AL460 HD FIFO Datasheet AL460 Full HD FIFO Memory Datasheet - Brief Version 1.2 ©2007~2010 by AverLogic Technologies, Corp. INFORMATION FURNISHED BY AVERLOGIC IS BELIEVED TO BE ACCURATE AND RELIABLE. HOWEVER, NO RESPONSIBILITY IS ASSUMED BY AVERLOGIC FOR ITS U SE , N O R F O R AN Y IN F R IN GE ME NTS OF PATE NTS OR O THE R RI GHT S OF T HIRD PARTIES THAT MAY RESULT FROM ITS USE. NO LICENSE IS GRANTED BY IMPLICATION OR OTHERWISE UNDER ANY PATENT OR PATENT RIGHTS OF AVERLOGIC. Doc Number: 1-D-PMK262-0001 ©2007~2010 by AverLogic Technologies, Corp. V1.2 AL460 HD FIFO Datasheet Amendments Revise Date Contents Page 2008.07.01 Preliminary version 0.01 2009.06.04 Revised Reference design schematic: XIN = 14.31818 8 MHz; CSEL[1:0] = VDD33 2009.08.06 Revised Pin definitions: Pin 98 = ROINV; Pin 99 =ROEN. 7 2010.03.12 Update DC and AC Characteristics 10 2010.09.30 Correct Pin Description (ROEN, ROINV) 7 Disclaimer THE CONTENTS OF THIS DOCUMENT ARE SUBJECT TO CHANGE WITHOUT NOTICE. AVERLOGIC TECHNOLOGIES RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. AVERLOGIC DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. CUSTOMERS ARE ADVISED TO CONSULT WITH AVERLOGIC OR ITS COMMERCIAL DISTRIBUTORS BEFORE ORDERING. ©2007~2010 by AverLogic Technologies, Corp. V1.2 2/14 AL460 HD FIFO Datasheet Table of Contents 1 GENERAL DESCRIPTION__________________________________________________ 4 2 FEATURES _______________________________________________________________ 4 3 APPLICATIONS ___________________________________________________________ 5 4 FUNCTION BLOCK DIAGRAM _____________________________________________ 5 5 ORDERING INFORMATION________________________________________________ 6 6 PIN DIAGRAM ____________________________________________________________ 6 6.1 6.2 7 ELECTRICAL CHARACTERISTICS ________________________________________ 10 7.1 7.2 7.3 8 Pin Description__________________________________________________________________ 6 Pin Diagram _____________________________________________________________________ 9 Absolute Maximum Ratings under Free-Air Temperature___________________ 10 Recommended Operating Conditions_________________________________________ 10 DC Characteristics _____________________________________________________________ 10 Mechanical Drawing – 128-PIN LQFP ____________________________________ 12 8.1 14x14x1.4mm 128-Pin LQFP Package________________________________________ 12 ©2007~2010 by AverLogic Technologies, Corp. V1.2 3/14 AL460 HD FIFO Datasheet 1 GENERAL DESCRIPTION The AL460 consists of 128-Mbits of memory density and can be configured as an 8M x 16-bit FIFO (first in first out) at maximum R/W operating speed of 150 MHz. The full HD FIFO can be used in a wide range of applications such as multimedia, video capture systems and many other varieties of video data buffering applications. The size and high-speed data access allow full HD video frame capture up to 1080p resolutions. The AverLogic AL460 FIFO memory provides completely independent input and output ports. The built-in address and pointer control circuits provide a straightforward bus interface to sequentially read/write memory that can reduce inter-chip design efforts. The AL460 uses high performance process technologies with extended controller functions (write mask, read skip etc.); it allows easy operation of non-linearity FIFO read/write for use in broadcasting systems, security systems, cameras and many other applications. The AL460 is designed and manufactured using state-of-the-art technologies with low power consumption AC characteristics (2.5V & 3.3V power supply) facilitating high performance and high quality applications. The chip is available in LQFP 128-pin with exposed die pad package; the small footprint allows product designers to keep board real estate to a minimum. 