output Voltage
R1 + R2
VO = Vxx 
R2
Vxx

> 3Id
R2
C3 Optional for improved transient response and ripple rejection.
Figure 4 : High Current Negative Regulator (-5V/4A with 5A current limiting)
9/16
L7900 SERIES
Figure 5 : Typical ECL System Power Supply (-5.2V/4A)
Optional dropping resistor to reduce the power dissipated in the boost transistor.
10/16
L7900 SERIES
TO-3 MECHANICAL DATA
mm.
DIM.
MIN.
A
inch
TYP
MAX.
MIN.
TYP.
11.85
B
0.96
MAX.
0.466
1.05
1.10
0.037
0.041
0.043
C
1.70
0.066
D
8.7
0.342
E
20.0
0.787
G
10.9
0.429
N
16.9
0.665
P
26.2
R
3.88
1.031
4.09
U
0.152
39.5
V
1.555
30.10
1.185
A
P
D
C
O
N
B
V
E
G
U
0.161
R
P003C/C
11/16
L7900 SERIES
TO-220 MECHANICAL DATA
DIM.
mm.
MIN.
TYP
inch
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
C
1.23
1.32
0.048
0.051
D
2.40
2.72
0.094
0.107
D1
1.27
0.050
E
0.49
0.70
0.019
0.027
F
0.61
0.88
0.024
0.034
F1
1.14
1.70
0.044
0.067
F2
1.14
1.70
0.044
0.067
G
4.95
5.15
0.194
0.203
G1
2.4
2.7
0.094
0.106
H2
10.0
10.40
0.393
0.409
L2
16.4
0.645
L4
13.0
14.0
0.511
0.551
L5
2.65
2.95
0.104
0.116
L6
15.25
15.75
0.600
0.620
L7
6.2
6.6
0.244
0.260
L9
3.5
3.93
0.137
0.154
DIA.
3.75
3.85
0.147
0.151
P011C
12/16
L7900 SERIES
TO-220FP MECHANICAL DATA
mm.
DIM.
MIN.
inch
TYP
MAX.
MIN.
TYP.
MAX.
A
4.40
4.60
0.173
0.181
B
2.5
2.7
0.098
0.106
D
2.5
2.75
0.098
0.108
E
0.45
0.70
0.017
0.027
F
0.75
1
0.030
0.039
F1
1.15
1.50
0.045
0.059
F2
1.15
1.50
0.045
0.059
G
4.95
5.2
0.194
0.204
G1
2.4
2.7
0.094
0.106
H
10.0
10.40
0.393
0.409
L2
16
0.630
28.6
30.6
1.126
1.204
L4
9.8
10.6
0.385
0.417
L6
15.9
16.4
0.626
0.645
L7
9
9.3
0.354
0.366
DIA.
3
3.2
0.118
0.126
B
D
A
E
L3
L3
L6
F2
H
G
G1
¯
F
F1
L7
1 2 3
L2
L4
7012510/F
13/16
L7900 SERIES
D2PAK MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
MAX.
MIN.
TYP.
MAX.
A
4.4
4.6
0.173
0.181
A1
2.49
2.69
0.098
0.106
A2
0.03
0.23
0.001
0.009
B
0.7
0.93
0.027
0.036
B2
1.14
1.7
0.044
0.067
C
0.45
0.6
0.017
0.023
C2
1.23
1.36
0.048
0.053
D
8.95
9.35
0.352
0.368
10.4
0.393
4.88
5.28
0.192
D1
E
8
10
E1
G
0.315
8.5
0.409
0.335
0.208
L
15
15.85
0.590
0.624
L2
1.27
1.4
0.050
0.055
L3
1.4
1.75
0.055
0.068
M
2.4
3.2
0.094
R
V2
0.4
0˚
0.126
0.016
8˚
0˚
8˚
P011P6G
14/16
L7900 SERIES
Tape & Reel D2PAK-P 2PAK-D 2PAK/A-P 2PAK/A MECHANICAL DATA
mm.
inch
DIM.
MIN.
TYP
A
MAX.
MIN.
TYP.
180
13.0
7.086
C
12.8
D
20.2
0.795
N
60
2.362
T
13.2
MAX.
0.504
0.512
14.4
0.519
0.567
Ao
10.50
10.6
10.70
0.413
0.417
0.421
Bo
15.70
15.80
15.90
0.618
0.622
0.626
Ko
4.80
4.90
5.00
0.189
0.193
0.197
Po
3.9
4.0
4.1
0.153
0.157
0.161
P
11.9
12.0
12.1
0.468
0.472
0.476
15/16
L7900 SERIES
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the
consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from
its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications
mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information
previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of STMicroelectronics.
© The ST logo is a registered trademark of STMicroelectronics
© 2003 STMicroelectronics - Printed in Italy - All Rights Reserved
STMicroelectronics GROUP OF COMPANIES
Australia - Brazil - Canada - China - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco
Singapore - Spain - Sweden - Switzerland - United Kingdom - United States.
© http://www.st.com
16/16
Similar pages