Agilent HDSP-S51E Series 27.4 mm (1.08 inch) General Purpose 5 x 7 Dot Matrix Alphanumeric Displays Data Sheet Description These displays have a 27.4 mm (1.08 inch) character height and use industry standard size and pinout. The devices are available in either common row anode or common row cathode configurations. The displays come in only black face paint and are available in a choice of GaP Red (HER) or GaP Green colors. The Bi-color display consists of GaP Red and Green colors. These parts are subjected to Outgoing Quality Assurance (OQA) inspection with an AQL of 0.065% for functional and visual/ cosmetic defects. Features • 5 x 7 Dot matrix font • Stackable horizontally • Industry standard pin-out – 22.86 mm (0.9 in.) Dual-In-Line (DIP) leads on 2.54 mm (0.1 in.) centers • Choice of colors – Single color: GaP Red or GaP Green – Bi-color: GaP Red and GaP Green • Face paint color: black • Design flexibility – Common row anode or common row cathode • Categorized for luminous intensity or luminance • Green categorized for color Devices GaP Red Green HDSPHDSPS51E S51G S56E S56G B51Z B56Z Description 27.4 mm Black Surface Common Row Anode 27.4 mm Black Surface Common Row Cathode 27.4 mm Black Surface Bi-Color Common Row Anode 27.4 mm Black Surface Bi-Color Common Row Cathode Note: 1. For details, please contact your local Agilent components sales office or an authorized distributor. Applications • Suitable for indoor use • Not recommended for industrial applications, i.e., operating temperature requirements exceeding 85°C or below -35°C • Extreme temperature cycling not recommended[1] Package Dimensions Single Color 22.60 (0.890) 0.50 (0.020) COL 1 2 3 4 5 ROW 1 2 4.57 (0.180) 31.80 (1.252) 3 27.42 (1.080) 4 5 6 7 3.00 (0.118) 4.57 (0.180) 31.80 (1.252) 7.00 (0.276) PART NO. 3.26 (0.128) 8.00 (0.315) PIN 1 2.54 (0.10) 2.54 x 6 = 15.24 (0.1 x 6 = 0.60) 2 0.51 (0.020) 22.85 (0.900) Internal Circuit Diagram Common Row Cathode (Single Color) COLUMN PIN 9 2 14 3 3 2 3 4 5 3 4 10 6 PIN NO. ROW 1 1 13 8 4 5 12 5 1 6 7 7 2 CONNECTION 1 ROW 5 2 3 ROW 7 COLUMN 2 4 COLUMN 3 5 6 ROW 4 COLUMN 5 7 ROW 6 8 9 10 ROW 3 ROW 1 COLUMN 4 11 12 13 COLUMN 3 ROW 4 COLUMN 1 14 ROW 2 Internal Circuit Diagram Common Row Anode (Single Color) COLUMN PIN 1 2 13 3 3 4 11 4 5 10 6 PIN NO. CONNECTIION 1 2 3 4 5 6 7 8 ROW 5 ROW 7 COLUMN 2 COLUMN 3 ROW 4 COLUMN 5 ROW 6 ROW 3 9 ROW 1 10 11 12 13 14 COLUMN 4 COLUMN 3 ROW 4 COLUMN 1 ROW 2 ROW 1 9 2 14 4 3 8 4 5 12 5 1 6 7 7 2 Package Dimensions Bi-Color 22.60 (0.890) 0.50 (0.020) COL 1 2 3 4 5 ROW 1 2 4.57 (0.180) 3 31.80 27.42 (1.252) (1.080) 4 5 6 7 4.57 (0.180) 3.00 (0.118) 31.80 (1.252) 7.00 (0.276) PART NO. 3.26 (0.128) 8.00 (0.315) PIN 1 2.00 (0.079) 2 x 9 = 18.00 (0.079 x 9 = 0.709) 5 0.51 (0.020) 22.85 (0.900) Internal Circuit Diagram Common Row Cathode (Bi-Color) COLUMN PIN 1 2 3 4 5 3 4 5 6 7 PIN NO. ROW 1 20 19 2 18 17 3 16 15 4 14 13 5 12 11 6 9 8 7 2 1 6 THE SIGN STANDS FOR HER COLOR DICE THE SIGN STANDS FOR GREEN COLOR DICE CONNECTION 1 2 ROW 7 (GREEN) ROW 7 (HER) 3 4 COLUMN 1 COLUMN 2 5 6 COLUMN 3 COLUMN 4 7 8 9 10 11 12 13 COLUMN 5 ROW 6 (GREEN) ROW 6 (HER) NC ROW 5 (GREEN) ROW 5 (HER) ROW 4 (GREEN) 14 15 16 17 18 19 20 ROW 4 (HER) ROW 3 (GREEN) ROW 3 (HER) ROW 2 (GREEN) ROW 2 (HER) ROW 1 (GREEN) ROW 1 (HER) Internal Circuit Diagram Common Row Anode (Bi-Color) COLUMN PIN ROW 1 1 2 3 4 5 3 4 5 6 7 20 19 2 18 17 3 16 15 4 14 13 5 12 11 6 9 8 7 2 1 7 THE SIGN STANDS FOR HER COLOR DICE THE SIGN STANDS FOR GREEN COLOR DICE PIN NO. CONNECTION 1 ROW 7 (GREEN) 2 3 ROW 7 (HER) COLUMN 1 4 5 COLUMN 2 COLUMN 3 6 7 COLUMN 4 COLUMN 5 8 9 10 11 12 13 14 ROW 6 (GREEN) ROW 6 (HER) NC ROW 5 (GREEN) ROW 5 (HER) ROW 4 (GREEN) ROW 4 (HER) 15 16 ROW 3 (GREEN) ROW 3 (HER) 17 18 19 20 ROW 2 (GREEN) ROW 2 (HER) ROW 1 (GREEN) ROW 1 (HER) Absolute Maximum Ratings at TA = 25˚C Parameter Average Power per Dot[1] Peak Forward Current per Dot[1] (1/8 Duty Cycle at 10 KHz) Average Forward Current per Dot Reverse Voltage per Dot Operating Temperature Storage Temperature Lead Solder Temperature for 3 seconds[4] (2 mm [0.078 in.] below seating plane) GaP Red HDSP-S51E/S56E/B51Z/B56Z 65 GaP Green HDSP-S51G/S56G/B51Z/B56Z 65 Units mW 80 25[1,2] 3 –35 to +85 –35 to +85 100 25[1,3] 3 –35 to +85 –35 to +85 mA mA V °C °C 260 260 °C Notes: 1. Do not exceed maximum average current per dot. 2. Derate above 25°C at 0.20 mA/°C. 3. Derate above 25°C at 0.33 mA/°C. 4. Not recommended to be soldered more than 2 times. Minimum interval between solderings is 15 minutes. Total soldering time not to exceed 3 seconds. 