2 FEATURES • 128-Mbit density, 8M x 16-bit configuration • Polarity Selectable • Supports video NTSC, PAL and HDTV up to 1080p resolution • 2.5V& 3.3V power supply • • Independent 16-bit read/write operations (different I/O data rates acceptable) at a maximum speed of 150 MHz Standard 128-pin LQFP with exposed die pad package • High speed synchronous sequential access • Input/Output enable control ©2007~2010 by AverLogic Technologies, Corp. V1.2 4/14 AL460 HD FIFO Datasheet 3 APPLICATIONS • HD video capture and editing systems • Frame synchronizers • Switcher or format converter boxes • Digital video cameras • Video capture or editing systems • Hard disk cache memory • Video data buffering for security systems • Buffer for communication systems • Scan rate converters • 1080p video data stream buffering • TBC (Time Base Correction) systems 4 FUNCTION BLOCK DIAGRAM The internal structure of each AL460 consists of Input/Output buffers, Write Data Registers, Read Data Registers and main 8M x 16-bit memory cell array and state-of-the-art logic design that takes care of addressing and controlling the read/write data. ©2007~2010 by AverLogic Technologies, Corp. V1.2 5/14 AL460 HD FIFO Datasheet 5 ORDERING INFORMATION Part number Speed Grade Package Power Supply Status AL460A-7-PBF 150 MHz LQFP-128 +2.5V & +3.3 V 2009 AL460A-13-PBF 75 MHz LQFP-128 +2.5V & +3.3 V 2009 Note: AverLogic Technologies PB-free products employ special PB-free material sets; molding compounds/die that attach materials and 100% matte tin plate termination finish do not use materials containing PBB, PBDE or red phosphorus for green-product chips. AverLogic's PB-free products are MSL classified at PB-free peak reflow temperatures that meet or exceed the PB-free requirements of IPC/JEDEC J Std-020C." 6 PIN DIAGRAM 6.1 Pin Description Write Bus Signals Pin name DI[15:0] Pin number I/O type Description I 16-bit data inputs; synchronized with the WCLK clock. Data is acquired at the rising edge of WCLK clock. WEN 58, 56~51, 49~46, 44~41, 39 37 I IE 36 I WCLK 38 I WRST 35 I WFSEL 34 I WEN is the write enable signal that controls the 16-bit input data write and write pointer operation IE is the data input enable signal that controls the enabling/ disabling of the 16-bit data input pins. The internal write address pointer is always incremented at the rising edge of WCLK by enabling WEN regardless of the IE level. WCLK is the write clock input pin. The write data input is synchronized with this clock. The WRST is the write rest signal that resets the write address pointer to 0. Write Frame select pin in Two Frame Mode (TFEN = H): 0: Frame 0 1: Frame 1 *Note: For the polarity definition of all write control signals (WEN, IE and WRST), please refer to the PLRTY pin definition and “Memory Operation” section for details. ©2007~2010 by AverLogic Technologies, Corp. V1.2 6/14 AL460 HD FIFO Datasheet Read Bus Signals Pin name DO[15:0] Pin number I/O Description type O 16-bit data outputs; synchronized with the RCLK clock. Data is output at the rising edge of the RCLK clock. REN 102, 104~107, 109~111, 113~115, 117~120, 122 125 OE 126 I RCLK 124 I RCLKO ROEN 123 99 O I ROINV 98 I RRST 127 I RFSEL 128 I I REN is the read enable signal that controls the 16-bit output data read and read pointer operation. OE is the data input enable signal that controls the enabling/ disabling of the 16-bit data output pins. The internal read address pointer is always incremented at the rising edge of RCLK by enabling REN regardless of the OE level. RCLK is the read clock input pin. The read data output is synchronized with this clock. RCLK loop-out clock RCLKO output clock ENABLE, 0: Disable 1: Enable RCLK loop-out clock inverts control signal, 0: Normal 1: Invert The RRST is the read reset signal that resets the read address pointer to 0. Read Frame select pin in Two Frame Mode (TFEN = H): 0: Frame 0 1: Frame 1 *Note: For the polarity definition of all read control signals (REN, OE, RRST,), please refer to PLRTY pin definition and “Memory Operation” section for details. Power/Ground Signals Pin name VD25M VD25 PLL25 PLLGND VD33 GND Pin number 3, 5, 7, 11, 