GS40 40W AC-DC Single Output Desktop series Features : Universal AC input / Full range 3 pole AC inlet IEC320-C14 Protections: Short circuit / Overload / Over voltage Fully enclosed plastic case Approvals: UL / CUL / PSE / TUV / BSMI / CCC / CB / FCC / CE Class power (with earth pin) Pass LPS LED indicator for power on No load power consumption<0.3W ErP step2 compliant NRCan compliant Meet EISA 2007 (Energy Independence and Security Act) 2 years warranty ORDER NO. DC VOLTAGE GS40A05 Note.2 5V GS40A15 GS40A18 GS40A24 12V 15V 18V 24V GS40A48 48V 3.34A 2.67A 2.22A 1.67A 0.84A 0 ~ 0.84A 4.45A CURRENT RANGE 0 ~ 5A 0 ~ 5.34A 0 ~ 4.45A 0 ~ 3.34A 0 ~ 2.67A 0 ~ 2.22A 0 ~ 1.67A RATED POWER (max.) 25W 40W 40W 40W 40W 40W 40W 40W 100mVp-p 100mVp-p 100mVp-p 100mVp-p 150mVp-p 180mVp-p 240mVp-p RIPPLE & NOISE (max.) Note.3 100mVp-p VOLTAGE TOLERANCE Note.4 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.5% 2.5% LINE REGULATION 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 1.0% 5.0% 5.0% 5.0% 3.0% 3.0% 3.0% 2.5% 2.5% Note.5 Note.7 1000ms, 30ms / 230VAC 1000ms, 30ms / 115VAC at full load HOLD UP TIME (Typ.) VOLTAGE RANGE 50ms / 230VAC 15ms / 115VAC at full load 90 ~ 264VAC 127 ~ 370VDC FREQUENCY RANGE 47 ~ 63Hz EFFICIENCY (Typ.) 80.5% AC CURRENT (Typ.) INRUSH CURRENT (max.) 1A / 115VAC OVERLOAD PROTECTION OVER VOLTAGE 85.5% 85% PACKING PLUG CABLE 91% 92% 25.2 ~ 32.4V 50.4 ~ 64.8V 0.75mA / 240VAC 20% ~ 90% RH non-condensing -40 ~ +85 , 10 ~ 95% RH EMC IMMUNITY 90% 105 ~ 150% rated output power Protection type : Hiccup mode, recovers automatically after fault condition is removed 5.25 ~ 6.75V 7.88 ~ 10.13V 9.45 ~ 12.15V 12.6 ~ 16.2V 15.75 ~ 20.25V 18.9 ~ 24.3V Protection type : Shut down o/p voltage, re-power on to recover -30 ~ +60 MTBF DIMENSION 89.5% 65A / 230VAC WORKING HUMIDITY SAFETY STANDARDS SAFETY & WITHSTAND VOLTAGE ISOLATION RESISTANCE EMC (Note. 6) EMC EMISSION 89% 0.5A / 230VAC WORKING TEMP. ENVIRONMENT STORAGE TEMP., HUMIDITY TEMP. COEFFICIENT VIBRATION NOTE GS40A12 9V 5.34A LEAKAGE CURRENT(max.) CONNECTOR GS40A09 7.5V 5A SETUP, RISE TIME OTHERS GS40A07 RATED CURRENT LOAD REGULATION INPUT geprUfre Sicherheit GS40A05-P1J GS40A07-P1J GS40A09-P1J GS40A12-P1J GS40A15-P1J GS40A18-P1J GS40A24-P1J GS40A48-P1J SAFETY MODEL NO. OUTPUT TUV Rheinland Product Safety (except for 48V) SPECIFICATION (Refer to "Derating Curve") 0.03% / (0~50 ) 10 ~ 500Hz, 2G 10min./1cycle, period for 60min. each along X, Y, Z axes UL60950-1, TUV EN60950-1, BSMI CNS14336, CCC GB4943, J60950-1(except for 48V) approved I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25 / 70% RH Compliance to EN55022 class B, EN61000-3-2,3, FCC PART 15 / CISPR22 class B, CNS13438 class B, GB9254 class B, GB17625.1 Compliance to EN61000-4-2,3,4,5,6,8,11, light industry level, criteria A 711Khrs min. MIL-HDBK-217F(25 ) 125*50*31.5mm (L*W*H) 0.28Kg; 40pcs/12.02Kg/1.05CUFT Standard type P1J: 2.1 * 5.5 * 11mm, tuning fork type, center positive for stock ; Other type available by customer requested See page 2 ; Other type available by customer requested 1. All parameters are specified at 230VAC input, rated load, 25 70% RH ambient. 2. DC voltage: The output voltage set at point measure by plug terminal & 50% load. 3. Ripple & noise are measured at 20MHz by using a 12" twisted pair terminated with a 0.1uf & 47uf capacitor. 4. Tolerance: includes set up tolerance, line regulation, load regulation. 5. Line regulation is measured from low line to high line at rated load. 6. The power supply is considered as an independent unit, but the final equipment still need to re-confirm that the whole system complies with the EMC directives. 7. Length of set up time is measured at first cold start. Turning ON/OFF the power supply may lead to increase of the set up time. File Name:GS40-SPEC 2012-03-06 GS40 40W AC-DC Single Output Desktop Mechanical Specification Case No. 974A Unit:mm UL1185 16AWG 1000 50mm for 5 ~ 15V UL1185 18AWG 1800 50mm for 18 ~ 48V 125 31.5 series POWER LED 70 10mm 50 C"+" 11 0.5mm ID 2.1 x OD 5.5 Plug Assignment Standard plug: P1J P1J Derating Curve P/N OUTPUT CENTER + Static Characteristics 100 100 90 80 80 70 LOAD (%) LOAD (%) 60 40 20 -30 0 10 20 30 40 50 AMBIENT TEMPERATURE ( ) 60 70 (HORIZONTAL) 60 50 40 90 95 100 110 120 140 160 180 200 220 240 264 INPUT VOLTAGE (VAC) 60Hz File Name:GS40-SPEC 2012-03-06