8 Optical/Electrical Characteristics at TA = 25°C GaP Red Devices HDSPParameter Luminous Intensity/Unit (Digit Average)[1] Peak Wavelength S51E Dominant Wavelength[2] S56E B51Z Forward Voltage B56Z Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv λpeak λd VF VR Iv-m Min. 0.97 Typ. 1.5 632 622 2.1 Max. 3.3 2.6 3.0 Units mcd nm nm V V 2:1 Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor GaP Green Devices HDSPParameter Luminous Intensity/Unit (Digit Average)[1] Peak Wavelength S51G Dominant Wavelength[2] S56G B51Z Forward Voltage B56Z Reverse Voltage[3] Luminous Intensity Matching Ratio Symbol Iv λpeak λd VF VR Iv-m Min. 1.46 Typ. 3.0 568 573 2.3 Max. 4.97 2.6 3.0 Units mcd nm nm V V 2:1 Test Conditions IFP = 40 mA, 1/8 Duty Factor IF = 20 mA IF = 20 mA IF = 20 mA IR = 100 µA IFP = 40 mA, 1/8 Duty Factor Bi-Color Devices HDSPParameter Luminance/Unit B51Z (Digit Average)[1] B56Z Symbol Iv Min. 86.0 Typ. 180.0 Max. 310.0 Units Cd/m2 Test Conditions IFP = 40 mA, 1/8 Duty Factor Notes: 1. The digits are categorized for luminance. The luminance category is designated by a letter on the side of the package. 2. The dominant wavelength, λd, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 3. Typical specification for reference only. Do not exceed absolute maximum ratings. 9 Intensity Bin Limits[1] (mcd at IFP = 40 mA, 1/8 Duty Factor) GaP Red Bin Name E F G Min.[2] 0.97 1.46 2.2 Max.[2] 1.45 2.19 3.3 Min.[2] 1.46 2.20 3.31 Max.[2] 2.19 3.30 4.97 GaP Green Bin Name F G H Bi-Color (Cd/m2 at IFP = 40 mA, 1/8 Duty Factor) Min.[2] 86 104.1 124.1 149.1 179.1 215.1 258.1 Bin Name F G H I J K L Max.[2] 104 124 149 179 215 258 310 Hue Grade Coordinate X Y 4 0.542-0.553 0.445-0.456 5 0.552-0.563 0.435-0.446 6 0.562-0.573 0.425-0.436 Bin 7 0.572-0.583 0.415-0.426 8 0.582-0.593 0.405-0.416 9 0.592-0.603 0.395-0.406 Notes: 1. Hue categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each intensity bin limit is ± 10%. Color Bin Limits (nm)[1] Green Bin Name 3 4 5 Min.[2] 569.1 571.1 573.1 Max.[2] 571 573 575 Notes: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. 2. Tolerance for each color bin limit is ± 1.0 nm. 10 10 0.602-0.613 0.385-0.396 25 GaP RED 20 15 GaP GREEN 10 5 0 0 20 40 60 80 100 IF – FORWARD CURRENT PER DOT – mA IDC – MAXIMUM DC CURRENT PER DOT – mA 30 50 40 GaP RED 30 GaP GREEN 20 10 0 0 0.5 Figure 1. Maximum allowable average current per dot vs. ambient temperature. RELATIVE LUMINANCE (NORMALIZED TO 1 AT 40 mA PEAK) RELATIVE EFFICIENCY GaP RED 1.0 GaP GREEN 0.8 0.6 0.4 0.2 0 10 20 30 40 50 60 IPEAK – PEAK DOT CURRENT – mA Figure 3. Relative efficiency (luminous intensity per dot) vs. peak current per dot. 11 1.5 2.0 2.5 3.0 Figure 2. Forward current vs. forward voltage. 1.2 0 1.0 VF – FORWARD VOLTAGE – V TA – AMBIENT TEMPERATURE – °C 70 2.5 2.0 1.5 1.0 0.5 0 0 20 40 60 80 100 IPEAK – PEAK FORWARD CURRENT – mA Figure 4. Relative luminance vs. peak forward current. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. Device Reliability For reliability information, please see the reliability data sheet 27.4 mm General Purpose 5 x 7 Dot Matrix Alphanumeric Displays. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 271 2451 India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194 Malaysia, Singapore: (+65) 271 2054 Taiwan: (+65) 271 2654 Data subject to change. Copyright © 2002 Agilent Technologies, Inc. Obsoletes 5988-1730EN January 17, 2002 5988-5283EN