Advantech AMAX-2241-PMA Gx2-400 machine control box with Datasheet

AMAX-2050KW
AMAX-2050FCE
GX2-400 Machine Control Box with
AMONet Interface
GX2-400 Machine Control Box with
AMONet and CAN Interface
Features
NEW
 Onboard AMD Geode™ GX2 processor, up to 256 MB onboard DDR
 128 Kbyte battery backup RAM
 Supports AMONet series for remote motion control and data acquisition
 2 x RS-232 ports and 1 x RS-422/485 port with automatic flow control
 1 x 10/100 Base-T RJ-45 port and 2 x USB ports
 4 x programmable diagnostic LEDs and 1 x buzzer
 KW ready solution (AMAX-2050KW only)
 Suitable for DIN-rail mounting
AMAX-2050FCE
AMAX-2050KW
RoHS
COMPLIANT
2002/95/EC
Introduction
Advantech's AMAX-2050KW is a Pentium® III grade platform with an onboard AMONet controller, which is designed for embedded machine automation applications. From the
peripheral point of view, with one AMONet master port AMAX-2050KW can control up to 2048 I/O points or 256 axes. Also, AMAX-2050KW offers one LAN and dual USB interfaces
to fulfill user’s various communication needs. In addition, it also offers two RS-232 and one RS-422/485 communication ports with automatic flow control functionality.
AMAX-2050KW supports Windows CE .NET, which offers a pre-configured image with optimized onboard device drivers. MULTIPROG supports all IEC 61131-3 programming
languages. Depending on the task to be handled, your experience and company standards, you may choose one of the five standardized programming languages. AMAX-2050FCE
comes with a built-in CAN interface to ensure data transmission and support for the DLL library, making it suitable for WinCE development.
Specifications
General
Communications
 Certifications
CE
 Dimensions (L x W x H) 125 x 47.6 x 151 mm (4.9" x 1.8" x 5.9")
 Power Consumption
Typical: 8 W
Max.:15 W
 Power Supply
Min. 15 W (9 ~ 36 VDC) (e.g +24 V @ 625 mA)
 OS Support
Windows® CE .NET 5.0
 Serial Ports
System Hardware
 CPU
 Battery Backup RAM
 Indicators
 Keyboard/Mouse
 Memory
 Storage
 VGA
 Watchdog Timer
AMD Geode GX2-400
512 KB
Power, CF, alarm for RAM backup battery and
4 x programmable diagnostic LEDs
1 x PS/2
256 MB DDR onboard
SSD: 1 x internal (Master Card) & 1 x external
(Slave Module) type I/II CompactFlash® slot
DB15 VGA connector
Programmable
Motion Control I/O Modules
 Serial Port Speed
 LAN
 USB Ports
 AMONet Rings
 CAN Port
2 x RS-232 and 1 x RS-422/485
Isolation with automatic RS-485 data flow control
RS-232: 50 ~ 115.2 kbps
RS-422/485: 50 ~ 921.6 kbps max.
1 x 10/100 Base-T RJ-45 ports
(support RTL 8100B LAN chip)
2 x USB, UHCI, Rev. 1.1 compliant
1 x isolated AMONet, connect up to 2048 digital I/O
channels or 64 motion axes
1 (AMAX-2050FCE)
Environment
 Operating Humidity
5 ~ 85% RH, non-condensing (refer to IEC 68-2-3)
 Operating Temperature 0 ~ 50° C
AMAX-2050KW
AMAX-2050FCE
System Architecture
AMONet
Slave # 1
Slave # 2
Slave # Last
*Slave can be Motion or Digital I/O modules
**Last Slave module needs [Terminator] setting
Ordering Information












AMAX-2050KW
AMAX-2050FCE
AMAX-2241/PMA
AMAX-2242/J2S
AMAX-2243/YS2
AMAX-2752SY
AMAX-2754SY
AMAX-2756SY
PCL-10220M-2
PCL-10150M-2
MPROG-BAS33
MPROG-ADV33
Machine Control Box w/ AMONet Interface
Machine Control Box w/ AMONet and CAN Interface
4-axis AMONet Motion Module for Panasonic Minas A
4-axis AMONet Motion Module for Mitsubishi MR-J2S
4-axis AMONet Motion Module for Yaskawa Sigma-II
32-ch Isolated Digital Input AMONet Module
32-ch Isolated Digital Output AMONet Module
16/16-ch Isolated Digital I/O AMONet Module
20-pin SCSI Cable, 2 m
50-pin SCSI Cable, 2 m
KW Multiprog v3.3 (128-byte I/O)
KW Multiprog v3.3 (64k-byte I/O)
Online Download www.advantech.com/products
Similar pages