13, 17, 19, 21, 76, 78, 80, 84, 86, 90, 92, 94 9, 15, 23, 50, 74, 82, 88, 112 70 71 40, 57, 103, 121 4, 6, 8, 10, 12, 14, 16, 18, ©2007~2010 by AverLogic Technologies, Corp. I/O Description type 2.5V ± 5% power supply for internal memory - 2.5V ± 5% power supply for internal control logic 2.5V ± 5% power supply for internal PLL PLL GND 3.3V ± 10% I/O power supply GND V1.2 7/14 AL460 HD FIFO Datasheet 20, 22, 24, 45, 59~63, 73, 75, 77, 79, 81, 83, 85, 87, 89, 91, 93, 95, 97, 100, 101, 108, 116 Miscellaneous Signals Pin name RSTN PLRTY XIN XOUT CSEL[1:0] VREF VREF2 TFEN TEST SCAN NC Pin number I/O Description type 32 I Global reset (active Low) 33 I Select active polarity of the control signals including WEN, REN, WRST, RRST, IE, OE, ROEN and ROINV (total of 8 signals) PLRTY = VD33, active low. PLRTY = GND, active high. Note: during memory operation, the pin must be permanently connected to VD33 or GND. If PLRTY level is changed during memory operation, memory data is not guaranteed. 67 I Crystal input 68 O Crystal output 65, 66 I Crystal input frequency select pins “00” - 11.059200 MHz “01” - 20.000000 MHz “10” - 24.576000 MHz “11” – 14.318180 MHz * Minimum crystal frequency accuracy: ±100 ppm 72 AI Reference voltage input * Please refer to “External decoupling circuit” application note for details 25 AI Reference voltage input 2 * Please refer to “External decoupling circuit” application note for details 96 I Two frame mode enable: “0” – Standard FIFO Mode “1” – Two Frame Mode 1 I Test pin (pull-down for normal operation) 2 I Scan mode Enable (pull-down for normal operation) 26~31, 64, 69 - No connect ©2007~2010 by AverLogic Technologies, Corp. V1.2 8/14 AL460 HD FIFO Datasheet 6.2 Pin Diagram ©2007~2010 by AverLogic Technologies, Corp. V1.2 9/14 AL460 HD FIFO Datasheet 7 ELECTRICAL CHARACTERISTICS 7.1 Absolute Maximum Ratings under Free-Air Temperature (Excessive ratings are harmful to the lifetime of the product. These are guidelines that are not yet tested.) Parameter 7.2 Unit VD33 3.3V I/O Supply Voltage -0.3 ~ +4.5 V VD25M 2.5V Memory Voltage -0.3 ~ +3.4 V VD25 2.5V Core Voltage -0.3 ~ +3.4 V PLL25 2.5V PLL Voltage -0.3 ~ +3.4 V VP Pin Voltage -0.3 ~ +(VD33 + 0.3) V IO Output Current -20 ~ +20 mA TAMB Ambient Op. Temperature 0 ~ +70 °C Tstg Storage temperature -40 ~ +125 °C Recommended Operating Conditions Parameter 7.3 Rating Min Typ Max Unit VD33 3.3V I/O Supply Voltage 3.0 3.3 3.6 V VD25M 2.5V Memory Voltage 2.37 2.5 2.63 V VD25 2.5V Core Voltage 2.37 2.5 2.63 V PLL25 2.5V PLL Voltage 2.37 2.5 2.63 V VIH High Level Input Voltage 0.7VD33 - VD33 V VIL Low Level Input Voltage 0 - 0.3VD33 V Max Unit DC Characteristics (VD33 = 3.3V, VD25M = VD25 = PLL25 = 2.5V; TAMB = 0 to 70°C) Parameter Min Typ IDD33 Operating Current 100 mA IDD25 Operating Current 185 mA IDD25M Operating Current 78 mA ©2007~2010 by AverLogic Technologies, Corp. V1.2 10/14 AL460 HD FIFO Datasheet * Operating condition: WCLK = RCLK = 150 MHz; Data toggle rate = 20 MHz IDD33 Operating Current 62 mA IDD25 Operating Current 125 mA IDD25M Operating Current 55 mA * Operating condition: WCLK = RCLK = 75 MHz; Data toggle rate = 20 MHz ISB33 Standby Current 4 mA ISB25 Standby Current 80 mA ISB25M Standby Current 25 mA * Standby condition: WCLK = RCLK = 0 MHz VOH Hi-level Output Voltage VOL Lo-level Output Voltage ILI Input Leakage Current (No pull-up or pull-down) ILO Output Leakage Current (No pull-up or pull-down) RL Input Pull-up/Pull-down Resistance ©2007~2010 by AverLogic Technologies, Corp. VD33-0.4 V 0.4 V -10 +10 μA -10 +10 μA 60 V1.2 KΩ 11/14 AL460 HD FIFO Datasheet 8 Mechanical Drawing – 128-PIN LQFP 8.1 14x14x1.4mm 128-Pin LQFP Package ©2007~2010 by AverLogic Technologies, Corp. V1.2 12/14 AL460 HD FIFO Datasheet ©2007~2010 by AverLogic Technologies, Corp. V1.2 13/14 AL460 HD FIFO Datasheet CONTACT INFORMATION Averlogic Technologies Corp. E-mail: [email protected] URL: http://www.averlogic.com ©2007~2010 by AverLogic Technologies, Corp. V1.2 14/14